SJ/T 11363-2006 PDF English
US$70.00 · In stock · Download in 9 secondsSJ/T 11363-2006: Requirements for concentration limits for certain hazardous substances in electronic information products Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Obsolete
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| SJ/T 11363-2006 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Requirements for concentration limits for certain hazardous substances in electronic information products
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: SJ/T 11363-2006
SJ/T 11363-2006: Requirements for concentration limits for certain hazardous substances in electronic information products
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/SJT11363-2006
SJ
ELECTRONIC INDUSTRY STANDARD
ICS 31.020
L10
Registration number.
Requirements for concentration limits for certain
hazardous substances in electronic information products
Issued on. NOVEMBER 06, 2006
Implemented on. NOVEMBER 06, 2006
Issued by. Ministry of Industry and Information Technology of PRC
Table of Contents
Foreword... 3
Introduction... 4
1 Scope... 5
2 Normative references... 5
3 Terms and definitions... 5
4 Requirements... 7
5 Rules of detection... 8
6 Qualification judgement... 8
Appendix A (Informative) Participating drafting organizations of this standard 9
Foreword
The Appendix A of this standard is informative.
This standard was proposed by the China Electronic Technical Standardization
Institute.
The main drafting organization of this standard. Ministry of Information Industry
Electronics Fifth Research Institute.
The participating drafting organizations of this standard. REFER to Appendix
A.
The main drafters of this standard. Wang Xiaohan, Luo Daojun.
1 Scope
This standard specifies the maximum allowable concentration of the toxic and
hazardous substances which are contained in the electronic information
products.
This standard is applicable to the electronic information products which are
covered in the pollution control key management catalogue as specified in the
Electronic information product pollution control management method.
2 Normative references
The provisions in following documents become the provisions of this Standard
through reference in this Standard. For the dated references, the subsequent
amendments (excluding corrections) or revisions do not apply to this Standard;
however, parties who reach an agreement based on this Standard are
encouraged to study if the latest versions of these documents are applicable.
For undated references, the latest edition of the referenced document applies.
SJ/T 11365-2006 Testing methods for hazardous substances in electronic
information products
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Substance
It refers to the elementary substance or compound which is existed in
nature AND is composed of chemical elements.
3.2
Hazardous substance
HS
It refers to the lead, mercury, cadmium, hexavalent chromium,
polybrominated biphenyls (PBB), and polybrominated diphenyl ethers
(PBDE, excluding decabromodiphenyl ether) as contained in the electronic
information products.
3.9
Components
It refers to the structural unit in the electronic information product which has
a certain function or application, such as components, chassis, bracket,
screws, switches, wires, and so on.
3.10
Test unit
It refers to the sample which can be directly submitted for quantitative
detection without requiring further mechanical disassembly.
4 Requirements
The electronic information products are generally composed of components
and materials. AND its basic composition unit is material. To control the use of
the toxic and hazardous substance, first CLASSIFY these composition units of
the electronic information products in accordance with Table 1.
5 Rules of detection
5.1 Detection unit
The detection unit shall be each composition unit constituting the electronic
information product as listed in Table 1.
6 Qualification judgement
If the hazardous substance of all the composition units in the electronic
information product complies with the requirements of Table 2 after detection,
this electronic information product is deemed as qualified;
Appendix A
(Informative)
Participating drafting organizations of this standard
(In the order of acronym)
SJ/T 11363-2006
SJ
ELECTRONIC INDUSTRY STANDARD
ICS 31.020
L10
Registration number.
Requirements for concentration limits for certain
hazardous substances in electronic information products
Issued on. NOVEMBER 06, 2006
Implemented on. NOVEMBER 06, 2006
Issued by. Ministry of Industry and Information Technology of PRC
Table of Contents
Foreword... 3
Introduction... 4
1 Scope... 5
2 Normative references... 5
3 Terms and definitions... 5
4 Requirements... 7
5 Rules of detection... 8
6 Qualification judgement... 8
Appendix A (Informative) Participating drafting organizations of this standard 9
Foreword
The Appendix A of this standard is informative.
This standard was proposed by the China Electronic Technical Standardization
Institute.
The main drafting organization of this standard. Ministry of Information Industry
Electronics Fifth Research Institute.
The participating drafting organizations of this standard. REFER to Appendix
A.
The main drafters of this standard. Wang Xiaohan, Luo Daojun.
1 Scope
This standard specifies the maximum allowable concentration of the toxic and
hazardous substances which are contained in the electronic information
products.
This standard is applicable to the electronic information products which are
covered in the pollution control key management catalogue as specified in the
Electronic information product pollution control management method.
2 Normative references
The provisions in following documents become the provisions of this Standard
through reference in this Standard. For the dated references, the subsequent
amendments (excluding corrections) or revisions do not apply to this Standard;
however, parties who reach an agreement based on this Standard are
encouraged to study if the latest versions of these documents are applicable.
For undated references, the latest edition of the referenced document applies.
SJ/T 11365-2006 Testing methods for hazardous substances in electronic
information products
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Substance
It refers to the elementary substance or compound which is existed in
nature AND is composed of chemical elements.
3.2
Hazardous substance
HS
It refers to the lead, mercury, cadmium, hexavalent chromium,
polybrominated biphenyls (PBB), and polybrominated diphenyl ethers
(PBDE, excluding decabromodiphenyl ether) as contained in the electronic
information products.
3.9
Components
It refers to the structural unit in the electronic information product which has
a certain function or application, such as components, chassis, bracket,
screws, switches, wires, and so on.
3.10
Test unit
It refers to the sample which can be directly submitted for quantitative
detection without requiring further mechanical disassembly.
4 Requirements
The electronic information products are generally composed of components
and materials. AND its basic composition unit is material. To control the use of
the toxic and hazardous substance, first CLASSIFY these composition units of
the electronic information products in accordance with Table 1.
5 Rules of detection
5.1 Detection unit
The detection unit shall be each composition unit constituting the electronic
information product as listed in Table 1.
6 Qualification judgement
If the hazardous substance of all the composition units in the electronic
information product complies with the requirements of Table 2 after detection,
this electronic information product is deemed as qualified;
Appendix A
(Informative)
Participating drafting organizations of this standard
(In the order of acronym)
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of SJ/T 11363-2006 be delivered?Answer: The full copy PDF of English version of SJ/T 11363-2006 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of SJ/T 11363-2006_English with my colleagues?Answer: Yes. The purchased PDF of SJ/T 11363-2006_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- SJ/T 11363-2006 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of SJ/T 11363-2006?A step-by-step guide to download PDF of SJ/T 11363-2006_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "SJ/T 11363-2006".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|