HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189760 (2 Nov 2024)

YS/T 1042-2015 Related PDF English

YS/T 1042-2015 (YS/T1042-2015, YST 1042-2015, YST1042-2015) & related versions
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)See DetailStatusSimilar PDF
YS/T 1042-2015English259 Add to Cart 3 days Free-cutting copper alloy cold-drawn hollow profile YS/T 1042-2015 Valid YST 1042-2015



YS/T 1042-2015 (Drawn cutting copper alloy hollow sections) ICS 77.150.30 H62 People's Republic of China Nonferrous Metals Industry Standard Cutting copper alloy drawn hollow sections Issued on. 2015-04-30 2015-10-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released Foreword This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) and focal points. This standard is drafted by. Zhejiang Hailiang Co., Ltd., Technical and Economic Research Institute of Nonferrous Metals. This standard was drafted. Pinghuan Feng Wei Lian Yun, Sungang Feng, Cai Canming, the Soviets, Jiang Shaojun, Fengzhang Wei. Cutting copper alloy drawn hollow sections 1 Scope This standard specifies the cutting copper alloy drawn hollow sections of requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality The amount of the certificate and purchase order (or contract) content. This standard applies to cutting copper alloy drawn hollow sections (hereinafter referred to as profiles). 2 Normative references The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. RT Test Method. Test Part 1 GB/T 228.1-2010 metal material tensile GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan GB/T 3310 copper and copper alloy rod ultrasonic flaw detection method GB/T 5121 (all parts) of copper and copper alloys - GB/T 5231 and processing of copper and copper alloy grades and chemical composition GB/T 8888 heavy non-ferrous metal processing products, packaging, labeling, transportation, storage and quality certificate GB/T 10119 Determination of brass resistant to dezincification corrosion GB/T 10567.2 copper and copper alloy processing material residual stress - Ammonia test test method GB/T 26303.2 copper and copper alloy processing material Dimensions detection methods - Part 2. rods, wire, profiles GB/T 26306-2010 cutting copper alloy rod YS/T 336 copper, nickel and alloy pipe and bar fracture test YS/T 482 copper and copper alloy analysis photoemission spectroscopy YS/T 483 copper and copper alloy analysis X-ray fluorescence spectrometry (wavelength dispersion) YS/T 668 copper and copper alloy physical and chemical detection sampling method YS/T 815 methods for preparing copper and copper alloy mechanical and technological properties of the sample Determination of YS/T 910 brass copper content Iodimetry 3 Terms and definitions Eccentricity eccentricity The difference between the maximum and minimum wall thickness of the wall thickness and maximum wall thickness of the same cross-section and hollow profiles measured minimum wall thickness and percentage ratio. For polygons, wall thickness measurement should be perpendicular to the intermediate points on the outer plane. 4 Requirements 4.1 Categories 4.1.1 grade, status, specifications Product grades, status, size should be in accordance with Table 1. Product cross-sectional shape as shown in Fig. ......

BASIC DATA
Standard ID YS/T 1042-2015 (YS/T1042-2015)
Description (Translated English) Free-cutting copper alloy cold-drawn hollow profile
Sector / Industry Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard H62
Classification of International Standard 77.150.30
Word Count Estimation 11,198
Date of Issue 2015-04-30
Date of Implementation 2015-10-01
Quoted Standard GB/T 228.1-2010; GB/T 2828.1; GB/T 3310; GB/T 5121.1; GB/T 5121.2; GB/T 5121.3; GB/T 5121.4; GB/T 5121.5; GB/T 5121.6; GB/T 5121.7; GB/T 5121.8; GB/T 5121.9; GB/T 5121.10; GB/T 5121.11; GB/T 5121.12; GB/T 5121.13; GB/T 5121.14; GB/T 5121.15; GB/T 5121.16; GB/T 5121.17; GB/T 5121.18; GB/T 5121.19; GB/T 5121.20; GB/T 5121.21; GB/T 5121.22; GB/T 5121.23; GB/T 5121.24; GB/T 5121.25; GB/T 5121.26; GB/T 5121.27; GB/T 5121.28; GB/T 5121.29; GB/T 5231; GB/T 8888; GB/T 10119; GB/T 10567.2; GB/T 26303.2; GB/T 26306-2010; YS/T 336; YS/T 482; YS/T 483; YS/T 668; YS/T 815; YS/T 910
Drafting Organization Zhejiang Hailiang Co., Ltd., Non - ferrous Metal Technical & Economic Research Institute
Administrative Organization National Non-Ferrous Metals Standardization Technical Committee (SAC/TC 243)
Regulation (derived from) Ministry of Industry and Information Technology Announcement (2015 No. 28)
Proposing organization National Non-Ferrous Metals Standardization Technical Committee (SAC/TC 243)
Issuing agency(ies) Ministry of Industry and Information Technology of the People's Republic of China
Summary This Standard specifies the cutting copper alloy drawn hollow sections of requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificate and purchase order (or contract) content. This Standard applies to cutting copper alloy drawn hollow sections (hereinafter referred to as profiles).