GB/T 5154-2022 (GB/T5154-2022, GBT 5154-2022, GBT5154-2022) & related versions
Buy with any currencies (Euro, JPY, KRW...): GB/T 5154-2022 Preview this PDF: GB/T 5154-2022
GB/T 5154-2022: PDF in English (GBT 5154-2022)
GB/T 5154-2022
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.120.20
CCS H 61
Replacing GB/T 5154-2010
Magnesium and Magnesium Alloys Sheets and Strips
ISSUED ON: MARCH 09, 2022
IMPLEMENTED ON: OCTOBER 01, 2022
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative References ... 5
3 Terms and Definitions ... 6
4 Classification ... 6
5 Requirements ... 8
6 Test Methods ... 11
7 Inspection Rules ... 12
8 Marking, Packaging, Transportation, Storage and Quality Certificate ... 15
9 Purchaser Order (or Contract) Contents ... 17
Appendix A (Informative) Old & New Designations and Old & New States ... 18
Bibliography ... 19
Magnesium and Magnesium Alloys Sheets and Strips
1 Scope
This Document specifies the classification, requirements, test methods, inspection rules and
marking, packaging, transportation, storage and quality certificates and purchase orders (or
contracts) of magnesium and magnesium alloy sheets and strips.
This Document applies to magnesium and magnesium alloy sheets (hereinafter referred to as
sheets) and strips (hereinafter referred to as strips).
2 Normative References
The provisions in following documents become the essential provisions of this Document
through reference in this Document. For the dated documents, only the versions with the dates
indicated are applicable to this Document; for the undated documents, only the latest version
(including all the amendments) is applicable to this Document.
GB/T 3499 Magnesium Ingots
GB/T 5153 Designation and Composition of Wrought Magnesium and Magnesium Alloys
GB/T 7314 Metallic Materials - Compression Testing at Ambient Temperature
GB/T 8005.1 Aluminum and Aluminum Alloy Terms and Definitions - Part 1: Product and
Method of Processing and Treatment
GB/T 8170 Rules of Rounding off for Numerical Values & Expression and Judgement of
Limiting Values
GB/T 13748 (all parts) Chemical Analysis Methods of Magnesium and Magnesium Alloys
GB/T 16865 Test Pieces and Method for Tensile Test for Wrought Aluminum and
Magnesium Alloys Products
GB/T 17432 Methods for Sampling for Analyzing the Chemical Composition of Wrought
Aluminum and Aluminum Alloys
GB/T 26492.3 Defects for Wrought Aluminum and Aluminum Alloys Ingots and Products
- Part 3: Defects for Plates, Sheets and Strips
GB/T 32792 Packaging, Marking, Transportation and Storage of Magnesium Alloy
Processing Products
6.1.3 The chemical composition sampling of sheets and strips shall comply with the provisions
of GB/T 17432.
6.1.4 The determination of the analytical value shall adopt the rounding-off comparison method.
The rounding-off rules of numerical values shall be carried out according to the relevant
provisions of GB/T 8170. The rounding-off digits shall be consistent with the limit digits
specified in GB/T 3499, GB/T 5153 and Table 2.
6.2 Dimensional deviation
6.2.1 The thickness is measured with a micrometer with an accuracy of 0.01mm or a measuring
tool with the same accuracy. The sheets shall be measured within a range of no less than 115mm
from the long-sided sheet corner and no less than 20mm from the edge of the sheet; the strip
shall be measured thickness in the middle of the end.
6.2.2 The length and width shall be measured by a steel tape with an accuracy of 1mm or a
measuring tool with the same accuracy.
6.2.3 When measuring the unevenness, the sheet shall be placed freely on the platform; and the
gap between the sheet and the platform shall be measured. When there are several waves in a
sheet, the height of the largest wave shall be measured. Edge waves can be measured with
measuring tools such as feeler gauges, etc.
6.2.4 Dimensional measurements shall not be rounded-off.
6.3 Mechanical properties
6.3.1 The tensile test of sheet at the room temperature shall be carried out according to the
method specified in GB/T 16865.
6.3.2 The compression test of sheet at the room temperature shall be carried out according to
the method specified in GB/T 7314.
6.4 Appearance quality
In natural scattered light, check the appearance quality visually or using a measuring tool.
7 Inspection Rules
7.1 Inspection and acceptance
7.1.1 The sheets and strips shall be inspected by the technical supervision department of the
supplier to ensure that the product quality conforms to the provisions of this Document and the
purchase order (or contract); and the quality certificate shall be filled out.
7.1.2 The purchaser shall inspect the received products according to the provisions of this
7.5.4 When the appearance quality of the product is unqualified, it shall be judged as
unqualified.
8 Marking, Packaging, Transportation, Storage and Quality
Certificate
8.1 Marking
8.1.1 Product marking
The sheets and strips that are inspected qualified shall be marked, which shall indicate:
a) Designation;
b) State;
c) Specification;
d) Batch No. (sheet No.).
8.1.2 Marking of package box
There shall be marks on the two ends of the package box, which shall indicate:
a) Name of supplier;
b) Designation;
c) State;
d) Specification;
e) Batch No. and net weight;
f) The No. of this Document.
8.2 Packaging
8.2.1 The sheets are packed in wooden boxes; and the boxes shall be dry. Two layers of oil-
impregnated paper shall be placed on the top and bottom of the sheet stack in the box; the entire
sheet stack shall be wrapped with plastic cloth or moisture-proof paper; and the sheet shall not
be exposed.
8.2.2 The packaging of the sheet shall be carried out in accordance with the provisions of GB/T
32792.
8.2.3 There shall be a packing list in each box, which shall indicate:
a) the name of the supplier;
b) designation;
c) state;
d) specification and batch No.;
e) quantity and net weight;
f) the No. of this Document;
g) date of packaging.
8.3 Transportation and storage
8.3.1 The transported goods of the product shall be clean, dry and free of pollutants; rain and
snow protection shall be carried out during transportation to ensure that the packing box is not
corroded. It shall not be packed together with chemically active substances, moist materials and
flammable materials in the same vehicle for transportation; appropriate loading and unloading
methods shall be adopted to prevent damage to the packing box (substance).
8.3.2 After the purchaser receives the product, it shall be kept in a clean, dry, non-corrosive
atmosphere, no rain and snow intrusion, no chemically active substances, no moisture materials
or no flammable materials in the warehouse. The product shall be inspected for corrosion within
10 days and the acceptance shall be organized. Sheets that have been stored for a long time
shall be regularly treated with anti-corrosion.
8.4 Quality certificate
Each batch of products shall be accompanied by a product quality certificate, which shall
indicate:
a) the name of the supplier;
b) product name;
c) designation;
d) state;
e) net weight;
f) Specifications;
g) batch number;
......
| Standard ID | GB/T 5154-2022 (GB/T5154-2022) | | Description (Translated English) | Magnesium and magnesium alloys sheets and strips | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H61 | | Classification of International Standard | 77.120.20 | | Word Count Estimation | 15,189 | | Date of Issue | 2022-03-09 | | Date of Implementation | 2022-10-01 | | Drafting Organization | Chinalco Luoyang Copper Processing Co., Ltd., Zhengzhou Qingyan Alloy Technology Co., Ltd., Shanxi Yinguang Huasheng Magnesium Co., Ltd., Northeast Light Alloy Co., Ltd., Zhongshan Jaguar Special Materials Technology Co., Ltd., Nonferrous Metal Technology and Economic Research Institute Co., Ltd., Zibo Deyuan Metal Materials Co., Ltd., Fujian Institute of Technology, Shandong Yinguang Yuyuan Light Metal Precision Forming Co., Ltd., Fujian Kunfu Co., Ltd., Dongguan Yi'an Technology Co., Ltd. | | Administrative Organization | National Nonferrous Metals Standardization Technical Committee (SAC/TC 243) | | Proposing organization | China Nonferrous Metals Industry Association | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Administration |
|