HOME   Cart(12)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 5169.15-2015 English PDF

US$534.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5169.15-2015: Fire hazard testing for electric and electronic products -- Part 15: Test flames. 500 W flames -- Apparatus and confirmation test methods
Status: Valid

GB/T 5169.15: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 5169.15-2015English534 Add to Cart 4 days [Need to translate] Fire hazard testing for electric and electronic products -- Part 15: Test flames. 500 W flames -- Apparatus and confirmation test methods Valid GB/T 5169.15-2015
GB/T 5169.15-2008EnglishRFQ ASK 4 days [Need to translate] Fire hazard testing for electric and electronic products -- Part 15: Test flames. 500W flames -- Apparatus and confirmative test methods Obsolete GB/T 5169.15-2008

PDF similar to GB/T 5169.15-2015


Standard similar to GB/T 5169.15-2015

GB/T 5169.19   GB/T 5169.11   GB/T 5169.16   GB/T 5169.13   GB/T 5169.23   GB/T 5169.12   

Basic data

Standard ID GB/T 5169.15-2015 (GB/T5169.15-2015)
Description (Translated English) Fire hazard testing for electric and electronic products -- Part 15: Test flames. 500 W flames -- Apparatus and confirmation test methods
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K04
Classification of International Standard 13.220.40; 29.020
Word Count Estimation 27,211
Date of Issue 2015-10-09
Date of Implementation 2016-05-01
Older Standard (superseded by this standard) GB/T 5169.15-2008
Quoted Standard GB/T 16839.1-1997; GB/T 16839.2-1997; ISO/IEC 13943-2008; ASTM-B187/B187M-06
Adopted Standard IEC 60695-11-3-2012, IDT
Regulation (derived from) National Standard Announcement 2015 No.31
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies two produce 500 W nominal pre - mixed test flame specific requirements. The total height of the flame was about 125 mm. Two test methods given in this standard: Method A flame methane fuel, Method C flame methane or propane as fuel.

GB/T 5169.15-2015: Fire hazard testing for electric and electronic products -- Part 15: Test flames. 500 W flames -- Apparatus and confirmation test methods


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Fire hazard testing for electric and eletronic products - Part 15. Test flames - 500 W flames - Apparatus and confirmational test methods ICS 13.220.40; 29.020 K04 National Standards of People's Republic of China Replacing GB/T 5169.15-2008 Fire hazard testing for electric and electronic products - Part 15. Test flames - 500W flames - Apparatus and Confirmatory test Firehazardtestingforelectricandeletronicproducts-Part 15. (IEC 60695-11-3.2012, Firehazardtesting-Part 11-3. Testflames- 500Wflames-Apparatusandconfirmationaltestmethods, IDT) Issued on. 2016-05-01 2015-10-09 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Method A --- using conventional means generates standard 500W nominal test flame 1 5 Method C --- with non-adjustable means for generating standard 500W nominal test flame 4 Classification and nomenclature 6 6 Appendix A (normative) Test equipment - Method A 9 Appendix B (normative) Test equipment - Method C 13 Annex C (informative) recommend any available means test flame 18 Test device Annex D (informative) apparatus for testing 19 Test device Annex E (informative) for Materials Testing 20 References 21

Foreword

GB/T 5169 "Fire hazard testing for electric and electronic products" have or plan to release the following sections. --- Part 1. Terminology concerning fire tests; --- Part 2. Guidance for assessing the fire hazard - General; --- Part 5. Test flames - Needle-flame test methods for confirming test methods and guidelines; --- Part 9. Guidance for assessing the fire hazard of preselection testing procedures - General; --- Part 10. Glowing/hot wire based test methods - Glow - wire apparatus and common test procedure; --- Part 11. Glowing/hot wire based glow wire flammability test methods of the finished product; --- Part 12. Glowing/hot wire based test methods for materials glow wire flammability index (GWFI) test methods; --- Part 13. Glowing/hot wire based test methods - Glow - wire ignition temperature materials (GWIT) test methods; --- Part 14. Test flames - 1kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance; --- Part 15. Test flames - 500W flames - Apparatus and confirmation test methods; --- Part 16. Test flames - 50W horizontal and vertical flame test methods; --- Part 17. Test flames - 500W flame test methods; --- Part 18. General toxic combustion stream; --- Part 19. Abnormal heat - Mould stress relief distortion test; --- Part 20. Surface spread of flame test methods - Summary and relevance; --- Part 21. Abnormal heat - Ball pressure test; --- Part 22. Test flames - 50W flames - Apparatus and confirmation test methods; --- Part 23. Test flames tubular material 500W vertical flame test methods for the polymerization; --- Part 24. Guidance for assessing the fire hazard insulating liquid; --- Part 25. Smoke obscuration - General; --- Part 26. Smoke obscuration - Summary and relevance of test methods; --- Part 27. Smoke obscuration - Small-scale static test instrument described; --- Part 28. Smoke obscuration - Small-scale static test material; --- Part 29. Heat release - General; --- Part 30. Heat release - Summary and relevance of test methods; --- Part 31. Surface spread of flame - General; --- Part 32. Heat release heat insulating fluid is released; --- Part 33. Guidance for assessing the fire hazard from flammable General; --- Part 34. Guidance for assessing the fire hazard from flammable Test methods - Summary and relevance; --- Part 35. General corrosion of combustion flow hazards; --- Part 36. corrosive combustion flow hazards Summary and relevance of test methods; --- Part 38. Toxicity Test Methods for combustion flows Summary and relevance; --- Part 39. Toxicity test results illustrate the use and combustion stream; --- Part 40. Toxic poison flow combustion efficiency device and test methods for assessment; --- Part 41. Toxicity toxic combustion flow calculation and assessment of the effectiveness of the test results described; --- Part 42. Test flames Confirmation Test Guidelines; --- Part 44. Guidance for assessing the fire hazard fire hazard assessment. This section GB/T Part of 155,169. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 5169.15-2008 "Part 15 Fire hazard testing for electric and electronic products. Test flames - 500W fire Flame device and confirmation test methods ", compared with the GB/T 5169.15-2008 main technical changes are as follows. --- Test will confirm the initial temperature of the copper block by "100 ℃ ± 5 ℃" to "100 ℃ ± 2 ℃" (see Chapters 4 and 5, 2008 Chapter edition chapters 4 and 6); --- Added for each confirmatory test should be stressed that "three" test (see 4.4.2,4.4.3,5.4.2 and 5.4 3, 2008 edition 4.4.2,4.4.3,6.4.2 and 6.4.3); --- Deleted all references to Method B and Method D content (2008 edition Chapter 5, Chapter 7, Annexes B and D); --- Increasing the size of the test flame diagram (see Figure 1); This section uses the translation method is equivalent to using IEC 60695-11-3.2012 "Fire hazard testing - Part 11-3. Test flames - 500W Fire apparatus and confirmation test methods. " This part made the following editorial changes. --- Consistent with the existing standard series, the standard name will be changed to "Section 15 Fire hazard testing for electric and electronic products. Test flames 500W flames - Apparatus and confirmation test methods "; --- Deleted the last two paragraphs of Chapter 1 of informative content; --- The Chapter 2 Guidelines for the preparation of international standards IEC Guide104.1997 and ISO /IEC Guide51.1999 to "References." This part is proposed by the China Electrical Equipment Industrial Association. This section hazard testing Standardization Technical Committee (SAC/TC300) is administered by the National Electrical and Electronic Products fire. This section is responsible for drafting units. China Electric Apparatus Research Institute Limited. Participated in the drafting of this section. Weikai Detection Technology Co., Ltd., China Household Electrical Appliances Research Institute, the Ministry of Industry and Information Technology Institute of Electronics V Studies, Dongguan City, the Hua Electronic Technology Co., Ltd., Zhuhai Gree Electric Appliance Co., Ltd., Beijing Terrett Detection Technology Services Limited The company, Guangdong Entry-Exit Inspection and Quarantine Bureau Technology Center, Dongguan Comprehensive Inspection & Quarantine Technology Center, Ningbo Run-axis Auto Parts Co., Ministry of Public Security of Sichuan Fire Research Institute. The main drafters of this section. dare to expose new, Xia Qingyun, Wan Cheng, Zhangyuan Qin, Li Guangbin, Fan Lingyun, kaolinite pine, Wu Zheng, Zheng Shaofeng, Zhu steel, Songlin. This section was first released in 2001, the first revision in 2008, this is the second revision.

Introduction

Fire hazard testing for electric and electronic products, the best way is to faithfully reproduce the actual conditions. But in most cases it is impossible. Therefore, the best practice to simulate the actual effect occurs in accordance with the reality as closely as possible to Fire hazard testing for electric and electronic products. We developed a series of available standard test flame by the Advisory Committee on Safety (ACOS) initiated the work, including all products Commission Members will be required to test the flame power range. IEC 60695-11-5 describes the needle flame, GB/T 5169.22-2015 describes 50W Flame, GB/T 5169.14-2007 description is 1kW flame. This section gives two generating 500W flame test apparatus required instructions and test methods to confirm whether to meet the requirements of the flame Instructions. GB /Z5169.42-2013 is given a confirmation method pilot test of the flame. The first edition of this section describes four methods to generate 500W flame test, so that the user determine the selection order. Has been revoked Both methods (Method B and Method D), as follows. 500W test flame type gas Flame Approximate total height of the flame mm A premixed methane 125 B revocation C premixed methane or propane 125 D revocation A method was first published in 1994, based on existing devices. This method of flame methane fuel, some countries have made use Generation model years of strict rules burner. Method C in a non-adjusted basis means that the device is to produce highly repeatable and stable development of the special test flame. this Flame method to methane or propane as fuel. Development of the above two methods is the pre-technology improvements. Fire hazard testing for electric and electronic products - Part 15. Test flames - 500W flames - Apparatus and Confirmatory test

1 Scope

GB/T 5169 provisions of this section, two generating 500W nominal pre - mixed test flame specific requirements. The total height of the flame It was about 125mm. This section gives two test methods. Method A flame methane fuel, Method C flame methane or propane as fuel.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 16839.1-1997 Thermocouples - Part 1. indexing table (IEC 60584-1.1995, IDT) GB/T 16839.2-1997 thermocouple Part 2. Tolerances (IEC 60584-2. 1982, IDT) ISO /IEC 13943.2008 Fire Safety Glossary (Firesafety-Vocabulary) ASTM-B187/B187M-06 copper bus bar, wire and sections as well as general purpose wire rod, bar and section Specifications (StandardSpecifica- tionforCopper, BusBar, Rod, andShapesandGeneralPurposeRod, Bar, andShapes)

3 Terms and Definitions

ISO /IEC 13943.2008 and the following definition of terms and definitions apply to this document. 3.1 Standard 500W nominal test flame standardized500Wnominaltestflame Subject to this section and to meet all the technical requirements of the test flame Chapters 4 and 5 regulations. 4 Method A --- using conventional means generates standard 500W nominal test flame 4.1 Requirements This method produces standard 500W nominal test flame are as follows. Devices --- using FIG A.1 (Appendix A), the generation; --- Using the apparatus shown in Figure A.2, at 23 ℃, 0.1MPa1) conditions to 965mL/min ± 30mL/min flow rate for To the purity of not less than 98% of methane gas, and the back pressure reaches 125mm ± 5mm water column. The flame should be symmetrical and stable, and the test results can be confirmed 54s ± 2s 4.4 requirements. Figure A.3 should be used to confirm the test apparatus shown in Fig. In the laboratory fume hood/chamber, a gauge measuring the flame (see Figure 1) with the approximate dimensions shown in Figure 3 should read. 1) correction based on the measurement structure under actual conditions of use of the data.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5169.15-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5169.15-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5169.15-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5169.15-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 5169.15-2015?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5169.15-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.