QB/T 2902-2007 PDF English
US$175.00 · In stock · Download in 9 secondsQB/T 2902-2007: Art candle Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| QB/T 2902-2007 | English | 175 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Art candle
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: QB/T 2902-2007
QB/T 2902-2007: Art candle---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/QBT2902-2007
QB
LIGHT INDUSTRY STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 71.100.35
Classification No.. Y44
Filing No.. 22727-2008
Art candle
Issued on. DECEMBER 03, 2007
Implemented on. JUNE 01, 2008
Issued by. National Development and Reform Commission of PRC
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative references... 4
3 Terms and definitions... 4
4 Requirements... 4
5 Test method... 5
6 Inspection rules... 7
7 Marking, packaging, transportation, storage, shelf life... 8
Foreword
Art candle series products are one of the main products in the candle industry.
In order to ensure product quality, this industry standard is formulated.
This standard was compiled, with reference to the German standard RAL-GZ
041/1 (2005) "General quality and inspection specifications for candles", the
American Society for Testing and Materials standard ASTM F 2417-2004
"Standard specification for fire safety for candles".
This standard was proposed by the China National Light Industry Council.
This standard shall be under the jurisdiction of the National Standardization
Center for Toothpaste and Wax Products.
The main drafting organizations of this standard. Qingdao Jinwang Applied
Chemical Co., Ltd., Zhongshan Zhongnan Candle Co., Ltd., Dongguan
Quanwei Candle Co., Ltd., Dingzhou Jinqiao Candle Co., Ltd., National Light
Industry Toothpaste Wax Products Quality Supervision and Testing Center.
The main drafters of this standard. Jiang Ying, Kan Shengdong, Wang Chuanlei.
This standard was issued for the first time.
Art candle
1 Scope
This standard specifies the terms and definitions, requirements, test methods,
inspection rules and signs, packaging, transportation, storage, shelf life of art
candles.
This standard applies to art candle products.
2 Normative references
The provisions in following documents become the provisions of this Standard
through reference in this Standard. For the dated references, the subsequent
amendments (excluding corrections) or revisions do not apply to this Standard;
however, parties who reach an agreement based on this Standard are
encouraged to study if the latest versions of these documents are applicable.
For undated references, the latest edition of the referenced document applies.
GB/T 191 Packaging - Pictorial marking for handling of goods
Order No.75 of the General Administration of Quality Supervision, Inspection
and Quarantine of the People's Republic of China "Measures for the
Supervision and Administration of the Measurement of Quantitative
Packaging Commodities"
3 Terms and definitions
The following terms and definitions apply to this standard.
4 Requirements
4.1 Performance Indicators
The performance indicators of art candles shall meet the requirements of Table
1.
4.2 Net content
The net content shall comply with the provisions of Order No.75 of the General
Administration of Quality and Children Supervision, Inspection and Quarantine.
5 Test method
5.1 Color
Take 4 samples. Inspect them visually.
5.2 Odor
Take 4 samples. Sniff it.
5.3 Exposed length of candle wick
Take 4 samples. Use a vernier caliper to make measurement. Each candle shall
meet the standard requirements. Take the maximum value of the test results
among the 4 candles, as the final test result.
5.4 Thermal stability
5.5.1 Main instruments
5.6 Product placement stability
Take 4 samples. Place them on an inclined surface of 10°, one by one. Observe
whether there is any overturning phenomenon, at any placement angle.
5.7 Combustion performance
Take 4 samples. Light the candle, for 15 minutes, at room temperature of 15 °C
~ 25 °C, without strong air convection. Observe the burning condition, until it is
completely extinguished. Use a steel ruler to measure the flame height. Take
the maximum of the test results, among the 4 candles, as the final test result.
5.8 Burning time
Take 4 samples. Use a timer, to measure the time taken for the candle, FROM
ignition TO burning to 10 mm or 20 mm from the bottom of the candle (refer to
note 5.7 for the test), under the condition of room temperature 15 °C ~ 25 °C,
without strong air convection.
5.9 Burning afterglow
Take 4 samples. Ignite the candle for 30 minutes, at a room temperature of
15 °C ~ 25 °C, without strong air convection. Measure the time, FROM the
extinguishing of candle wick TO smoke-free. Relight the candle. Repeat the
above test. Take the maximum value of the two test results, as the final test
result.
6 Inspection rules
6.1 Inspection classification
Product inspection is divided into exit-factory inspection and type inspection.
6.1.1 Exit-factory inspection
Each batch of products must pass the inspection, by the inspection department
of the manufacturer, before leaving the factory. The exit-factory inspection items
are color, odor, candle wick's exposed length, combustion performance.
6.1.3 Group-batch and sampling
The products, which are produced in the same batch, by the same batch of
materials and specifications, form one batch. Take 5 small packages, from each
batch of products. After passing the inspection by the inspection department of
manufacturer, AND attached with the product qualification certificate, it can be
exit-factory.
6.2 Judgment rules
If there is an indicator in the inspection result, that does not meet the
requirements of this standard, it may double the sampling quantity, to carry out
reinspection. For unqualified items, the results of the re-inspection shall prevail.
If there is still one indicator, in the re-inspection result, that does not meet the
requirements of this standard, it will be judged as unqualified.
7 Marking, packaging, transportation, storage, shelf life
7.1 Marking
Product packaging and transportation packaging shall meet the requirements
of GB/T 191.
7.1.1 The following signs shall be displayed on the sales package. In special
cases, it shall be based on customer requirements.
7.1.2 The transportation package shall have the following signs. In special
circumstances, it can be based on customer requirements.
7.2 Packaging
In the case of not damaging the quality of the product, the product's packaging
form and packaging materials are determined, by both the supplier and the
buyer.
7.3 Transportation
Avoid violent vibration, impact, sun and rain exposure, during transportation.
Handle with care when loading and unloading.
7.4 Storage
The product shall be stored in a ventilated and dry warehouse below 35 °C.
Avoid being close to heat sources. When stacking, it shall not directly touch the
ground and wall. The stacking height shall not exceed 2 m.
7.5 Shelf life
The date shall be marked on the visible surface.
QB/T 2902-2007
QB
LIGHT INDUSTRY STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 71.100.35
Classification No.. Y44
Filing No.. 22727-2008
Art candle
Issued on. DECEMBER 03, 2007
Implemented on. JUNE 01, 2008
Issued by. National Development and Reform Commission of PRC
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative references... 4
3 Terms and definitions... 4
4 Requirements... 4
5 Test method... 5
6 Inspection rules... 7
7 Marking, packaging, transportation, storage, shelf life... 8
Foreword
Art candle series products are one of the main products in the candle industry.
In order to ensure product quality, this industry standard is formulated.
This standard was compiled, with reference to the German standard RAL-GZ
041/1 (2005) "General quality and inspection specifications for candles", the
American Society for Testing and Materials standard ASTM F 2417-2004
"Standard specification for fire safety for candles".
This standard was proposed by the China National Light Industry Council.
This standard shall be under the jurisdiction of the National Standardization
Center for Toothpaste and Wax Products.
The main drafting organizations of this standard. Qingdao Jinwang Applied
Chemical Co., Ltd., Zhongshan Zhongnan Candle Co., Ltd., Dongguan
Quanwei Candle Co., Ltd., Dingzhou Jinqiao Candle Co., Ltd., National Light
Industry Toothpaste Wax Products Quality Supervision and Testing Center.
The main drafters of this standard. Jiang Ying, Kan Shengdong, Wang Chuanlei.
This standard was issued for the first time.
Art candle
1 Scope
This standard specifies the terms and definitions, requirements, test methods,
inspection rules and signs, packaging, transportation, storage, shelf life of art
candles.
This standard applies to art candle products.
2 Normative references
The provisions in following documents become the provisions of this Standard
through reference in this Standard. For the dated references, the subsequent
amendments (excluding corrections) or revisions do not apply to this Standard;
however, parties who reach an agreement based on this Standard are
encouraged to study if the latest versions of these documents are applicable.
For undated references, the latest edition of the referenced document applies.
GB/T 191 Packaging - Pictorial marking for handling of goods
Order No.75 of the General Administration of Quality Supervision, Inspection
and Quarantine of the People's Republic of China "Measures for the
Supervision and Administration of the Measurement of Quantitative
Packaging Commodities"
3 Terms and definitions
The following terms and definitions apply to this standard.
4 Requirements
4.1 Performance Indicators
The performance indicators of art candles shall meet the requirements of Table
1.
4.2 Net content
The net content shall comply with the provisions of Order No.75 of the General
Administration of Quality and Children Supervision, Inspection and Quarantine.
5 Test method
5.1 Color
Take 4 samples. Inspect them visually.
5.2 Odor
Take 4 samples. Sniff it.
5.3 Exposed length of candle wick
Take 4 samples. Use a vernier caliper to make measurement. Each candle shall
meet the standard requirements. Take the maximum value of the test results
among the 4 candles, as the final test result.
5.4 Thermal stability
5.5.1 Main instruments
5.6 Product placement stability
Take 4 samples. Place them on an inclined surface of 10°, one by one. Observe
whether there is any overturning phenomenon, at any placement angle.
5.7 Combustion performance
Take 4 samples. Light the candle, for 15 minutes, at room temperature of 15 °C
~ 25 °C, without strong air convection. Observe the burning condition, until it is
completely extinguished. Use a steel ruler to measure the flame height. Take
the maximum of the test results, among the 4 candles, as the final test result.
5.8 Burning time
Take 4 samples. Use a timer, to measure the time taken for the candle, FROM
ignition TO burning to 10 mm or 20 mm from the bottom of the candle (refer to
note 5.7 for the test), under the condition of room temperature 15 °C ~ 25 °C,
without strong air convection.
5.9 Burning afterglow
Take 4 samples. Ignite the candle for 30 minutes, at a room temperature of
15 °C ~ 25 °C, without strong air convection. Measure the time, FROM the
extinguishing of candle wick TO smoke-free. Relight the candle. Repeat the
above test. Take the maximum value of the two test results, as the final test
result.
6 Inspection rules
6.1 Inspection classification
Product inspection is divided into exit-factory inspection and type inspection.
6.1.1 Exit-factory inspection
Each batch of products must pass the inspection, by the inspection department
of the manufacturer, before leaving the factory. The exit-factory inspection items
are color, odor, candle wick's exposed length, combustion performance.
6.1.3 Group-batch and sampling
The products, which are produced in the same batch, by the same batch of
materials and specifications, form one batch. Take 5 small packages, from each
batch of products. After passing the inspection by the inspection department of
manufacturer, AND attached with the product qualification certificate, it can be
exit-factory.
6.2 Judgment rules
If there is an indicator in the inspection result, that does not meet the
requirements of this standard, it may double the sampling quantity, to carry out
reinspection. For unqualified items, the results of the re-inspection shall prevail.
If there is still one indicator, in the re-inspection result, that does not meet the
requirements of this standard, it will be judged as unqualified.
7 Marking, packaging, transportation, storage, shelf life
7.1 Marking
Product packaging and transportation packaging shall meet the requirements
of GB/T 191.
7.1.1 The following signs shall be displayed on the sales package. In special
cases, it shall be based on customer requirements.
7.1.2 The transportation package shall have the following signs. In special
circumstances, it can be based on customer requirements.
7.2 Packaging
In the case of not damaging the quality of the product, the product's packaging
form and packaging materials are determined, by both the supplier and the
buyer.
7.3 Transportation
Avoid violent vibration, impact, sun and rain exposure, during transportation.
Handle with care when loading and unloading.
7.4 Storage
The product shall be stored in a ventilated and dry warehouse below 35 °C.
Avoid being close to heat sources. When stacking, it shall not directly touch the
ground and wall. The stacking height shall not exceed 2 m.
7.5 Shelf life
The date shall be marked on the visible surface.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of QB/T 2902-2007 be delivered?Answer: The full copy PDF of English version of QB/T 2902-2007 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of QB/T 2902-2007_English with my colleagues?Answer: Yes. The purchased PDF of QB/T 2902-2007_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- QB/T 2902-2007 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of QB/T 2902-2007?A step-by-step guide to download PDF of QB/T 2902-2007_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "QB/T 2902-2007".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|