HOME   Cart(1)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

JT/T 711-2025 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JT/T 711-2025: (Fuel consumption limits and measurement methods for commercial passenger vehicles)
Status: Valid

JT/T 711: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JT/T 711-2025English279 Add to Cart 3 days [Need to translate] (Fuel consumption limits and measurement methods for commercial passenger vehicles) Valid JT/T 711-2025
JT/T 711-2016English145 Add to Cart 0--9 seconds. Auto-delivery Limits and measurement methods of fuel consumption for commercial vehicle for passenger transportation Valid JT/T 711-2016
JT 711-2008English359 Add to Cart 3 days [Need to translate] Limits and measurement methods of fuel consumption for commercial vehicle for passenger transportation Obsolete JT 711-2008

Basic data

Standard ID JT/T 711-2025 (JT/T711-2025)
Description (Translated English) (Fuel consumption limits and measurement methods for commercial passenger vehicles)
Sector / Industry Highway & Transportation Industry Standard (Recommended)
Word Count Estimation 12,154
Date of Issue 2025-03-18
Date of Implementation 2025-10-01
Issuing agency(ies) Ministry of Transport
Summary This standard specifies the fuel consumption limit and measurement method of operating buses. This standard applies to the evaluation of fuel consumption of operating buses with diesel or gasoline as the only fuel and a maximum total mass of more than 3500kg.
JT/T 711-2016 Limits and measurement methods of fuel consumption for commercial vehicle for passenger transportation JT/T 711-2016 JT TRANSPORTATION INDUSTRY STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 03.220.20 R 06 Registration number. Replacing JT 711-2008 Limits and measurement methods of fuel consumption for commercial vehicle for passenger transportation Issued on. December 30, 2016 Implemented on. April 01, 2017 Issued by. Ministry of Transport of the People’s Republic of China

Table of Contents

Foreword ...3  1 Scope ...6  2 Normative references ...6  3 Terms and definitions ...6  4 Limit of fuel consumption ...7  5 Measurement methods ...7  Appendix A (Normative) Verification items of vehicle ...15 

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces JT 711-2008 “Limits and measurement methods of fuel consumption for commercial vehicle for passenger transportation”. As compared with JT 711-2008, in addition to editorial changes, the main changes of this standard are as follows. - ADJUST the structure of the entire text; - MODIFY the textual description of the applicable fuel in the “Scope”; CLARIFY that the fuel is a single fuel (see clause 1; clause 1 of the 2008 version); - MODIFY the guide language of the “Normative references”; ADD some standard reference entries; MODIFY the standard name of GB 1589 (see clause 2; clause 2 of the 2008 version); - DELETE terms and definitions of no-load and full-load (clause 3.1 and 3.2 of the 2008 version); - MODIFY the expression of the name of commercial diesel vehicle for passenger transportation in the “limit of fuel consumption”; ADJUST the limit of fuel consumption of commercial vehicle for passenger transportation; SPECIFY the date of implementation (see clause 4; clause 5 of the 2008 version); - ADJUST the contents of “Verification of vehicle”, moving the verification of size and mass parameters into a newly-added clause, making partial modification of the original standard (see clauses 5.1.1, 5.1.2; clause 4.1 of the 2008 version); - MODIFY the contents that “the vehicle’s tire pressure, fuel, lubricant (grease), brake fluid, brake air-pressure, engine coolant, etc.shall comply with the provisions of GB/T 12534 and vehicle manufacturers”; ADD such information as the brake air-pressure and engine coolant (see clause 5.2.3; clause 4.2.3 of the 2008 version); - MODIFY the tire’s selection principle (see clause 5.2.4; clause 4.2.4 of the 2008 version); - ADD the requirements for the maximum allowable error/accuracy grade for “engine tachometer” and “weighing instrument” (see clause 5.2.5; clause 4.2.5 of the 2008 version); - ADD the calculation method for fuel consumption in accelerated-driving conditions (see clause 5.5.2); - ADD the calculation method for fuel consumption in idle conditions (see clause 5.5.3); - MODIFY the calculation method for comprehensive fuel consumption (see clause 5.5.4; clause 4.5 of the 2008 version); - ADD the evaluation indicators and calculation methods for “comprehensive fuel consumption per unit passenger turnover” (see clause 5.5.5); - ADD and DELETE some verification items in Appendix A (Table A.1; Table A.1 of the 2008 version). This standard was proposed by the Department of Transportation Services of the Ministry of Transport. This standard shall be under the jurisdiction of the National Road Transport Standardization Technical Committee (SAC/TC 521). Main drafting organizations of this standard. Highway Science Research Institute of the Ministry of Transport, Shandong Provincial Transportation Department Road Transportation Administration, China Heavy Duty Truck Group Co., Ltd., Xiamen Jinlong United Automobile Industry Co., Ltd., Nanjing Iveco Automobile Co., Ltd., Beiqi Foton Motor Co., Ltd., Jiangling Motors Co., Ltd., Anhui Jianghuai Automobile Co., Ltd., Anhui Hefei Automobile Passenger Transport Co., Ltd., National Automobile Quality Supervision and Inspection Center (Xiangyang), National Bus Quality Supervision and Inspection Center, Changchun Automobile Testing Center, Hainan Tropical Vehicle Test Co., Ltd., National Automobile Quality Supervision and Inspection Center (Beijing Tongzhou). The main drafters of this standard. He Yong, Han Libo, Liu Li, Li Huimin, Cai Fengtian, Liu Wei, Zhang Hongwei, Song Shangbin, Wang Wei, Zhang Xueli, Li Hao, Bai Shaobo, Pu Songai, Jin Jie, Song Zhenye , Su Jiang, Chen Weiqiang, Su Jiazhu, Liu Fengyu, Fu Cheng, Liu Minghua, Zeng Sanhua, Yang Junhua, Liu Tianming, Chen Xunxiao, Wang Wei. Limits and measurement methods of fuel consumption for commercial vehicle for passenger transportation

Scope

This standard specifies the limits and measurement methods of fuel consumption for commercial vehicle for passenger transportation. This standard applies to commercial vehicle for passenger transportation that uses diesel or gasoline as a single fuel and has a maximum total mass of more than 3500 kg.

Normative References

The following documents are essential to the application of this document.For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this standard. GB 1589 Limits of dimensions, axle load and masses for motor vehicles, trailers and combination vehicles GB/T 3730.1 Motor vehicles and trailers - Types - Terms and definitions GB/T 3730.2 Road vehicle - Masses - Vocabulary and codes GB/T 3730.3 Motor vehicles and towed vehicles - Dimensions of vehicles - Terms and definitions GB/T 12534 Motor vehicles - General rules of road test method GB/T 12545.2 Commercial vehicle - Fuel consumption test method JT/T 325 Type dividing and class rating for commercial motor-vehicles of passenger transport

Terms and Definitions

The terms and definitions as defined in GB/T 3730.1, GB/T 3730.2, GB/T 5.2.2 The meteorological conditions and preparation of test vehicle during the test shall comply with the provisions of GB/T 12534. 5.2.3 Vehicle’s tire pressure, fuel, lubricant (grease), brake fluid, brake air- pressure, engine coolant, etc.shall comply with the provisions of GB/T 12534 and vehicle manufacturers. 5.2.4 Test vehicle’s tires are selected in order according to the following principles. a) When the vehicle may be equipped with bias tires and radial tires, it shall select the bias tires; b) When the vehicle may be equipped with tires of different outer diameters, it shall select the tires of small outer diameters; c) When the vehicle may be equipped with tires of different cross-sectional widths under the same outer diameter of the tire, it shall select the tires with a large cross-sectional width. 5.2.5 The main test instruments and the requirements for the maximum allowable error/accuracy grades are as follows. a) Measuring instrument of vehicle’s speed. the maximum allowable error is ±0.5%; b) Fuel flow meter. the maximum allowable error is ±0.5%; c) Timer. the minimum division value is 0.1 s; d) Engine tachometer. the maximum allowable error is ±1%; e) Weighing instrument. the accuracy grade is grade-3 and above. 5.2.6 During the test, it shall close the vehicle’s windows, cab’s vent and air- conditioners.It only allows for the equipment necessary to drive the vehicle to run. 5.3 Test methods 5.3.1 Constant-speed driving conditions 5.3.1.1 The vehicle is fully-loaded.The vehicle of manual transmission shall be in the highest gear or the second-highest gear.When the highest gear cannot meet the requirements for test speed, use the second-highest gear.The vehicle of the automatic transmission shall be in the gear-D.At each test speed, let the vehicle drive stably for at least 100 m to pass a 500 m test road at constant- speed, to measure the time and fuel consumption of the vehicle when passing measurement results. 5.3.2.3 The difference between the starting speed & final speed and the specified speed during the test shall be within the range of -2 km/h ~ 0 km/h and 0 km/h ~ 2 km/h, respectively. 5.3.2.4 For the acceleration test, it shall make two measurements (round-trip) along the test road. 5.3.2.5 The test results shall be subjected to repeatability verification in accordance with the provisions of GB/T 12545.2. 5.3.3 Idle condition 5.3.3.1 The measurement of the fuel consumption at idle conditions shall be carried out immediately after the end of the test at constant-speed condition and the accelerated condition. 5.3.3.2 When measuring, the vehicle shall be stationary, the clutch is in the engaged position, the manual transmission is in the neutral position, the vehicle of automatic transmission shall be in the “parking” or “P” position.The accelerator pedal is in the fully-released position, the engine’s speed shall be kept at the idle speed as specified by the vehicle manufacturer, with a speed variation of ±50 r/min. 5.3.3.3 The measurement of fuel consumption at idle speed shall be started 300 s after idling, made for 3 times, 300 s per measurement.Record the fuel consumption at idle speed and the engine speed, take the average of the 3 measurement results. 5.4 Correction of fuel consumption 5.4.1 Correction of fuel consumption in constant-speed conditions Take the arithmetic mean value of the measurement results of fuel consumption which are made at the same test speed according to the test method of 5.3.1 as the measured value of the constant-speed fuel consumption of the vehicle at this speed, make correction of standard status according to the method as specified in GB/T 12545.2. 5.4.2 Correction of fuel consumption in accelerated conditions Take the arithmetic mean value of the measurement results of fuel consumption under accelerated conditions which are made according to the test method of 5.3.2 as the measured value of the accelerated-speed fuel consumption, make correction of standard status according to the method as specified in GB/T 12545.2.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JT/T 711-2025_English be delivered?

Answer: Upon your order, we will start to translate JT/T 711-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JT/T 711-2025_English with my colleagues?

Answer: Yes. The purchased PDF of JT/T 711-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JT/T 711-2025?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JT/T 711-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.