HOME   Cart(1)   Quotation   About-Us Tax PDFs Standard-List
Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 189760 (2 Mar 2024)

JJF 1093-2015 (JJF1093-2015)

Chinese standards (related to): 'JJF 1093-2015'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)See DetailStatusGoogle Book
JJF 1093-2015English459 Add to Cart 4 days Calibration Specification for Projectors JJF 1093-2015 Valid JJF 1093-2015
JJF 1093-2002English679 Add to Cart 3 days Calibration Specification for Projectors JJF 1093-2002 Obsolete JJF 1093-2002


   
BASIC DATA
Standard ID JJF 1093-2015 (JJF1093-2015)
Description (Translated English) Calibration Specification for Projectors
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard N45;A60
Word Count Estimation 20,230
Date of Issue 2015-12-07
Date of Implementation 2016-06-07
Older Standard (superseded by this standard) JJF 1093-2002
Quoted Standard JB/T 6380
Drafting Organization Ministry of Industry and Information Technology Institute of Electronics V; Shaanxi Provincial Institute of Metrology
Administrative Organization National Technical Committee for Geometrical Engineering Parameter Measurement
Regulation (derived from) ?AQSIQ 2015 Nian (No.148)
Issuing agency(ies) State Administration of Quality Supervision, Inspection and Quarantine
Summary This standard applies to measuring vertical and horizontal alignment of the projector.


JJF 1093-2015: PDF in English
JJF 1093-2015
Calibration Specification for Projectors
National Metrological Technical Code of the People's Republic of China
Projector calibration specification
2015-12-07 released
2016-06-07 implementation
State Administration of Quality Supervision, Inspection and Quarantine issued
Projector calibration specification
Replacing JJF 1093-2002
Coordinate Unit. National Geometric Engineering Parameter Measurement Technical Committee
The main drafting unit. Shaanxi Institute of Metrology
Ministry of Industry and Information Technology, the fifth Institute of Electronics
The specification commissioned by the National Geometric Engineering Engineering Metrology Technical Committee is responsible for the interpretation
The drafters of this specification.
Evergreen (Shaanxi Institute of Metrology)
Zhang hui (Shaanxi Institute of Metrology)
Zhang xiaofen (Institute of Electronics and Electronics, Ministry of Industry and Information Technology)
table of Contents
Introduction (II)
1 range (1)
2 References (1)
3 Overview (1)
4 Metering characteristics (1)
4.1 Table table vertical, horizontal (vertical) to move the straightness (1)
4.2 vertical and horizontal (vertical) vertical movement of the vertical (1)
4.3 Optical mechanical readings device 0.1mm marks and micron marks coincidence (2)
4.4 Optical mechanical readings of the objective lens magnification error (2)
4.5 Change of indication error range and return error of reading device (2)
4.6 Drift of digital display (2)
4.7 Projector objective magnification error (2)
4.8 Instrument indication error range (2)
4.9 change screen (or rotary table) of the indication error range (3)
5 Calibration conditions (3)
5.1 Environmental conditions (3)
5.2 Calibration and calibration standards (3)
6 Calibration method (4)
6.1 Straightness of the table longitudinal, horizontal (vertical) to move (4)
6.2 vertical and horizontal cross-vertical movement of the table (4)
6.3 Optical mechanical readings device 0.1mm marks and micron marks coincide (4)
6.4 Optical mechanical readings of the objective lens magnification error (4)
6.5 Change of indication error range and return error of reading device (4)
6.6 Drift of Digital Display (5)
6.7 Projector objective magnification error (5)
6.8 Instrument indication error range (6)
6.9 Change range of indication error of rotary screen (or rotary table) (7)
7 Processing of calibration results (7)
8 re-school time interval (7)
Appendix A Uncertainty Evaluation of Measurement Result of Change Range of Projector Error Range (8)
Appendix B Evaluation of Uncertainty in Measurement of Magnification of Objective Lens (11)
Appendix C Calibration Certificate Information and Inside Page Format (13)
introduction
The revision of this specification is based on JJF 1071-2010 "Rules for the preparation of national metrological calibration specifications", JJF 1001-2011
"General Measurement Terms and Definitions" and JJF 1059.1-2012 "Measurement Uncertainty Assessment and Representation"
According to JJF 1093-2002 "projector calibration specification" to be revised. And JJF 1093-2002 "projector calibration
Specification "compared to the editorial changes in the main technical changes are as follows.
- an illustration of the digital display device is added to the structure of the projector (see 3);
--- canceled in accordance with the size of the table on the simple, light, heavy classification, unified in accordance with the shadow screen
Inch is divided into small, medium and large (see 3);
Calibration method for indication error of optical mechanical reading device Selection of standard glass thread ruler as standard, alternative
The original standard block simplifies the calibration method (see 5.2 and 6.5.1);
--- to cancel the original specification "screen cross-line horizontal line on the longitudinal direction of the parallel movement of the guide" calibration
project;
--- to cancel the original specification "projection objective lens optical axis and projection lighting axis and the work surface perpendicularity" calibration
project;
--- to cancel the original standard "top correctness" calibration project;
--- Rotary screen (or rotary table) indication error measurement characteristics required to be reduced to an indicator;
--- simplifies the specific requirements for calibration locations in the objective lens magnification calibration method (see 6.7);
--- simplifies the indication of the calibration point distribution of the instrument's indication error, and calibrates the indication error of the digital display
(See 6.8).
The previous versions of this specification are released.
--- JJF 1093-2002;
--- JJG108-1982.
Projector calibration specification
1 Scope
This specification applies to the calibration of vertical and horizontal projectors for measurement purposes.
2 reference file
This specification refers to the following documents.
JB/T 6380 Projector
For dated references, only the dated edition applies to this specification; references that are not dated
, The latest version (including all amendments) applies to this specification.
3 Overview
Projector is light, machine, electric integration of measuring instruments, the use of optical amplification principle, the measured object through the optical
After the system is enlarged, the imaging is observed on the screen. The optical principle is shown in Fig. The light beam from the light source 1 passes through
The condenser group 2 is turned into a parallel light to illuminate the object 3 to be projected onto the screen 6 through the objective lens group 4,
Perform contour measurements or coordinate measurements on the workpiece. Its main structure type is divided into vertical projector (objective lens optical axis perpendicular to the work
For the table, the structure type shown in Figure 2) and horizontal projector (objective lens parallel to the work surface, the structure type shown in Figure 3)
Two kinds.
Figure 1 Schematic diagram of the projector optical principle
1-light source; 2-condenser group; 3-test object; 4-objective group; 5-sample image;
Projectors generally according to the screen diameter D size is divided into small (D ≤ 400mm), medium (400mm D
800mm) and large (D ≥ 800mm) three categories.
4 measurement characteristics
4.1 Table vertical, horizontal (vertical) to move the straightness
The straightness error of the vertical and horizontal movement of the table is limited to 10μm.
4.2 Table vertical, horizontal (vertical) to move the mutual perpendicularity
......