HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

FZ/T 92057-2010 English PDF

US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 92057-2010: General specification for batchers device
Status: Valid

FZ/T 92057: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
FZ/T 92057-2010English149 Add to Cart 2 days [Need to translate] General specification for batchers device Valid FZ/T 92057-2010
FZ/T 92057-1998English319 Add to Cart 3 days [Need to translate] General specification for batchers device Obsolete FZ/T 92057-1998

PDF similar to FZ/T 92057-2010


Standard similar to FZ/T 92057-2010

FZ/T 93048.1   FZ/T 93019   FZ/T 92059   FZ/T 92067   FZ/T 92061   

Basic data

Standard ID FZ/T 92057-2010 (FZ/T92057-2010)
Description (Translated English) General specification for batchers device
Sector / Industry Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard W95
Classification of International Standard 59.120.50
Word Count Estimation 5,526
Date of Issue 2010-12-29
Date of Implementation 2011-04-01
Older Standard (superseded by this standard) FZ/T 92057-1998
Quoted Standard GB/T 531.1; GB/T 9239.1-2006; GB/T 22801; FZ/T 90074; FZ/T 92059; FZ/T 92060
Regulation (derived from) Engineering (2010) No. 134
Issuing agency(ies) Ministry of Industry and Information Technology of the People's Republic of China
Summary This standard specifies the classification Takedown device, parameters, requirements and test methods. This standard applies to the fabric wound into a roll of dyeing and finishing machinery generic devices.

FZ/T 92057-2010: General specification for batchers device

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General specification for batchers device ICS 59.120.50 W95 People's Republic of China textile industry standards Replacing FZ/T 92057-1998 Takedown device General technical conditions Issued on. 2010-12-29 2011-04-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

Instead of the standard FZ/T 92057-1998 "Takedown device General technical conditions." This standard FZ/T 92057-1998 compared to the main changes are as follows. --- Adjustment and classification parameters. The standard proposed by China Textile Industry Association. This standard by the National Standardization Technical Committee Textile machinery and accessories. This standard was drafted. Jiangsu large Dyeing Machinery Co., Ltd., Jinjiang City, Ji Long Machinery Industrial Co., Ltd. Jiangsu red Dyeing Machinery Ltd., Wuxi Textile Machinery Research Institute. The main drafters of this standard. Chen Lijie, Ke Qingsong, Zhang Yi, Li Liping. This standard replaces the standards previously issued as follows. --- FZ/T 92057-1998. Takedown device General technical conditions

1 Scope

This standard specifies the classification cloth device parameters, requirements and test methods. This standard applies to the fabric dyeing and finishing machinery generic device wound into a roll.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 531.1 vulcanized rubber or thermoplastic rubber hardness test pushed Part 1. Shore hardness method (Shore hardness) GB/T 9239.1-2006 mechanical vibration steady state (rigid) rotor balance quality requirements - Part 1. specification of tolerance and balance test GB/T 22801 Textile dyeing and finishing machinery and machine guide roller main dimensions and requirements FZ/T 90074 textile machinery products Painting FZ/T 92059 widening device FZ/T 92060 suction side

3 Categories and Parameters

3.1 Classification Press cloth types. active center cloth, cloth surface drive. 3.2 Parameter Table 1. Table 1 Project Parameters Nominal width (B)/mm 1400,1600,1800,2000,2200,2400,2600,2800,3000,3200,3400,3600 Install the center distance (L)/mm L = B 200,300,500 The maximum roll diameter/mm 680,1000,1200,1500,1800 Winding speed/(m/min) 5 ~ 250

4 Requirements

4.1 Rack column centerline installation baseline deviation ≤1mm. 4.2 vertical rack post tolerance 1/1000 (benchmark level). 4.3 cloth roller, roller presser, the level of tolerance of the guide roller surface of 0.5/1000. 4.4 Each roller surface parallel installation of baseline tolerance 1mm. 4.5 guide roller shall comply with GB/T 22801 of. 4.6 tenter device shall comply with the provisions FZ/T 92059 of. 4.7 suction side should be consistent with the provisions of FZ/T 92060 of. 4.8 presser roller

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of FZ/T 92057-2010_English be delivered?

Answer: Upon your order, we will start to translate FZ/T 92057-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of FZ/T 92057-2010_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 92057-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version FZ/T 92057-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 92057-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.