HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 11322.1-2013 English PDF

US$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 11322.1-2013: Radio frequency cables -- Part 0: Guide to the design of detail specifications -- Section 1: Coaxial cables
Status: Valid

GB/T 11322.1: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 11322.1-2013English439 Add to Cart 4 days [Need to translate] Radio frequency cables -- Part 0: Guide to the design of detail specifications -- Section 1: Coaxial cables Valid GB/T 11322.1-2013
GB/T 11322.1-1997English639 Add to Cart 3 days [Need to translate] Radio-frequency cables. Part 0: Guide to the design of detail specifications. Section 1--Goaxial cables Obsolete GB/T 11322.1-1997
GB 11322-1989English599 Add to Cart 4 days [Need to translate] Guide to the design of radio-frequency coaxial cables Obsolete GB 11322-1989

PDF similar to GB/T 11322.1-2013


Standard similar to GB/T 11322.1-2013

GB/T 17737.101   GB/T 17737.102   GB/T 17737.100   GB/T 17737.11   GB/T 17737.113   GB/T 17737.10   

Basic data

Standard ID GB/T 11322.1-2013 (GB/T11322.1-2013)
Description (Translated English) Radio frequency cables -- Part 0: Guide to the design of detail specifications -- Section 1: Coaxial cables
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard L26
Classification of International Standard 33.120.10
Word Count Estimation 19,129
Older Standard (superseded by this standard) GB/T 11322.1-1997
Adopted Standard IEC 60096-0-1-2000, MOD
Regulation (derived from) National Standards Bulletin No. 25 of 2013
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the nominal outside diameter of the characteristic impedance and media design parameters such as the recommended values??. This standard applies to provide guidance with weaving, metal band or tubular outer conductor of the RF coax

GB/T 11322.1-2013: Radio frequency cables -- Part 0: Guide to the design of detail specifications -- Section 1: Coaxial cables


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Radio frequency cables Part 0.. Guide to the design of detail specifications Section 1.. Coaxial cables ICS 33.120.10 L26 National Standards of People's Republic of China Replacing GB/T 11322.1-1997 RF cables - Part 0. Detail Specification Design Guide The first one coaxial cable Radiofrequencycables-Part0. Guidetothedesignofdetailspecifications- (IEC 60096-0-1.2000, MOD) Issued on. 2013-12-17 2014-06-15 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 11322.1-1997 "RF cables - Part 0. Guide to the design specification details a coaxial cable". This section compared with the GB/T 11322.1-1997 main technical changes are as follows. --- Increased half air and foam FEP PE material values \u200b\u200b(see Table 4); --- Increasing the nominal outside diameter of 9.00mm medium as a preferred value (see Table 11); --- Recommended media outer diameter D2 is preferably a value of 0.87mm, 1.50mm, 2.95mm, 3.70mm, 4.80mm, 7.25 mm, 9.00mm, 11.50mm, 17.30mm (see 4.2); --- Increasing the characteristic impedance of different media types and media and the outside diameter of the tolerance value (see Table 13); --- Increasing the outer diameter of the medium is preferably solid PE values \u200b\u200bin 9.00mm and 11.50mm; foamed PE increased medium outer diameter of the preferred value 2.95mm, 3.70mm, 9.00mm, 11.50mm and 17.30mm (see Table 13). This section uses redrafted law revision adopted IEC 60096-0-1.2000 "radio frequency cables - Part 0. Detail Specification Design Guide The first one coaxial cable. " This part of IEC 60096-0-1.2000 technical differences are as follows. --- Increasing the nominal outside diameter of 9.00mm medium as a preferred value (see Table 11); --- Added "nominal outside diameter D2 of the medium is preferably 0.87mm, 1.50mm, 2.95mm, 3.70mm, 4.80mm, 7.25mm, 9.00mm, 11.50mm, 17.30mm "(see 4.2); --- Solid PE media to the outer diameter of the nominal value, increased 9.00mm and 11.50mm, tolerance of 0.40mm to 17.30mm 0.30mm; foam PE media Nominal outer diameter increased 2.95mm, 3.70mm, 9.00mm, 11.50mm and 17.30mm (see Table 13); --- Increase the formula F = 10D2 D1 (N) (see Table 24). To IEC 60096-0-1.2000 errors were the following modifications. --- 5.2 D1e = D3exp (-Z0 ε2/60) to D1e = D3exp (-Z0 ε2/60; --- Figure 1 k4 (W/m2K1) to k4 (W/m2K1.25); --- 6.3 C2 = ε21) 3Z0 · 104 (pF/m) to C2 = ε2 32) Z0 · 104 (pF/m). Please note that some of the content of this section may involve patents, the issuing authority of this standard does not assume the responsibility to identify these patents. This part is proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This section is under the jurisdiction of the National electronic equipment with a high-frequency cables and connectors Standardization Technical Committee (SAC/TC190). This section drafted by. China Electronics Technology Group Corporation No. 23 Research Institute. The main drafters of this section. high Wenhao, Zhang Jianping, Wu Zhengping. This part of the standard replaces the previous editions are. --- GB/T 11322-1989, GB/T 11322.1-1997. RF cables - Part 0. Detail Specification Design Guide The first one coaxial cable

1 Scope

This section provides the nominal characteristic impedance and the outer diameter of the media and other design parameters recommended values. This section applies to provide guidance with a braided metal strip or tubular outer conductor of the coaxial cable RF design.

2 symbol

The standard used in symbols and their meanings are shown in Table 1. Table 1 symbols and their meanings Symbol Meaning Unit Α total attenuation per unit length, 20 ℃ dB/m ΑT total attenuation per unit length, T ≠ 20 ℃ dB/m αx composition caused by attenuating portion x, 20 ℃ dB/m βx part of the braiding angle x ° (degrees) X density γx part of the material g/cm3 Loss angle rad δx part x material The relative dielectric constant εx x component of the material - Conductivity part Xx x material, 20 ℃ m/Ω \u200b\u200b· mm2 Σx thermal resistivity of the material component of x K · m/W Bx relevant components x weave density - co in free space propagation speed m/s X Cx part unit length capacitance pF/m dx part mm diameter x singlet Dx part x mm outer diameter Dxe electrical components of an effective diameter x mm Dxm average diameter part x mm The maximum allowable E2 medium voltage gradient (peak) kV/mm MHz frequency f hx relevant part of the cover layer thickness mm x

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 11322.1-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 11322.1-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 11322.1-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 11322.1-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 11322.1-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11322.1-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.