|
US$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JB/T 20134-2020: Pharmaceutical hopper lifter
Status: Valid JB/T 20134: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| JB/T 20134-2020 | English | 299 |
Add to Cart
|
3 days [Need to translate]
|
Pharmaceutical hopper lifter
| Valid |
JB/T 20134-2020
|
| JB/T 20134-2010 | English | 519 |
Add to Cart
|
3 days [Need to translate]
|
Pharma popper lifter
| Obsolete |
JB/T 20134-2010
|
PDF similar to JB/T 20134-2020
Basic data | Standard ID | JB/T 20134-2020 (JB/T20134-2020) | | Description (Translated English) | Pharmaceutical hopper lifter | | Sector / Industry | Mechanical & Machinery Industry Standard (Recommended) | | Classification of Chinese Standard | C92 | | Classification of International Standard | 11.120.30 | | Word Count Estimation | 13,142 | | Date of Issue | 2020-08-31 | | Date of Implementation | 2021-01-01 | | Older Standard (superseded by this standard) | JB/T 20134-2010 | | Regulation (derived from) | Ministry of Industry and Information Technology Announcement No. 37 (2020) | | Issuing agency(ies) | Ministry of Industry and Information Technology | JB/T 20134-2020: Pharmaceutical hopper lifter---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Medical hopper elevator)
ICS 11.120.30
C92
Record number. 81292-2021
People's Republic of China Machinery Industry Standard
Replace JB/T 20134-2010
Medical hopper elevator
2020-08-31 released
2021-01-01 implementation
Issued by the Ministry of Industry and Information Technology of the People's Republic of China
Table of contents
Foreword Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Mark 2
5 Requirements 2
6 Test method 4
7 Inspection rules 5
8 Marks, instructions for use, packaging, transportation and storage 6
Appendix A (Normative Appendix) Structural Stability Test 8
Appendix B (Normative Appendix) Running smoothness test 10
Foreword
This standard is to revise JB/T 20134-2010 in accordance with the rules given in GB/T 1.1-2009.
This standard replaces JB/T 20134-2010.Compared with JB/T 20134-2010, the main technical changes of this standard are as follows.
---Amendment scope (see Chapter 1, Chapter 1 of the.2010 edition);
---Modify the normative reference documents (see Chapter 2, Chapter 2 of the.2010 edition);
--- Modify terms and definitions (see Chapter 3, Chapter 3 of the.2010 edition);
---Modify the model to mark (see Chapter 4, Chapter 4 of the.2010 edition);
--- Modify the appearance to the surface quality (see 5.2, 5.2 of the.2010 edition);
--- Modify the logo and move into the surface quality (see 5.2.2, 5.5 in the.2010 edition);
--- Modify the overturning resistance to static stability (see 5.3.1, 5.4.1 in the.2010 edition);
---Modify the elastic deformation to structural stability (see 5.3.2, 5.4.2 of the.2010 edition);
--- Modify the long-term load-bearing vertical displacement to natural settlement (see 5.3.3, 5.4.6 of the.2010 edition)
---Modify the running stability (see 5.3.4, 5.4.3 of the.2010 edition);
---Modify the hydraulic system without leakage to pressure and seal (see 5.3.5.2, 5.4.4 of the.2010 edition);
---Modify the electrical system for electrical safety (see 5.4, 5.3 of the.2010 edition);
---Modify the test method (see Chapter 6, Chapter 6 of the.2010 edition);
---Modify the factory inspection (see 7.2, 7.2 of the.2010 edition);
--- Amend the logo, instruction manual and packaging, transportation, storage terms and merge (see Chapter 8,.2010 Edition 8, 9);
---Modify the elastic recovery test to a normative appendix structural stability test (see Appendix A, Appendix A of the.2010 edition);
--- Increase the hydraulic system pipeline identification requirements and test methods (see 5.3.5.1, 6.3.5.1);
--- Increase the maximum descent speed of the hopper (applicable to hydraulic lifting) requirements and test methods (see 5.3.5.4, 6.3.5.4);
---Increase the requirements and test methods for anti-falling devices (see 5.3.6, 6.3.6);
--- Increase the requirements and test methods of rotation limit devices (see 5.3.7, 6.3.7);
--- Increase the interchangeability requirements and test methods with the hopper (see 5.3.9, 6.3.9);
--- Add a normative appendix to run smoothness test (see appendix B).
This standard was proposed by the China Pharmaceutical Equipment Industry Association.
This standard is under the jurisdiction of the National Pharmaceutical Equipment Standardization Technical Committee (SAC/TC356).
This standard was drafted. Zhejiang Canaan Technology Co., Ltd., Shandong Xinma Pharmaceutical Equipment Co., Ltd.
The main drafters of this standard. Fang Zheng, Xie Zhongze, Wu Wutong, Wang Hongmin, Zhou Zhendao, Gu Shi, Huang Yuanyuan, Yu Jun.
The previous versions of the standard replaced by this standard are as follows.
---JB/T 20134-2010.
Medical hopper elevator
1 Scope
This standard specifies the terms and definitions, markings, requirements, test methods, inspection rules, signs, instructions for use, and
Packaging, transportation and storage.
This standard applies to medicinal hopper elevators (hereinafter referred to as elevators) with a lifting mass less than 3000kg.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 191 Packaging, storage and transportation pictorial signs
GB/T 1184 shape and position tolerance without tolerance value
GB/T 1804 General Tolerance Tolerance of linear and angular dimensions without tolerance
GB 2894 Safety signs and guidelines for their use
GB/T 3768-2017 Acoustic sound pressure method is used to determine the noise source power and sound energy level using the simple envelope measurement surface above the reflecting surface.
Easy method
GB/T 6388 Transport packaging receiving and dispatching signs
GB/T 9969 General Rules for the Use of Industrial Products
The generation of GB/T 10111 random number and its application in product quality sampling inspection
GB/T 13306 signs
GB/T 13384 General technical conditions for packaging of mechanical and electrical products
GB/T 19142 General Rules for Export Commodity Packaging
GB/T 36035 General requirements for electrical safety of pharmaceutical machinery
MT/T 776-2004 Coal Mine Machinery Hydraulic System Assembly Factory Inspection Specification
JB/T 20086 Medical container hopper
JB/T 20188 Pharmaceutical machinery product model compilation method
3 Terms and definitions
The following terms and definitions apply to this standard.
3.1
Forkframe
The fork-shaped piece that is assembled on the lifting slide assembly to carry the hopper.
3.2
Flexiblesupportingparts
Flexible rigging directly used to carry heavy objects such as materials, hoppers, forks, lifting slide components, etc.
3.3
Heightlocater
A device that can adjust the height on the elevator column and lock the lowest drop position.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of JB/T 20134-2020_English be delivered?Answer: Upon your order, we will start to translate JB/T 20134-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of JB/T 20134-2020_English with my colleagues?Answer: Yes. The purchased PDF of JB/T 20134-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version JB/T 20134-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JB/T 20134-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|