HOME   Cart(12)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

LY/T 1348-2015 English PDF

US$154.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
LY/T 1348-2015: Forestry machinery. Portable chain-saws. Minimum handle clearance and sizes
Status: Valid

LY/T 1348: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
LY/T 1348-2015English154 Add to Cart 3 days [Need to translate] Forestry machinery. Portable chain-saws. Minimum handle clearance and sizes Valid LY/T 1348-2015
LY/T 1348-2007English279 Add to Cart 3 days [Need to translate] Forestry machinery. Portable chain-saws. Minimum handle clearance and sizes Obsolete LY/T 1348-2007
LY/T 1348-1999English279 Add to Cart 3 days [Need to translate] Forestry machinery. Portable chain-saws. Minimum handle clearance and sizes Obsolete LY/T 1348-1999

PDF similar to LY/T 1348-2015


Standard similar to LY/T 1348-2015

LY/T 3022   LY/T 1346   SL 470   LY/T 3237   LY/T 2889   LY/T 1187   

Basic data

Standard ID LY/T 1348-2015 (LY/T1348-2015)
Description (Translated English) Forestry machinery. Portable chain-saws. Minimum handle clearance and sizes
Sector / Industry Forestry Industry Standard (Recommended)
Classification of Chinese Standard B96
Classification of International Standard 65.060.80
Word Count Estimation 8,857
Date of Issue 2015-10-19
Date of Implementation 2016-01-01
Older Standard (superseded by this standard) LY/T 1348-2007
Quoted Standard LY/T 1167-2014
Adopted Standard ISO 7914-2002, IDT
Regulation (derived from) National Forestry Anministration Announcement ��2015 No.19��
Issuing agency(ies) State Forestry Administration
Summary This standard specifies the internal combustion engine driven portable hand-held oil according to the minimum gap before and after the handle and the corresponding size. This standard applies to portable hand-held chain saw.

LY/T 1348-2015: Forestry machinery. Portable chain-saws. Minimum handle clearance and sizes

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Forestry machinery.Portable chain-saws.Minimum handle clearance and sizes ICS 65.060.80 B96 People's Republic of China forestry industry standards Replacing LY/T 1348-2007 Forestry machinery portable chain saw Handle the smallest gap and size (ISO 7914..2002, IDT) Posted on.2015-10-19 2016-01-01 implementation State Forestry Administration released

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces LY/T 1348-2007 "forestry machinery portable chain saw hand minimum clearance and size," and LY/T 1348- 2007 compared to the main technical changes are as follows. --- Modify the requirements of 3.1 before the hand, paragraph 2 and paragraph 3 read "The holding area should be determined as follows. Hold The length of the area shall be limited by the grip of the chain saw or the point X0 and point X1 as shown in Figure 2. Reference point X0 should follow LY/T 1167-2014 provisions to determine. Reference point X1 shown in Figure 2, the application of type A gauge (see LY/T 1167- 2014). Place the gauge in the lower left hand of the front handle and keep it parallel to the center line of the front handle, Move until it touches the cover. (See 3.1,.2007 edition 3.1); --- Revised Table 1, "the front handle grip area of the fingers gap pruning saw chain diagram number" and footnote b (see Table 1, 2007 Edition Table 1); --- Modify the name of Figure 1 (see Figure 1,.2007 version of Figure 1); --- Modify the expression of Figure 2 (see Figure 2,.2007 version of Figure 2). This standard uses the translation method identical with the international standard ISO 7914..2002 "forestry machinery portable chain saw hand the smallest gap and Size ", while incorporating ISO 7914..2002/Amd.1..2012. This standard made the following editorial changes. --- In order to be consistent with China's drawing standards, the dimensions of Figure 6 were modified way (see Figure 6,.2007 version of Figure 6). Please note that some of this document may be patentable. The issuing agencies of this document do not bear the responsibility of identifying these patents. This standard by the National Forestry Machinery Standardization Technical Committee (SAC/TC61) and centralized. This standard is drafted by. Zhejiang Yusen Brigade Tools Co., Ltd. Participated in the drafting of this standard. Zhejiang Zhongjian Technology Co., Ltd., Zhejiang Zhongma Garden Machinery Co., Ltd., Zhejiang send Neil Electrical Co., Ltd., Zhejiang Sanfeng Industrial Co., Ltd., the State Forestry Administration Harbin Forestry Machinery Research Institute. The main drafters of this standard. Dunn Chang, Yang Haiyue, Lai Youzheng, Zhu Daoqing, Yang Feng, Huang Xin Yue, Yang Xuefeng. This standard replaces the standards previously issued as follows. --- LY/T 1348-1999, LY/T 1348-2007. Forestry machinery portable chain saw Handle the smallest gap and size

1 Scope

This standard specifies the internal combustion engine-powered portable hand-held chain saw before and after the smallest gap and the corresponding size. This standard applies to portable handheld chain saw.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. LY/T 1167-2014 forestry machinery portable chain saw front hand guard Dimensions and clearance (ISO 6533..2012, IDT)

3 General requirements

3.1 before the hand The structure and the position of the front handle should ensure that when the operator wears the glove to operate the chain saw, it will not hinder the operation in the whole holding area, as shown in FIG. 1. The holding area shall be determined as follows. The length of the holding area shall be limited by the holding force of the chain saw or point X0 and point X1. Reference point X0 shall be determined according to the provisions of LY/T 1167-2014. Reference point X1, as shown in Figure 2, is to be determined using a type A gauge (see LY/T 1167-2014). The gauge placed in the left hand lower front, While keeping parallel to the centerline of the front handle, close to the handle and move it down until it contacts the cover. When the machine handle and cover can not be inserted between the A-type gauge, the gauge should be truncated, but must meet the requirements.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of LY/T 1348-2015_English be delivered?

Answer: Upon your order, we will start to translate LY/T 1348-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of LY/T 1348-2015_English with my colleagues?

Answer: Yes. The purchased PDF of LY/T 1348-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version LY/T 1348-2015?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version LY/T 1348-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.