|
US$519.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30595-2024: Extruded polystyrene(XPS) board system for building thermal insulation
Status: Valid GB/T 30595: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 30595-2024 | English | 519 |
Add to Cart
|
5 days [Need to translate]
|
Extruded polystyrene(XPS) board system for building thermal insulation
| Valid |
GB/T 30595-2024
|
| GB/T 30595-2014 | English | 168 |
Add to Cart
|
1 days [Need to translate]
|
External thermal insulation composite systems based on extruded polystyrene
| Valid |
GB/T 30595-2014
|
PDF similar to GB/T 30595-2024
Basic data | Standard ID | GB/T 30595-2024 (GB/T30595-2024) | | Description (Translated English) | Extruded polystyrene(XPS) board system for building thermal insulation | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | P32 | | Classification of International Standard | 91.120.10 | | Word Count Estimation | 26,274 | | Date of Issue | 2024-09-29 | | Date of Implementation | 2025-04-01 | | Older Standard (superseded by this standard) | GB/T 30595-2014 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 30595-2024: Extruded polystyrene(XPS) board system for building thermal insulation---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Extruded polystyrene(XPS) board system for building thermal insulation
Extruded polystyrene board (XPS) for building insulation
System Materials
Extruded polystyrene (XPS) board system for building thermal insulation
ICS 91.120.10
CCS P 32
National Standard of the People's Republic of China
Replaces GB/T 30595-2014
Released on 2024-09-29
2025-04-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface ... Ⅲ
1 Scope ... 1
2 Normative references ... 1
3 Terms and Definitions 2
4 General requirements ... 3
5 Technical requirements ... 5
5.1 XPS board thin plaster exterior wall insulation system ... 5
5.2 XPS board precast concrete sandwich insulation exterior wall panel system ... 8
5.3 XPS floor insulation system ... 9
5.4 XPS board roof insulation system ... 9
6 Test methods ... 10
6.1 Maintenance conditions and test environment 10
6.2 Numerical rounding 10
6.3 XPS board thin plaster exterior wall insulation system ... 10
6.4 XPS board for precast concrete sandwich insulation exterior wall panel system ... 14
6.5 XPS board for floor insulation system ... 14
6.6 XPS board for roof insulation system ... 15
7 Inspection Rules ... 16
7.1 Factory Inspection ... 16
7.2 Type inspection ... 16
7.3 Batching and Sampling 17
8 Logo and accompanying documents ... 17
8.1 Logo ... 17
8.2 Accompanying Documents 17
9 Packaging, transportation and storage ... 18
9.1 Packaging ... 18
9.2 Transportation ... 18
9.3 Storage 18
Appendix A (Normative) XPS board compression deformation test method ... 19
A.1 Test instruments and equipment 19
A.2 Test specimen 19
A.3 Test process 19
A.4 Test results 20
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting is required.
This document replaces GB/T 30595-2014 "Extruded polystyrene board (XPS) thin plaster external wall insulation system materials" and
Compared with GB/T 30595-2014, in addition to structural adjustments and editorial changes, the main technical changes are as follows.
Changed the scope (see Chapter 1, Chapter 1 of the.2014 edition); a)
Deleted the base wall, plastering layer, finishing layer, protective layer, adhesive, plastering mortar, fiberglass mesh, plastic anchor bolts, accessories
Terms and definitions (see 3.2~3.5, 3.8~3.12 of the.2014 edition);
b)
Added XPS board precast concrete sandwich insulation exterior wall panel system, XPS board wet floor insulation system, XPS board dry floor insulation system
Terms and definitions of surface insulation system and XPS board roof insulation system (see 3.3 to 3.6);
c)
The general provisions have been deleted (see Chapter 4 of the.2014 edition); d)
Added general requirements (see Chapter 4); e)
Changed the technical requirements for XPS boards and plastering mortar used in XPS board thin plastering external wall insulation system (see 5.1.2, 5.1.5,.2014
Version 5.2, 5.5);
f)
Added XPS board precast concrete sandwich insulation exterior wall panel system, XPS board floor insulation system, XPS board roof insulation system
Technical requirements for XPS boards (see 5.2~5.4);
g)
The XPS board thin plaster exterior wall insulation system and its compression strength, bending deformation, dimensional stability, water vapor
Test method for air permeability coefficient (see 6.3.1, 6.3.2.4~6.3.2.6, 6.3.2.8, 6.3.1, 6.4.7,.2014 edition)
6.4.3, 6.4.4, 6.4.7);
h)
Added XPS board precast concrete sandwich insulation exterior wall panel system, XPS board floor insulation system, XPS board roof insulation system
Test method for XPS board (see 6.4 to 6.6);
i)
The factory inspection items and type inspection items have been changed (see 7.1.1, 7.2.1, 7.2.1,.2014 edition 7.2.1, 7.3.1); j)
Deleted the product certificate and instruction manual (see Chapter 8 of the.2014 edition); k)
Added logo and accompanying files (see Chapter 8); l)
The weather resistance test method and the glass fiber mesh alkali resistance rapid test method (see Appendix A and Appendix B of the.2014 edition) have been deleted; m)
Added the XPS board compression deformation test method (see Appendix A).
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed by the Ministry of Housing and Urban-Rural Development of the People's Republic of China.
This document is under the jurisdiction of the National Technical Committee for Standardization of Building Components (SAC/TC 454).
This document was drafted by. Shanghai Jianke Group Co., Ltd., China Architecture Standard Design Institute Co., Ltd., Changshu Jiangnan Glass
Fiber Co., Ltd., Guangzhou Fuda Thermal Insulation Materials Co., Ltd., Zhejiang Dingfeng Technology Co., Ltd., Huyu Building Technology (Shanghai)
Co., Ltd., Shanghai Shengkui Plastics Co., Ltd., Suzhou Liangpu Energy Saving New Materials Co., Ltd., Shanghai Academy of Building Sciences Co., Ltd.
Co., Ltd., Liaoning Provincial Inspection and Certification Center, Nanjing Fiberglass Research and Design Institute Co., Ltd., China Plastics Processing Industry Association Polystyrene Extrusion
Foam Board Professional Committee, Shanghai Jianke Inspection Co., Ltd., Construction Research Institute Testing Center Co., Ltd., Shanghai Farelli New Building Materials Group
Co., Ltd., Xinzheng Zhongyuan Foam Material Co., Ltd., Owens Corning (China) Investment Co., Ltd., Beipeng Building Materials Group Co., Ltd.
Company, Jiangxi Huayuan New Materials Co., Ltd., Taishan Fiberglass Co., Ltd., Shenzhen Jiaxin Construction Group Co., Ltd., Shandong Ou
Kes Green Energy-saving Building Materials Co., Ltd., Komeis New Materials Technology Development Co., Ltd., Shanghai Lvyu Energy-saving Technology Co., Ltd., Jiangyin Hengtai
Energy Saving Technology Co., Ltd., Shenyang Minghuida Insulation Building Materials Co., Ltd., and Jiangsu Teweiers New Materials Co., Ltd.
The main drafters of this document are. Fan Jun, Chen Ning, Li Xiaoming, Wang Juan, Ye Beihong, Zhao Liqun, Yu Linfeng, Wang Qiong, Wang Xiong,
Long Tianyan, Zhang Zhigang, Xiong Shaobo, Yuan Linlin, Jiao Hongwen, Cui Jun, Li Xingwei, Zhang Yinan, Guo Jing, Hua Zhiguo, Zhan Zaoliang, Zhang Di,
Chen Faqing, Liu Bingqiang, Zhu Huanjie, Yang Kai, Bai Bingjie, Shen Yin, Liu Kangning, Liu Chunming, Xin Deguo, Liu Shenghua, Liu Congying,
Qiushuang Lou, Shu Zheng, Weida Chen, Yanqing Lu, Hong Zhao, Jiachen Liu.
This document was first published in.2014 and this is the first revision.
Extruded polystyrene board (XPS) for building insulation
System Materials
1 Scope
This document specifies the general requirements, technical requirements, inspection rules, marking and
Accompanying documents, packaging, transportation and storage, describe the corresponding test methods.
This document is applicable to thin plaster exterior wall insulation system materials with extruded polystyrene board as insulation material, precast concrete sandwich insulation exterior wall
Production and application of board system materials, floor insulation system materials, and roof insulation system materials.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies.
in this document.
GB/T 2406.2 Determination of combustion behavior of plastics by oxygen index method Part 2.Room temperature test
GB/T 2918-2018 Standard environment for conditioning and testing of plastic specimens
GB/T 4100 Ceramic tiles
GB/T 6342 Determination of linear dimensions of foam plastics and rubber
GB/T 7689.5 Test methods for woven fabrics of reinforced materials Part 5.Determination of tensile strength and elongation at break of glass fibers
GB/T 8170 Rules for rounding off values and expression and determination of limit values
GB 8624 Classification of combustion performance of building materials and products
GB/T 8810 Determination of water absorption of rigid cellular plastics
GB/T 8811 Test method for dimensional stability of rigid cellular plastics
GB/T 8812.1 Determination of flexural properties of rigid cellular plastics Part 1.Basic bending test
GB/T 8813 Determination of compression properties of rigid cellular plastics
GB/T 9267 Determination of white point temperature and minimum film-forming temperature of emulsions and coatings for coatings and polymer dispersions for plastics
GB/T 9914.3 Test methods for reinforced products Part 3.Determination of mass per unit area
GB/T 10294 Determination of steady-state thermal resistance and related properties of thermal insulation materials - Guarded hot plate method
GB/T 10295 Determination of steady-state thermal resistance and related properties of thermal insulation materials - Heat flow meter method
GB 12952 Polyvinyl chloride (PVC) waterproofing membrane
GB/T 15036.1 Solid wood flooring Part 1.Technical requirements
GB/T 17146 Test method for water vapor transmission performance of building materials and their products
GB/T 17671 Test method for strength of cement mortar (ISO method)
GB/T 18173.1 Polymer waterproof materials Part 1.Sheet materials
GB 18242 Elastomer modified bitumen waterproofing membrane
GB 18243 Plastic modified asphalt waterproofing membrane
GB/T 19250 Polyurethane waterproof coating
GB/T 19766 Natural marble building panels
GB/T 20102 Test method for alkali resistance of glass fiber mesh cloth - Sodium hydroxide solution immersion method
GB/T 20623 Emulsions for architectural coatings
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 30595-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 30595-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 30595-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30595-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 30595-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 30595-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|