|
US$1239.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email.
GBZ25458-2010: Rules and procedures for conformity testing and certification of wind turbine generator system
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/Z 25458-2010 | English | 1239 |
Add to Cart
|
8 days [Need to translate]
|
Rules and procedures for conformity testing and certification of wind turbine generator system
| Valid |
GB/Z 25458-2010
|
PDF similar to GBZ25458-2010
Basic data | Standard ID | GB/Z 25458-2010 (GB/Z25458-2010) | | Description (Translated English) | Rules and procedures for conformity testing and certification of wind turbine generator system | | Sector / Industry | National Standard | | Classification of Chinese Standard | F11 | | Classification of International Standard | 27.180 | | Word Count Estimation | 56,517 | | Date of Issue | 2010-11-10 | | Date of Implementation | 2011-01-01 | | Quoted Standard | GB 1094.1-1996; GB/T 2900.53; GB/T 14481-2008; GB 17646; GB/T 18346; GB 18451.1; GB/T 18451.2; GB/T 19000; GB/T 19001; GB/T 19073; GB/T 20319; GB/T 20320; GB/T 22516; GB/T 25383; GB/T 25384; GB/Z 25426; GB/T 27025; GB/T 27065; IEC 60034; IEC 61400-3 | | Adopted Standard | IEC WT 01-2001, NEQ | | Regulation (derived from) | ?National Standard Approval Announcement 2010 No.8 (Total No.163) | | Issuing agency(ies) | Ministry of Health of the People's Republic of China | | Summary | This standard specifies the wind turbine certification rules and procedural requirements. Procedures and management of the implementation of the principles of wind turbine conformity assessment carried out in detail. The conformity assessment in accordance with relevant standards and relevant technical requirements. Reliability, , performance, the safety of wind turbines and grid-side test compatibility and other aspects of certification. The technical guidance document applies to any type and size of wind turbines. | GBZ25458-2010: Rules and procedures for conformity testing and certification of wind turbine generator system
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rules and procedures for conformity testing and certification of wind turbine generator system
ICS 27.180
F11
People's Republic of China national standardization of technical guidance documents
Wind turbine certification
Rules and procedures
[IEC WT01.2001, IEC SystemforConformityTestingand
CertificationofWindTurbinesRulesandprocedures, NEQ]
2010-11-10 released
2011-01-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Directory
Foreword Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
4 symbols and abbreviations 3
4.1 symbol 3
4.2 Abbreviations
5 Recognition of implementing agencies 4
5.1 General 4
5.2 Recognition 4
5.3 Mutual recognition agreement 4
6 certification system management 4
6.1 General 4
6.2 Certification Agreement 4
6.3 Issuance of Certificate and Certificate of Compliance 4
6.4 Preservation of related documents 4
6.5 certificate to maintain and validity 5
6.6 Corrective Action 5
7 certification content 5
7.1 General 5
7.2 Design Certification 5
7.3 type certification 6
7.4 Project Certification 6
7.5 Component Certification 7
8 design certification 8
8.1 General 8
8.2 Design Basis Assessment 8
8.3 Design Assessment 9
9 type certification 15
9.1 General 15
9.2 Type test 15
9.3 Taki Design Assessment 17
9.4 Performance Tests 17
9.5 Final Evaluation 18
9.6 Type Certification 18
Project Certification 19
10.1 General 19
10.2 Site Assessment 19
10.3 Design Basis Assessment 20
10.4 Overall Load Analysis 21
10.5 Design Assessment of Wind Turbine/Tower Heads for Specific Sites 21
Design Assessment of Site - Specific Support Structure
10.7 Design Assessment of Other Installation Facilities 22
10.8 Wind Turbine/Tower Supervision and Inspection 23
10.9 Support Structure Manufacturing Supervision and Inspection 23
10.10 Other Installation Facilities Manufacturing Supervision and Inspection 24
Project Performance Tests
10.12 Transport and installation supervision and inspection 26
10.13 Commissioning Supervision and Inspection 26
10.14 Final Assessment 27
10.15 Project Certification 27
10.16 Operation and Maintenance Supervision and Inspection 27
Appendix A (informative) design documents list 28
Appendix B (informative) sample/format 35
B.1 Design Certification Sample 35
B.2 Type Approval Certificate Sample 37
B.3 Design Evaluation Certificate of Compliance 38
B.4 Type Test Compliance Sample 39
B.5 Evaluation of Manufacturing Capability Compliance Sample 40
B.6 Taki Design Assessment Compliance Means 41
B.7 Performance Test Compliance Format 42
B.8 Project Certification Sample 43
B.9 Site Assessment Compliance Sample 44
B.10 Foundation Design Compliance Certification Form 45
B.11 Installation of proof of conformity 46
B.12 Operation and Maintenance Supervision Compliance Sample 47
B.13 Parts Certification Certificate Sample 48
Appendix C (Normative) Minimum requirements for load testing 49
Appendix D (Normative) Safety and functional test requirements 50
Appendix E (Normative) Durability of small wind turbine test 51
Foreword
This guideline uses the redrafted law to refer to IEC WT01.2001 "Wind Turbine Qualification Test and Certification System"
(English version) preparation. Consistency with IEC WT01.2001 is not equivalent.
The main differences between this guidance document and IEC WT01.2001 are as follows.
--- Removed "IEC Preface" and "Introduction" of IEC WT01.2001 and added the "Preface" to this guidance document;
--- Removed the contents of "1 Name", "2 Purposes", "3 Guidance Documents" and "4 Organizations" in IEC WT01.2001;
--- With the national standard supplement and replace IEC WT01.2001 involved in the IEC and ISO series of standards;
--- In the "definition" to increase the design certification and design certification concept;
--- In the "certification content" to increase the design certification content, equivalent to the design evaluation in IEC WT01.2001;
--- After "certification content" all the content, are revised with IEC WT01.2001 for approval draft IEC 61400-22.2007 (process
Draft) replaced the original IEC WT01.2001 content, and delete the "prototype certification" content.
This guidance document is proposed by China Machinery Industry Federation.
This guidance document is subject to the National Wind Machinery Standardization Technical Committee (SAC/TC50).
The drafting of the guidance of technical documents. Beijing Certification Center, China Classification Society, Xinjiang Goldwind Technology Co., Ltd., China Huaneng
Source Investment Co., Ltd., the National Wind Machinery Standardization Technical Committee Secretariat, Air China Hui Teng Wind Power Equipment Co., Ltd.
The main drafters of this technical document are Qin Haiyan, Wang Wei, Wang Xiangming, Zhuang Yuexing, Gao Hui, Wang Jianping, Tian Ye, Fang Chuang, Chen Lei Jie,
Wang Yan, Zhang Yu.
Wind turbine certification
Rules and procedures
1 Scope
This Guidance Document sets out the rules and procedures for the certification of WTGs. The procedures for implementing the conformity assessment of WTGs
The principles of sequencing and management are described in detail. Conformity assessment will be in accordance with the relevant standards and related technical requirements for wind turbine safety
Reliability, performance, testing, and compatibility with the grid.
This guidance document is applicable to any type and specification of wind turbine.
2 Normative references
The following documents contain provisions which, through reference in this Guidance Document, become the provisions of this Guidance Note document. All dated
Reference documents, all subsequent amendments (not including errata content), or revisions do not apply to this guidance document, however, drums
Recipients of the agreement based on this guidance document are encouraged to study whether the latest versions of these documents are applicable. All undated references
The latest version of this document applies to this guidance document.
GB 1094.1-1996 power transformers Part 1. General (eqvIEC 60076-1.1993)
GB/T 2900.53 Electrotechnical terminology wind turbine (GB/T 2900.53-2001, idtIEC 60050-415.1999)
Test methods for single phase synchronous motors GB/T 14481-2008
GB 17646 small wind turbine safety requirements (GB/T 17646-1998, eqvIEC 61400-2.1996)
GB/T 18346 various general requirements for the ability of inspection agencies (GB/T 18346-2001, idtIEC /ISO 17020.1998)
GB 18451.1 wind turbine safety requirements (GB 18451.1-2001, idtIEC 61400-1.1999)
GB/T 18451.2 wind turbine power characteristics test (GB/T 18451.2-2003, IEC 61400-12.1998, Wind
turbinegeneratorsystems-Part 12.Windturbinepowerperformancetesting, IDT)
GB/T 19000 Quality Management System Fundamentals and Terminology (GB/T 19000-2008, ISO 9000.2005, IDT)
GB/T 19001 quality management system requirements (GB/T 19001-2008, ISO 9001.2008, IDT)
GB/T 19073 wind turbine gearbox
GB/T 20319 wind turbine acceptance code
GB/T 20320 wind turbine power quality measurement and evaluation methods (GB/T 20320-2006, IEC 61400-21.
2001, Measurement and assessmentofpowerqualitycharacteristicsofgirdconnectedwindturbines,
IDT)
GB/T 22516 wind turbine noise measurement method (GB/T 22516-2008, IEC 61400-11.2002, Wind
turbine generator systems-Part 11. Acoustic noise measurement techniques, IDT)
GB/T 25383 wind turbine wind turbine blades
GB/T 25384 wind turbine wind turbine blade full-scale structure test (GB/T 25384-2010, IEC TS61400-23
Ed1.2001, IDT)
GB /Z 25426 wind turbine mechanical load measurement (GB /Z 25426-2010, IEC TS61400-13.2001Ed1,
MOD)
GB/T 27025 testing and calibration laboratory capacity requirements (GB/T 27025-2008, ISO /IEC 17025.2005,
IDT)
GB/T 27065 General requirements for product certification bodies (GB/T 27065-2004, ISO /IEC Guide65.1996, IDT)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GBZ25458-2010_English be delivered?Answer: Upon your order, we will start to translate GBZ25458-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GBZ25458-2010_English with my colleagues?Answer: Yes. The purchased PDF of GBZ25458-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|