|
US$499.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6931.2-2020: Belt drives - Vocabulary - Part 2: V-belts and V-ribbed belt drives
Status: Valid GB/T 6931.2: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 6931.2-2020 | English | 499 |
Add to Cart
|
5 days [Need to translate]
|
Belt drives - Vocabulary - Part 2: V-belts and V-ribbed belt drives
| Valid |
GB/T 6931.2-2020
|
| GB/T 6931.2-2008 | English | 479 |
Add to Cart
|
3 days [Need to translate]
|
Belt drives vocabulary -- Part 2: V-belts and V-ribbed belt drives vocabulary
| Obsolete |
GB/T 6931.2-2008
|
| GB/T 6931.2-1986 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
Drives using V-belts and grooved pulleys--Terminology
| Obsolete |
GB/T 6931.2-1986
|
PDF similar to GB/T 6931.2-2020
Basic data | Standard ID | GB/T 6931.2-2020 (GB/T6931.2-2020) | | Description (Translated English) | Belt drives - Vocabulary - Part 2: V-belts and V-ribbed belt drives | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J18 | | Classification of International Standard | 21.220.10 | | Word Count Estimation | 27,221 | | Date of Issue | 2020-03-31 | | Date of Implementation | 2021-02-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 6931.2-2020: Belt drives - Vocabulary - Part 2: V-belts and V-ribbed belt drives---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Belt drives - Vocabulary - Part 2.V-belts and V-ribbed belt drives
ICS 21.220.10
J18
National Standards of People's Republic of China
Replace GB/T 6931.2-2008
Belt transmission terms
Part 2.V-belt and V-belt drive
(ISO 1081.2013, Beltdrives-V-beltsandV-ribbedbelts,
2020-03-31 released
2021-02-01 implementation
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Foreword
GB/T 6931 "Belt Transmission Terminology" is divided into 3 parts.
---Part 1.Basic terminology;
---Part 2.V-belt and V-belt drive;
---Part 3.Synchronous belt drive.
This part is Part 2 of GB/T 6931.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
This part replaces GB/T 6931.2-2008 ``Belt Transmission Terminology Part 2.V-belt and Poly V-belt Transmission Terminology'', and
Compared with GB/T 6931.2-2008, the main technical changes except for editorial changes are as follows.
---Deleted normative reference documents (see Chapter 2 of the.2008 edition);
---Modified the symbols of V-belt/section width, height, relative height (see 2.1.3, 2.1.4, 2.1.5, 2.1.6, 3.1.3,
3.1.4, 3.1.5, 3.1.6);
---Modified the symbols of V-belt wheel groove angle, wheel groove pitch width, reference width, reference line difference, effective width, and effective line difference (see 2.2.2,
2.2.3, 3.1.1, 3.1.4, 4.1.1, 4.1.4, 3.2.2, 3.2.3, 4.1.1, 4.1.4, 5.1.1, 5.1.4 of the.2008 edition);
---Modified the symbols of the V-ribbed belt wedge spacing, pulley groove angle, and effective line difference (see 5.1.5, 5.2.7, 5.2.13,.2008 version 6.1.5,
6.2.7, 6.2.13);
--- Deleted the term and definition of "V-ribbed belt" (see 6.1.1 of the.2008 edition);
---Added the term and definition of "elastic belt" (see 5.1.3);
---Added the term and definition of "free length" (see 5.1.4.1);
---Added the term and definition of "transmission length" (see 5.1.4.2);
---Added the term and definition of "elongation" (see 5.1.4.3);
--- Added a schematic diagram of the term "outer diameter" (see Figure 15);
--- Added terms and definitions related to tension and modulus (see 5.3 and 5.4).
This section uses the redrafting method to modify and adopt ISO 1081.2013 "V-belt and V-ribbed belt and pulley terminology for belt drive".
Compared with ISO 1081.2013, this part has many structural adjustments. Appendix A lists the differences between this part and ISO 1081.2013.
A list of chapter number comparisons.
Compared with ISO 1081.2013, this part has technical differences. Appendix B gives a list of corresponding technical differences and their reasons.
This section has made the following editorial changes.
---Modified the standard name;
---Added an informative appendix "Terms of the main types of friction belts" (see Appendix C).
This part was proposed by China Machinery Industry Federation.
This part is under the jurisdiction of the National Belt Wheels and Belt Standardization Technical Committee (SAC/TC428).
Drafting organizations of this section. China Machinery Productivity Promotion Center, Weishi County Jiulong Rubber and Plastic Co., Ltd., Sichuan Deen Precision Technology Co., Ltd.
Company, Qingdao Product Quality Supervision and Inspection Institute, Wuxi Zhonghui Rubber Technology Co., Ltd., Ningbo Kaichi Adhesive Tape Co., Ltd., Ningbo Fengmao
Far East Rubber Co., Ltd., Wuxi Belt Belt Co., Ltd.
The main drafters of this section. Qin Shuan, Zhou Peng, Fan Jingyun, Lei Yongzhi, Hao Yongliang, Zhu Shusheng, Ying Jianli, Wang Juncheng, Wu Yizhen.
The previous versions of the standards replaced by this part are as follows.
---GB/T 6931.2-1986, GB/T 6931.2-2008.
Belt transmission terms
Part 2.V-belt and V-belt drive
1 Scope
This part of GB/T 6931 defines the terms, definitions and symbols of V belts and V belt wheels, V-ribbed belts and V-ribbed belt wheels.
This part is applicable to V-belt and V-ribbed belt transmission applications.
Note. Refer to Appendix C for the main types of friction belts.
2 General terms, definitions and symbols for V belt and V belt wheel
2.1 Belt
2.1.1
Pitchline
When the belt is bent perpendicular to its bottom edge, any contour in the belt that remains unchanged in its original length.
Note. See Figure 1.
figure 1
2.1.2
Pitchzone
A surface composed of all pitch lines.
Note. See Figure 2.
figure 2
2.1.3
Pitchwidth
Wp
The section width of the belt.
|