GB/T 34592-2017 PDF English
US$150.00 · In stock · Download in 9 secondsGB/T 34592-2017: Steering force steering angle detector for steering wheel of automobile Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 34592-2017 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Steering force steering angle detector for steering wheel of automobile
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 34592-2017
GB/T 34592-2017: Steering force steering angle detector for steering wheel of automobile---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT34592-2017
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.180
R 17
Steering force steering angle detector
for steering wheel of automobile
Issued on: OCTOBER 14, 2017
Implemented on: MAY 1, 2018
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the PRC;
Standardization Administration of the PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 4
4 Requirements ... 5
5 Inspection methods ... 7
6 Inspection rules ... 14
7 Marking, labeling, packaging, transport, and storage ... 16
Steering force steering angle detector
for steering wheel of automobile
1 Scope
This Standard specifies the requirements, measurement range, inspection
methods, inspection rules, marking, packaging, and storage of steering force
steering angle detector for steering wheel of automobile (hereafter known as
force-angle detector for short).
This Standard applies to the design, production, and inspection of force-angle
detector.
2 Normative references
The following documents are indispensable for the application of this document.
For the dated references, only the versions with the dates indicated are
applicable to this document. For the undated references, the latest version
(including all the amendments) are applicable to this document.
GB/T 17626.3-2016 Electromagnetic compatibility - Testing and
measurement techniques - Radiated, radio-frequency, electromagnetic field
immunity test
3 Terms and definitions
The following terms and definitions are applicable to this document.
3.1 Steering force
The tangential force which acts on the outer edge of the steering wheel when
steering the steering wheel.
3.2 Steering torque
The torque of steering force relative to shaft when steering the steering wheel.
3.3 Steering angle
4.6 Environmental suitability
After the force-angle detector is subjected to the following inspections, the
appearance and indication error shall meet the requirements of 4.1.2 and 4.2,
respectively.
a) Low temperature test. (-40±2)°C, duration is 16 h;
b) High temperature test. (70±2)°C, duration is 16 h;
c) Steady damp heat test. Temperature is (40±2)°C. Relative humidity is
(93±3)%. Duration is 16 h.
4.7 Transport environment suitability
The force-angle detector, under the conditions of transport package, is
subjected to constant-frequency vibration inspection. After inspection, all parts
shall not be loose and damaged. The appearance and indication error shall
comply with the requirements of 4.1.2 and 4.2, respectively.
5 Inspection methods
5.1 Inspection conditions
The inspection conditions of force-angle detector are.
Temperature. -10 °C~50 °C;
Relative humidity. not more than 85%;
Atmospheric pressure. 86 kPa~106 kPa;
During each inspection, permissible temperature change is not more than
1 °C/10 min.
5.2 Instruments and equipment for inspection
The instruments and equipment for inspection are shown in Table 2.
time (not less than 2h), to achieve thermal stability inside the force-angle
detector. The tolerance of each temperature is ±2 °C. The rate of change of
temperature shall be less than 1 °C/min.
PLACE the force-angle detector and the force-angle detector inspection device
in a temperature test chamber; TURN on the force-angle detector to warm up
and CLEAR it; on the operating handle of force-angle detector, HANG standard
weights (10 kg) with a range of 20% or APPLY the same magnitude of force; at
a rate of change of not more than 1 °C/min (average of not more than 5 min),
gradually RAISE (LOWER) the temperature in the temperature test chamber to
50 °C and -10 °C; after the temperature inside the test chamber is stable, it will
be kept warm for 2 h; READ the indicating value of force-angle detector
(steering force). SELECT 20%, 50%, 100% of the full range of the force-angle
detector; and in the clockwise and counterclockwise rotation directions,
respectively, SELECT 3 points as test points; READ the indicating value of
force-angle detector (steering angle). CALCULATE the corresponding
indication error.
5.11 Radiated, radio-frequency, electromagnetic field immunity
The equipment for inspection shall meet the requirements of Chapter 6 of GB/T
17626.3-2016. The inspection shall be conducted according to the method
specified in GB/T 17626.3-2016. The level shall be Level 1.
5.12 Automobile ignition interference
Requirements for inspection equipment.
a) Discharge electrode spacing is 1 cm~1.5 cm;
b) Discharge frequency is 12 times/s~200 times/s;
c) Discharge voltage is 1 kV~20 kV.
The force-angle detector is turned on; and the automobile ignition interference
inspection device is turned on. The force-angle detector is placed 50 cm~100
cm away from the center of discharge electrode and swept at a discharge
frequency of 12 times/s~200 times/s. OBSERVE whether there is an
abnormality in the force-angle detector display. If there is any abnormality,
CONTINUE the inspection at the abnormal frequency point for 5 min. If there is
no abnormality, CONTINUE the inspection at a discharge frequency of 60
times/s for 10 min. During and after the inspection, the technical performance
of force-angle detector shall be normal.
5.13 Environmental suitability
b) After the test temperature and relative humidity reach the set values and
are stable, according to 4.6c), SET the duration of the test; and
PERFORM steady damp heat test;
c) After the test, the force-angle detector under test shall be kept in the test
chamber. In 0.5h, LOWER the relative humidity to 73%~77%, and then
ADJUST the temperature to the laboratory temperature;
d) REMOVE the force-angle detector under test from the test chamber and
REMOVE the water drops; PLACE it at the laboratory temperature for 3 h;
e) CHECK the technical performance of the tested force-angle detector.
5.14 Transport environment suitability
Force-angle detector, under the conditions of transport package, is subjected
to the constant-frequency vibration inspection under the following conditions.
Frequency is 33 Hz; acceleration is 70 m/s2; vibration time is 4 h in vertical
direction, 2 h left and right, and 2 h front and rear. After the inspection,
PERFORM appearance examination and indication error test.
5.15 Appearance examination
Manual visual examination.
6 Inspection rules
6.1 Inspection classification
The inspection of force-angle detector is divided into type inspection and exit-
factory inspection.
6.2 Type inspection
In any of the following cases, it shall carry out type inspection.
a) Pilot production of product new design or product pattern evaluation;
b) Production line change or plant transfer;
c) Production recovery after a suspension;
d) After formal production, if there are great changes in structure, material,
and technology and the product performance may be affected;
e) In normal production, after the output reaches 500, it shall conduct
periodic inspection;
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 34592-2017 be delivered?Answer: The full copy PDF of English version of GB/T 34592-2017 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 34592-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 34592-2017_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 34592-2017 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 34592-2017?A step-by-step guide to download PDF of GB/T 34592-2017_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 34592-2017".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|