GB/T 38023-2019 PDF English
US$95.00 · In stock · Download in 9 secondsGB/T 38023-2019: Finishing requirements for parts and assemblies of the mechanical watch movements Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 38023-2019 | English | 95 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Finishing requirements for parts and assemblies of the mechanical watch movements
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 38023-2019
GB/T 38023-2019: Finishing requirements for parts and assemblies of the mechanical watch movements
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT38023-2019
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 39.040.10
Y 11
Finishing requirements for parts and assemblies of
the mechanical watch movements
ISSUED ON: AUGUST 30, 2019
IMPLEMENTED ON: MARCH 01, 2020
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Requirements ... 4
4 Inspection method ... 6
Finishing requirements for parts and assemblies of
the mechanical watch movements
1 Scope
This Standard specifies the requirements and inspection methods for parts and
assemblies of the mechanical watch movements.
This Standard applies to parts and assemblies of the mechanical watch
movements that have undergone finishing processing (hereinafter referred to
as "parts and assemblies").
2 Normative references
The following documents are indispensable for the application of this document.
For dated references, only the dated version applies to this document. For
undated references, the latest edition (including all amendments) applies to this
document.
GB/T 10610, Geometrical product specifications (GPS) - Surface texture:
Profile method - Rules and procedures for the assessment of surface texture
3 Requirements
3.1 Surface quality requirements of metal parts and assemblies
Metal parts and assemblies shall not have surface defects, such as indentation,
pits, scratches, burn marks, local highlights after polishing, and spots and
blisters after electroplating. The surface color of all parts and assemblies shall
be uniform and coordinated.
3.2 Finishing requirements for metal parts and assemblies
3.2.1 General
Mirror polishing for finishing of metal parts and assemblies means that the
surface roughness Ra value shall not be greater than 0.05 μm; polishing means
that the surface roughness Ra value shall not be greater than 0.2 μm.
As long as the finishing process meets the surface roughness requirements,
there is no limit for the processing method.
3.2.2 Gear train parts
3.2.5.3 The gem hole of the splint shall be chamfered and polished.
3.2.6 Automatic parts
3.2.6.1 The gear train and splint parts in the automatic train shall meet the
requirements in 3.2.2 and 3.2.5 respectively.
3.2.6.2 The surface of the automatic hammer shall be flat; the upper and lower
planes shall be eliminated from irregular processing patterns; the outer circle of
the hammer edge shall be chamfered and polished; the upper plane and
chamfers can be processed by ray grinding or sandblasting.
3.2.6.3 The exposed upper surface of the bearing of the automatic hammer
shall be polished.
3.2.7 Screw
3.2.7.1 The upper plane of the screw cap shall be mirror polished; the outer
circle of the screw cap shall be chamfered and polished.
3.2.7.2 The end face of the screw thread shall be flat.
3.2.8 Printing plate
3.2.8.1 The printing on the printing plate (such as calendar ring, weekly
calendar plate, moon phase plate) shall be clear, full and fast. There shall be
no broken lines, uneven thickness, and obvious shortage of fonts and numbers.
There shall be no defects such as brushed fonts, deformation, and white spots.
3.2.8.2 The spray paint color of the dial shall be uniform; the paint surface shall
be smooth and even. There shall be no discoloration, yellowing, peeling,
fingerprints, sticky silk, paint residue or other debris.
3.2.9 Additional mechanism parts
3.2.9.1 The gear train and splint parts in the additional mechanism shall meet
the requirements in 3.2.2 and 3.2.5 respectively.
3.2.9.2 The upper surface of rod-type parts shall be polished; the surface shall
be smooth and the contour lines shall be smooth.
4 Inspection method
4.1 Inspection conditions
Except for special requirements, the ambient temperature for inspection is
18 °C ~ 25 °C; during the entire inspection process, the temperature fluctuation
is not more than 2 °C; the relative humidity is not more than 70%.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 38023-2019 be delivered?Answer: The full copy PDF of English version of GB/T 38023-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 38023-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 38023-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 38023-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 38023-2019?A step-by-step guide to download PDF of GB/T 38023-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 38023-2019".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|