|
US$119.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 34719-2017: Standard test method for performance of structural wood-based panel under uniform loads
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 34719-2017 | English | 119 |
Add to Cart
|
3 days [Need to translate]
|
Standard test method for performance of structural wood-based panel under uniform loads
| Valid |
GB/T 34719-2017
|
PDF similar to GB/T 34719-2017
Basic data | Standard ID | GB/T 34719-2017 (GB/T34719-2017) | | Description (Translated English) | Standard test method for performance of structural wood-based panel under uniform loads | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | B70 | | Classification of International Standard | 79.060 | | Word Count Estimation | 6,672 | | Date of Issue | 2017-11-01 | | Date of Implementation | 2018-05-01 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 34719-2017: Standard test method for performance of structural wood-based panel under uniform loads
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Standard test method for performance of structural wood-based panel under uniform loads
ICS 79.060
B70
National Standards of People's Republic of China
Test method for uniform load of structural plywood
Posted.2017-11-01
2018-05-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
Please note that some of this document may be patentable. The issuing agencies of this document do not bear the responsibility of identifying these patents.
This standard proposed by the State Forestry Administration.
This standard by the National Wood Standardization Technical Committee structure timber sub-technical committee (SAC/TC41/SC4) centralized.
This standard was drafted. Chinese Academy of Forestry Timber Industry Institute, Taizhou Eurasian Wood Co., Ltd., Hubei Baoyuan Wood
Limited, the International Bamboo and Rattan Center, Heilongjiang Institute of Timber Science and Technology, Taizhou City of Quality and Technical Supervision and Inspection Institute, Manchuria Lianzhong Wood limited
Responsible company.
The main drafters of this standard. Zhou Haibin, Lin Limin, Wang Ge, Yu Huaqiang, Wang Chunming, Xu Wentao, Jin Guoqing, Yuan Gongzhi, Lv Yi'an, Jin Sha,
Wang Xiuquan.
Test method for uniform load of structural plywood
1 Scope
This standard specifies the structural use of artificial board uniform load performance test terms and definitions, sample selection, specimen size, specimen handling, testing
Device, test procedure, test result processing and test report.
This standard applies to structural use of artificial board as a building wall panels, floor panels and roofing uniform load test.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 18259 Panels and decorative surface terminology
GB 50005 wood structure design specifications
3 Terms and definitions
GB/T 18259 and GB 50005 defined by the following terms and definitions apply to this document.
3.1
Support member framingmember
Located in the wall panels, floor panels or roof panels, the upper part of the load from the supporting role.
3.2
Guarantee load proofload
A load value used in the load-bearing performance test is to ensure that the structural plywood meets the requirements of the relevant structural safety and is normal
Use the process to maintain structural integrity. The guaranteed load should be determined by both supply and demand based on the intended use, usually between the target use (or
Meter) between the load and the ultimate load.
4 sample selection
The sample should be representative of the product batch to be evaluated. Sample selection should be based on the internal structure of the product properties (density, etc.), product thickness
And thickness deviation and other requirements. The size of the number of samples should be able to make the measurement of the performance to the desired level of confidence prevail, and the minimum number of samples should be
Ensure that each test condition test 10 times.
5 specimen size
5.1 should be the required size of the specimen cut into pieces.
5.2 Test piece length direction should be perpendicular to the main support member, the main support member center distance of 2 times.
5.3 specimen width should not be less than 595mm.
5.4 The thickness of the test piece shall be measured under dry conditions and recorded in the test report.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 34719-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 34719-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 34719-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 34719-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|