|
US$184.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 8102-2020: Pneumatic fluid power - Single rod cylinders, bores from 8 mm to 25 mm - Mounting dimensions
Status: Valid GB/T 8102: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 8102-2020 | English | 184 |
Add to Cart
|
3 days [Need to translate]
|
Pneumatic fluid power - Single rod cylinders, bores from 8 mm to 25 mm - Mounting dimensions
| Valid |
GB/T 8102-2020
|
| GB/T 8102-2008 | English | 434 |
Add to Cart
|
3 days [Need to translate]
|
Single rod air cylinders, bores from 8mm to 25mm -- Mounting dimensions
| Obsolete |
GB/T 8102-2008
|
| GB/T 8102-1987 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Pneumatic fluid power--Single rod cylinders--Bores from 8 to 25mm--Mounting dimensions
| Obsolete |
GB/T 8102-1987
|
PDF similar to GB/T 8102-2020
Basic data | Standard ID | GB/T 8102-2020 (GB/T8102-2020) | | Description (Translated English) | Pneumatic fluid power - Single rod cylinders, bores from 8 mm to 25 mm - Mounting dimensions | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J20 | | Classification of International Standard | 23.100.20 | | Word Count Estimation | 10,137 | | Date of Issue | 2020-11-19 | | Date of Implementation | 2021-06-01 | | Older Standard (superseded by this standard) | GB/T 8102-2008 | | Regulation (derived from) | National Standard Announcement No. 26 of 2020 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 8102-2020: Pneumatic fluid power - Single rod cylinders, bores from 8 mm to 25 mm - Mounting dimensions
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Pneumatic fluid power-Single rod cylinders, bores from 8 mm to 25 mm-Mounting dimensions
ICS 23.100.20
J20
National Standards of People's Republic of China
Replace GB/T 8102-2008
Pneumatic single rod cylinder with 8mm to 25mm bore
Installation size
2020-11-19 released
2021-06-01 implementation
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅰ
Introduction Ⅱ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 size 1
5 Itinerary 2
6 Bore 2
7 Installation type 2
8 Piston rod 2
9 Marking description 2
Reference 6
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 8102-2008 "Installation Dimensions of Single Rod Cylinders with Cylinder Inner Diameter 8mm~25mm", and is compatible with GB/T 8102-2008
Compared with.2008, the main technical changes are as follows.
---Modified the content of "Normative Reference Documents" (see Chapter 2);
---Modified the "size" content (see Chapter 4);
--- Deleted "ϕD1" (see Figure 2 and Table 2);
---Added a description in the table (see Table 3);
---Modified "Figure 4" (see Figure 4);
---Modified "Figure 5 and Table 5" (see Figure 5 and Table 5).
The translation method used in this standard is equivalent to ISO 6432.2015 "Pneumatic single rod cylinder, 1000kPa (10bar) series, cylinder diameter 8mm~
25mm basic size and installation size".
The Chinese documents that have a consistent correspondence with the international documents cited in this standard are as follows.
---GB/T 2348-2018 fluid transmission system and component bore and piston rod diameter (ISO 3320.2013, MOD)
---GB/T 2349-1980 hydraulic pneumatic system and component cylinder piston stroke series (eqvISO 4393.1978)
---GB/T 2350-2020 Fluid transmission system and component piston rod thread type and size series (ISO 4395.2009,
MOD)
---GB/T 9094-2020 Fluid transmission system and component cylinder installation size and installation type code (ISO 6099.2018,
IDT)
---GB/T 14038-2008 pneumatic connection port and stud end (ISO 16030.2001/Amd.1.2005, IDT)
---GB/T 17446-2012 Fluid Power System and Components Vocabulary (ISO 5598.2008, IDT)
This standard has made the following editorial changes.
---The standard name was changed to "Installation Dimensions of Single Rod Cylinder with Pneumatic Bore from 8mm to 25mm";
---The pressure unit "kPa" in the international standard is changed to "MPa";
---The "bar" unit in the text is deleted.
This standard was proposed by China Machinery Industry Federation.
This standard is under the jurisdiction of the National Hydraulic and Pneumatic Standardization Technical Committee (SAC/TC3).
Drafting organizations of this standard. Yueqing Hengyi Pneumatic Co., Ltd., Zhejiang Yiri Pneumatic Technology Co., Ltd., National Pneumatic Product Quality Supervision
Inspection Center, Ningbo Airtec Automation Industry Co., Ltd., Ningbo Jiaerling Pneumatic Machinery Co., Ltd.
The main drafters of this standard. Zhu Lefei, Yu Jinze, Ren Cheli, Guo Lili, Fang Qinghua, Shan Junbo.
The previous versions of the standard replaced by this standard are as follows.
---GB/T 8102-1987, GB/T 8102-2008.
Introduction
In a pneumatic system, power is transmitted and controlled by compressed air in the loop.
Cylinder is an element in pneumatic system that converts gas energy into mechanical energy and realizes linear motion. It includes moving in the cylinder
Parts such as pistons and piston rods.
In order to fix the cylinder on the mechanical device, the cylinder can also be equipped with mounting accessories.
Pneumatic single rod cylinder with 8mm to 25mm bore
Installation size
1 Scope
This standard specifies the installation dimensions of a single-rod cylinder with a maximum working pressure of 1MPa and a cylinder diameter of 8mm to 25mm to meet the requirements of product interaction.
Transsexual requirements.
Note. This standard only provides basic guidelines, allowing manufacturers to design their own cylinders, and does not limit technological development.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
ISO 3320 Fluid Power System and Components Bore Diameter and Piston Rod Diameter and Area Ratio Metric Series
ISO 4393 fluid transmission system and element cylinder piston stroke basic series
ISO 4395 fluid transmission system and component cylinder piston rod end type and size
ISO 5598 Fluid Power System and Components Vocabulary
ISO 6099 fluid transmission system and component cylinder installation size and installation type code
ISO 16030 pneumatic connection port and stud end
3 Terms and definitions
The terms and definitions defined in ISO 5598 apply to this document.
4 size
4.1 Basic dimensions
The basic dimensions are shown in Figure 1 and Table 1.
4.2 Installation dimensions
The installation dimensions are shown in Figure 2~Figure 5 and the corresponding Table 2~Table 5.
Note. "" after the letter means to add a stroke.
The dimensional tolerances in the table only apply to cylinders with a stroke less than 100mm. When the stroke is greater than 100mm, the dimensional tolerance is determined by the manufacturer and
User negotiation.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 8102-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 8102-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 8102-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8102-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 8102-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8102-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|