|
US$399.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 7936-2012: Hydraulic fluid power-positive displacement pumps and motors -- Determination of derived capacity
Status: Valid GB/T 7936: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 7936-2012 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Hydraulic fluid power-positive displacement pumps and motors -- Determination of derived capacity
| Valid |
GB/T 7936-2012
|
| GB/T 7936-1987 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
Hydraulic fluid power--Positive displacement pumps and motors--Determination of derived capacity
| Obsolete |
GB/T 7936-1987
|
PDF similar to GB/T 7936-2012
Basic data | Standard ID | GB/T 7936-2012 (GB/T7936-2012) | | Description (Translated English) | Hydraulic fluid power-positive displacement pumps and motors -- Determination of derived capacity | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J20 | | Classification of International Standard | 23.100.10 | | Word Count Estimation | 17,139 | | Older Standard (superseded by this standard) | GB/T 7936-1987 | | Quoted Standard | GB/T 786.1; GB/T 3141; GB/T 7631.2; GB/T 17446; GB/T 17491 | | Adopted Standard | ISO 8426-2008, MOD | | Regulation (derived from) | National Standards Bulletin No. 41 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the conditions and requirements in the steady state continuous speed positive displacement pump and motor load displacement method. Components were tested as a pump when tested in the shaft input mechanical energy, hydraulic energy | GB/T 7936-2012: Hydraulic fluid power-positive displacement pumps and motors -- Determination of derived capacity
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS23.100.10
J20
National Standards of People's Republic of China
Replacing GB/T 7936-1987
Hydraulic pump and motor-load displacement measurement method
(ISO 8426.2008, MOD)
Issued on. 2013-10-01 2012-12-31 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
Rules of the criteria based on GB/T 1.1-2009 given draft.
This standard replaces GB/T 7936-1987 "hydraulic pumps, motors idling determination of displacement."
The standards and GB/T 7936-1987 technological change compared to the following.
--- Modify the definition of the no-load displacement;
--- Redefined "Symbols and units";
--- Redefined the steady state condition;
--- Redefined the temperature of the test medium;
--- Measured by the flow rate at different speeds to measure the flow at different pressures;
--- Redefined the load displacement calculation methods and formulas.
This standard uses redrafted law revision adopted ISO 8426.2008 "Hydraulic displacement pumps and motor-load displacement measurement."
This standard and ISO 8426.2008 and the technical differences for the following reasons.
--- On normative references, this standard has been adjusted technical differences, in order to adapt our technical conditions adjustments
Focus reflected in Chapter 2, "Normative references", the specific adjustments are as follows.
• Use identical with international standards GB/T 786.1 instead ISO 1219-1 (see Chapter 4);
• Use identical with international standards GB/T 17446 instead of ISO 5598 (see Chapter 3);
• Use equivalent to international standards of GB/T 3141 instead of ISO 3448 (see 8.1);
• Use revise international standards of GB/T 17491 instead of ISO 4409 (see 7.1.3, 8.2.1);
• Use identical with international standards GB/T 7631.2 instead ISO 6743-4 (see 8.1).
--- Table 2 and Table A.1 in line 5 is amended as.
Pressure [psig p≥0.15MPa (1.5bar)] /% ± 0.5 ± 1.5 ± 2.5
Make more reasonable and consistent with the values \u200b\u200bof the relevant standards.
This standard made the following editorial changes.
--- Standard name changed to "pump and motor-load displacement measurement method";
"When the (inlet) port of import (export) of zero pressure" is defined --- load increased displacement modifiers;
--- Increase "Note 2" in Fig. 3;
--- Increase "Note 2" in 7.1.3;
--- In the formula (B.1) in the "qi" to "q0";
--- In the formula (B.2) increase "qi --- i-th in Δpi when measured flow rate, expressed in L/min;";
--- No-load displacement unit from the "L/r" to "mL/r".
The standard proposed by China Machinery Industry Federation.
This standard by the National Standardization Technical Committee of hydraulic and pneumatic (SAC/TC3) centralized.
This standard is drafted by. Jiangsu Machinery Research and Design Institute Limited Liability Company.
Participated in the drafting of this standard. Ningbo broad day Sai Kesi Hydraulic Co., Ltd., Hai Teke Hydraulic Co., Ltd., Guizhou Liyuan Hydraulic shares have
Limited, Beijing Huade Hydraulic Industrial Group Co., Ltd., Jinan hydraulic pump limited liability company, the CSIC Chongqing Hydraulic Electric Co.
the company.
The main drafters of this standard. Yang Yongjun, Liang Yong, Ma Lijun, Luo Degang, Anthony Cheung, Hong Qing, Xu Fugang, Yeji Ying, Lv Shuping, Zhao Tiejun,
Song Yunpeng, Chen Wensheng.
This standard replaces the standards previously issued as follows.
--- GB/T 7936-1987.
Introduction
In the hydraulic drive system, the power is transmitted and controlled through a closed loop pressurized fluid to achieve.
Positive displacement pumps and motors are two components for the hydraulic drive system. No-load displacement is the basic performance parameters of displacement pumps and motors
First, the volume of liquid per rotation axis that is discharged.
This standard aims to unify displacement pumps and motor-load displacement measurement method in order to enable the performance of different pump or motor
Comparison.
Hydraulic pump and motor-load displacement measurement method
1 Scope
This standard specifies the method for measuring displacement hydraulic pump and motor load displacement at continuous speed steady conditions and regulations.
When subjects were tested as a pump element in the input shaft mechanical energy, hydraulic energy output port; and subjects tested as a motor element
When hydraulic energy from the oil input port, an output shaft mechanical energy.
Note. The measurement accuracy is divided into A, B, C three levels, see Appendix A.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 786.1 fluid power systems and components - Graphic symbols and circuit diagram - Part 1. for general use and data processing of FIG.
Symbol (GB/T 786.1-2009, ISO 1219-1.2006, IDT)
GB/T 3141 Industrial liquid lubricants - ISO viscosity classification (GB/T 3141-1994, eqvISO 3448.1992)
GB/T 7631.2 Lubricants, industrial oils and related products (L class) classification - Part 2. H (Hydraulic systems)
(GB/T 7631.2-2003, ISO 6743-4.1999, IDT)
GB/T 17446 fluid power systems and components vocabulary (GB/T 17446-2012, ISO 5598.2008, IDT)
GB/T 17491 pumps, test methods and the expression of motors and integral transmissions steady performance (GB/T 17491-2011,
ISO 4409.2007, MOD)
3 Terms and Definitions
GB/T 17446 and define the following terms and definitions apply to this document.
3.1
The direction of rotation directionofrotation
Observe the direction of the axis of rotation from the shaft end.
Note. When the case in question, it is appropriate diagram indicate.
3.2
Volume flow volumeflowrate
It flows through the flow channel unit time cross-sectional volume of liquid.
3.3
No-load displacement derivedcapacity
Pump or motor out (forward) and the intake port (a) the volume of the liquid is zero pressure port of discharge per revolution. This value is specified by the pump or motor test
Under experimental conditions used in different outlet pressure (pump) or inlet pressure (motor) measurement data is calculated.
4 Symbols and units
Symbols and units used in this standard amount shown in Table 1.
Graphic symbols used in this standard in line with the provisions of GB/T 786.1 of.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 7936-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 7936-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 7936-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 7936-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 7936-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7936-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|