QB/T 3000-2008 PDF English
US$105.00 · In stock · Download in 9 secondsQB/T 3000-2008: Mat - Bathroom mat and door mat Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| QB/T 3000-2008 | English | 105 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Mat - Bathroom mat and door mat
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: QB/T 3000-2008
QB/T 3000-2008: Mat - Bathroom mat and door mat---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/QBT3000-2008
QB
LIGHT INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 59.080.60
Classification No.. W56
Filing No.. 24987-2008
Mat - Bathroom mat and door mat
Issued on. JUNE 16, 2008
Implemented on. DECEMBER 01, 2008
Issued by. National Development and Reform Commission of PRC
Table of Contents
Foreword... 3
Introduction... 4
1 Scope... 5
2 Normative references... 5
3 Terms and definitions... 6
4 Product categories... 7
5 Requirements... 7
6 Test method... 9
7 Inspection rules... 11
8 Signs, labels, packaging, transportation, storage... 12
Appendix A (Normative) Aging resistance evaluation method... 14
Appendix B (Informative) Anti-slip guidelines for using bathroom mats... 16
Foreword
Appendix A of this standard is a normative appendix. Appendix B is an informative
appendix.
This standard was proposed by China National Light Industry Council.
This standard shall be under the jurisdiction of the National Carpet Standardization
Technical Committee.
Responsible drafting organization of this standard. Carpet Professional Committee of
China Arts and Crafts Association.
Participated drafting organization of this standard. Guangzhou Mengdumei Fabric Co.,
Ltd., Zhejiang Dada Household Products Co., Ltd., Weihai Shanhua Carpet Group Co.,
Ltd., Liyang Kaili Carpet Material Co., Ltd., Ningbo Huiduo Weaving Co., Ltd., Tianjin
Dongfanglan Treasure Carpet Research Center.
The main drafters of this standard. Zhang Yufen, Li Chengri, Lin Zhongyi, Mu Lin,
Tong Zili, Dong Haizhou, Li Xiaowen.
This standard is published for the first time.
1 Scope
This standard specifies the terms and definitions, product classification, requirements,
test methods, inspection rules and signs, packaging, transportation, storage of mats used
in bathrooms and in front of doors (hereinafter referred to as "mats").
This standard is applicable to the quality judgment of small block mats, which are used
in bathrooms and in front of doors, etc., made of chemical fiber, cotton, wool, blended
fiber mat surface raw materials. The mats, which are made of other fiber materials, can
also be used as a reference.
2 Normative references
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For the dated references, the subsequent amendments
(excluding corrections) or revisions do not apply to this Standard; however, parties who
reach an agreement based on this Standard are encouraged to study if the latest versions
of these documents are applicable. For undated references, the latest edition of the
referenced document applies.
GB/T 2910 Textile - Binary fibre mixtures - Quantitative chemical analysis (GB/T
2910-1997, eqv ISO 1833.1977)
GB/T 2911 Textiles - Ternary fibre mixtures - Quantitative analysis (GB/T 2911-
1997, eqv ISO 5088.1976)
GB/T 3512 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat
resistance tests - Air-oven method (GB/T 3512-2001, eqv ISO 188.1998)
GB/T 3920 Textiles - Tests for colour fastness - Colour fastness to rubbing (GB/T
3920-1997, eqv ISO105-X12.1993)
GB 6529 Textiles - Standard atmospheres for conditioning and testing
GB/T 8427 Textiles - Tests for colour fastness - Colour fastness to artificial light.
Xenon arc fading lamp test (GB 8427-1998, eqv ISO 105-B02.1994)
GB/T 12490 Textiles - Testing method for colour fastness to domestic and
commercial laundering (GB/T 12490-1990, neq ISO 105/C06-1987)
3 Terms and definitions
The following terms and definitions apply to this standard.
3.1
Mat
Machine-made or handmade mat, piled or not piled, backed or unbacked, small
carpet tiles, of textile fibers.
It is mainly placed in front of doors of bathrooms and toilets. Depending on the place
of use, it plays various roles such as decoration, pollution resistance, water
resistance. Dimensions are not specified.
Note. Mats are different from block mats. Block mats are mainly placed in the center of the
room or in a certain part of the room. Most of them are decorative pattern products, which
have different sizes AND are often used as mats on top of the mats.
4 Product categories
4.1 Classification by use of mats
4.2 Classification according to carpet backing and coating treatment
5 Requirements
5.1 Internal quality
The structure and basic technical requirements of the mat shall meet the requirements
in Table 1.
5.2 Appearance quality
The technical requirements for the appearance quality of mats shall meet the
requirements in Table 2.
5.3 Contract requirements
If the supplier and buyer have other requirements, they can be implemented according
to the contract or agreement.
5.4 Requirements for additional optional features
When having requirements for adding additional characteristics to the mat product, it
shall comply with the relevant provisions of 5.4.1 and 5.4.2.
6 Test method
6.1 Appearance quality
Inspectors shall carry out visual inspection and hand feeling inspection on the mat
surface, mat edge, mat backing, according to the requirements in Table 2.
6.2 Internal quality
6.2.1 Test conditions (unless otherwise specified)
The standard atmosphere for humidity conditioning and testing adopts the standard
atmosphere for secondary testing, which is specified in GB 6529, which as a
temperature of (20 ± 2) °C and a relative humidity of (65 ± 3)%.
6.2.8 Color fastness to light. xenon arc
Test according to GB/T 8427.
6.2.9 Color fastness to rubbing
Test according to GB/T 3920.
6.2.10 Color fastness to washing
Carry out the test according to GB/T 12490 (test condition A2S).
6.2.11 Anti-slip performance
Carry out wet friction test, according to ASTM F 609.
Change the dry friction to wet friction as required. Put the specimen on the test plane.
Use distilled water as lubricant, to conduct the test.
6.2.13 Aging resistance
Test according to GB/T 3512.See Appendix A for test evaluation methods.
7 Inspection rules
7.1 Inspection classification
Product inspection is divided into exit-factory inspection and type inspection.
7.1.1 Exit-factory inspection (delivery inspection)
7.2 Inspection items
7.2.1 Exit-factory inspection items
The exit-factory inspection items include appearance quality (Table 2) and dimensions
(length x width) in internal quality (Table 1), all of which must be 100% inspected.
7.4 Judgment rules
Product grades are evaluated according to the inspection results of internal quality and
appearance quality; the item of the lowest grade is used to determine the grade; products
lower than qualified are unqualified.
7.5 Re-inspection rules
In the appearance quality inspection items, if one piece is unqualified, it is allowed to
double the sampling from this batch of products. If all of them pass, the appearance
quality of this batch of products will be judged to be unqualified.
8 Signs, labels, packaging, transportation, storage Each mat must be labeled.
8.1 Product label
The content that needs to be indicated on the product label.
8.2 Additional information
8.3 Packaging sign
Contents that need to be marked on the packaging sign.
8.4 Packaging
The packaging of mats shall ensure that the product is not damaged, it can prevent dirt
and moisture, and it is convenient for storage and transportation.
8.5 Transport, storage
Mats shall not be under heavy pressure during transportation and storage. It shall avoid
rain and long-term exposure to the sun. Pay attention to moisture-proof and fire-proof.
Appendix A
(Normative)
Aging resistance evaluation method
Mat back-covered with natural rubber are subjected to the hot air accelerated aging test.
The sensory test is carried out, to evaluate the discoloration, stickiness or cracking of
the backing coating during aging.
A.1 Specimen
Take at least one large specimen of 10 cm x 30 cm from the mat sample. Then divide it
into six small specimens of 10 cm x 5 cm each. The specimen layout is as shown in
Figure A.1.
QB/T 3000-2008
QB
LIGHT INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 59.080.60
Classification No.. W56
Filing No.. 24987-2008
Mat - Bathroom mat and door mat
Issued on. JUNE 16, 2008
Implemented on. DECEMBER 01, 2008
Issued by. National Development and Reform Commission of PRC
Table of Contents
Foreword... 3
Introduction... 4
1 Scope... 5
2 Normative references... 5
3 Terms and definitions... 6
4 Product categories... 7
5 Requirements... 7
6 Test method... 9
7 Inspection rules... 11
8 Signs, labels, packaging, transportation, storage... 12
Appendix A (Normative) Aging resistance evaluation method... 14
Appendix B (Informative) Anti-slip guidelines for using bathroom mats... 16
Foreword
Appendix A of this standard is a normative appendix. Appendix B is an informative
appendix.
This standard was proposed by China National Light Industry Council.
This standard shall be under the jurisdiction of the National Carpet Standardization
Technical Committee.
Responsible drafting organization of this standard. Carpet Professional Committee of
China Arts and Crafts Association.
Participated drafting organization of this standard. Guangzhou Mengdumei Fabric Co.,
Ltd., Zhejiang Dada Household Products Co., Ltd., Weihai Shanhua Carpet Group Co.,
Ltd., Liyang Kaili Carpet Material Co., Ltd., Ningbo Huiduo Weaving Co., Ltd., Tianjin
Dongfanglan Treasure Carpet Research Center.
The main drafters of this standard. Zhang Yufen, Li Chengri, Lin Zhongyi, Mu Lin,
Tong Zili, Dong Haizhou, Li Xiaowen.
This standard is published for the first time.
1 Scope
This standard specifies the terms and definitions, product classification, requirements,
test methods, inspection rules and signs, packaging, transportation, storage of mats used
in bathrooms and in front of doors (hereinafter referred to as "mats").
This standard is applicable to the quality judgment of small block mats, which are used
in bathrooms and in front of doors, etc., made of chemical fiber, cotton, wool, blended
fiber mat surface raw materials. The mats, which are made of other fiber materials, can
also be used as a reference.
2 Normative references
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For the dated references, the subsequent amendments
(excluding corrections) or revisions do not apply to this Standard; however, parties who
reach an agreement based on this Standard are encouraged to study if the latest versions
of these documents are applicable. For undated references, the latest edition of the
referenced document applies.
GB/T 2910 Textile - Binary fibre mixtures - Quantitative chemical analysis (GB/T
2910-1997, eqv ISO 1833.1977)
GB/T 2911 Textiles - Ternary fibre mixtures - Quantitative analysis (GB/T 2911-
1997, eqv ISO 5088.1976)
GB/T 3512 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat
resistance tests - Air-oven method (GB/T 3512-2001, eqv ISO 188.1998)
GB/T 3920 Textiles - Tests for colour fastness - Colour fastness to rubbing (GB/T
3920-1997, eqv ISO105-X12.1993)
GB 6529 Textiles - Standard atmospheres for conditioning and testing
GB/T 8427 Textiles - Tests for colour fastness - Colour fastness to artificial light.
Xenon arc fading lamp test (GB 8427-1998, eqv ISO 105-B02.1994)
GB/T 12490 Textiles - Testing method for colour fastness to domestic and
commercial laundering (GB/T 12490-1990, neq ISO 105/C06-1987)
3 Terms and definitions
The following terms and definitions apply to this standard.
3.1
Mat
Machine-made or handmade mat, piled or not piled, backed or unbacked, small
carpet tiles, of textile fibers.
It is mainly placed in front of doors of bathrooms and toilets. Depending on the place
of use, it plays various roles such as decoration, pollution resistance, water
resistance. Dimensions are not specified.
Note. Mats are different from block mats. Block mats are mainly placed in the center of the
room or in a certain part of the room. Most of them are decorative pattern products, which
have different sizes AND are often used as mats on top of the mats.
4 Product categories
4.1 Classification by use of mats
4.2 Classification according to carpet backing and coating treatment
5 Requirements
5.1 Internal quality
The structure and basic technical requirements of the mat shall meet the requirements
in Table 1.
5.2 Appearance quality
The technical requirements for the appearance quality of mats shall meet the
requirements in Table 2.
5.3 Contract requirements
If the supplier and buyer have other requirements, they can be implemented according
to the contract or agreement.
5.4 Requirements for additional optional features
When having requirements for adding additional characteristics to the mat product, it
shall comply with the relevant provisions of 5.4.1 and 5.4.2.
6 Test method
6.1 Appearance quality
Inspectors shall carry out visual inspection and hand feeling inspection on the mat
surface, mat edge, mat backing, according to the requirements in Table 2.
6.2 Internal quality
6.2.1 Test conditions (unless otherwise specified)
The standard atmosphere for humidity conditioning and testing adopts the standard
atmosphere for secondary testing, which is specified in GB 6529, which as a
temperature of (20 ± 2) °C and a relative humidity of (65 ± 3)%.
6.2.8 Color fastness to light. xenon arc
Test according to GB/T 8427.
6.2.9 Color fastness to rubbing
Test according to GB/T 3920.
6.2.10 Color fastness to washing
Carry out the test according to GB/T 12490 (test condition A2S).
6.2.11 Anti-slip performance
Carry out wet friction test, according to ASTM F 609.
Change the dry friction to wet friction as required. Put the specimen on the test plane.
Use distilled water as lubricant, to conduct the test.
6.2.13 Aging resistance
Test according to GB/T 3512.See Appendix A for test evaluation methods.
7 Inspection rules
7.1 Inspection classification
Product inspection is divided into exit-factory inspection and type inspection.
7.1.1 Exit-factory inspection (delivery inspection)
7.2 Inspection items
7.2.1 Exit-factory inspection items
The exit-factory inspection items include appearance quality (Table 2) and dimensions
(length x width) in internal quality (Table 1), all of which must be 100% inspected.
7.4 Judgment rules
Product grades are evaluated according to the inspection results of internal quality and
appearance quality; the item of the lowest grade is used to determine the grade; products
lower than qualified are unqualified.
7.5 Re-inspection rules
In the appearance quality inspection items, if one piece is unqualified, it is allowed to
double the sampling from this batch of products. If all of them pass, the appearance
quality of this batch of products will be judged to be unqualified.
8 Signs, labels, packaging, transportation, storage Each mat must be labeled.
8.1 Product label
The content that needs to be indicated on the product label.
8.2 Additional information
8.3 Packaging sign
Contents that need to be marked on the packaging sign.
8.4 Packaging
The packaging of mats shall ensure that the product is not damaged, it can prevent dirt
and moisture, and it is convenient for storage and transportation.
8.5 Transport, storage
Mats shall not be under heavy pressure during transportation and storage. It shall avoid
rain and long-term exposure to the sun. Pay attention to moisture-proof and fire-proof.
Appendix A
(Normative)
Aging resistance evaluation method
Mat back-covered with natural rubber are subjected to the hot air accelerated aging test.
The sensory test is carried out, to evaluate the discoloration, stickiness or cracking of
the backing coating during aging.
A.1 Specimen
Take at least one large specimen of 10 cm x 30 cm from the mat sample. Then divide it
into six small specimens of 10 cm x 5 cm each. The specimen layout is as shown in
Figure A.1.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of QB/T 3000-2008 be delivered?Answer: The full copy PDF of English version of QB/T 3000-2008 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of QB/T 3000-2008_English with my colleagues?Answer: Yes. The purchased PDF of QB/T 3000-2008_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- QB/T 3000-2008 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of QB/T 3000-2008?A step-by-step guide to download PDF of QB/T 3000-2008_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "QB/T 3000-2008".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|