|
US$459.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3028-2012: Marine electric signal lights
Status: Valid GB/T 3028: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 3028-2012 | English | 459 |
Add to Cart
|
4 days [Need to translate]
|
Marine electric signal lights
| Valid |
GB/T 3028-2012
|
| GB/T 3028-1995 | English | 519 |
Add to Cart
|
4 days [Need to translate]
|
Technical requirements for marine electric signal lights
| Obsolete |
GB/T 3028-1995
|
| GB 3028-1982 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Technical requirements for marine electric signal lights
| Obsolete |
GB 3028-1982
|
Standard similar to GB/T 3028-2012 GB/T 3027 GB/T 24954 GB/T 24950 Basic data | Standard ID | GB/T 3028-2012 (GB/T3028-2012) | | Description (Translated English) | Marine electric signal lights | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | U63 | | Classification of International Standard | 47.020.60 | | Word Count Estimation | 20,232 | | Older Standard (superseded by this standard) | GB/T 3028-1995 | | Quoted Standard | GB/T 2423.1-2008; GB/T 2423.2-2008; GB/T 2423.4-2008; GB/T 2423.10-2008; GB/T 2423.16-2008; GB/T 2423.18-2008; GB 4208-2008; GB 7000.1-2007; GB/T 7922-2008; GB 17743-2007; GB 17935; GB 17936; GB 19651.3; GB/T 24823; CB/T 338-2008; QB/T 2056; "1972 of the | | Regulation (derived from) | National Standards Bulletin No. 13 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the marine electric lights (hereinafter referred to as lights) requirements, test methods, inspection rules, labeling, packaging and storage. This standard applies to the following supply voltage 250 V AC (50 Hz or 60 Hz) and DC wi | GB/T 3028-2012: Marine electric signal lights---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Marine electric signal lights
ICS 47.020.60
U63
National Standards of People's Republic of China
Replacing GB/T 3028-1995
Marine electrical lights
Issued on. 2012-06-29
2012-11-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Requirements 1
Test Method 4 9
15 5 Inspection Rules
6 logo, packaging and storage 16
References 17
1 lights chromaticity coordinates regional boundaries illustrated in Figure 7
Figure 2 starboard light (green) beam profile 8
Figure 3 masthead light beam profile 8
4 lights and stern towing light beam profile 9
Table 1 Insulation Resistance 5
Table 2 creepage distances and clearances 5
Table 3 lights main technical parameters of optical 6
Table 4 lights chromaticity coordinates 6 regional boundaries
Table 5 lights and luminous intensity visibility distance table 7
Table 6 Vibration test parameters 11
Table 7 Power fluctuation range 12
Table 8 Insulation resistance test voltage 12
Table 9 Electric strength test voltage 13
Table 10 Type of lights and factory inspection items, the order and number of samples 15
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard replaces GB/T 3028-1995 "marine electrical lights technical conditions", the main technical content compared with the GB/T 3028-1995
Changes are as follows.
--- The name of "marine electrical lights technical conditions" to "marine electrical lights";
--- Modify the standard reference;
--- Added "type, parameters and main dimensions" requirement (see 3.1);
--- Modify the "structure" requirement (see 3.2,1995 version 3.4);
--- Modify the "source" requirement, increase the LED light source requirements (see 3.2.3,1995 version 3.5);
--- Modify the "lamp holder" requirement, increase the LED lamp holder requirements (see 3.2.4,1995 version 3.5);
--- Added "Terminals" requirement (see 3.2.5);
--- Modify the "wiring" requirement (see 3.2.6,1995 version 3.6);
--- Added "endurance test and thermal test" requirements and test methods (see 3.7);
--- Increased "heat, fire and the resistance to tracking test" requirements and test methods (see 3.8);
--- Modify the "power fluctuations" requirements and test methods (see 3.14,1995 version 3.7.1);
--- Increased use of LED lights light electromagnetic compatibility requirements and test methods (see 3.18);
--- The enclosure protection rating IP55 by the modification of IP56 (see 3.19,1995 version 3.4.6);
--- Increasing the inner glow of lights at a predetermined angle, the minimum luminous arcs angle visibility distance and used to achieve the desired strength
Luminous uniformity of requirements within the same time provides the lights off in the value of the light emitting angle at the boundary of the requirements (see 3.20).
Please note that some content of this document may involve patents, the issuing authority of this document does not assume responsibility for the identification of these patents.
The standard proposed by China State Shipbuilding Corporation.
This standard by the National Standardization Technical Committee Marine Boats (SAC/TC12) centralized.
This standard was drafted. Technical and Economic Research Institute of China Shipbuilding Industry, Marine Electric Co., Ltd. in Dalian.
The main drafters of this standard. Yuan Kang, Ji Dianxiu, Wang Zezhong, Mating Fu.
This standard replaces the standards previously issued as follows.
--- GB/T 3028-1982, GB/T 3028-1995.
Marine electrical lights
1 Scope
This standard specifies the marine electric lights (hereinafter referred to as lights) requirements, test methods, inspection rules, labeling, packaging and storage.
This standard applies to AC (50Hz or 60Hz) or less at 250V DC power supply voltage and types of ships sailing with the lights (for
Including sidelights, masthead light, stern lights, towing lights, round lights) design, production and acceptance.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold
GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat
GB/T 2423.4-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Db. Damp heat (12h
12h cycle)
GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal)
GB/T 2423.16-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test J and guidance. Mould growth
GB/T 2423.18-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Kb. Salt mist, cyclic (chloride
Sodium)
GB 4208-2008 shell protection (IP code)
GB 7000.1-2007 Luminaires - Part 1. General requirements and tests
GB/T 7922-2008 lighting color measurement method
Limits and test methods GB 17743-2007 radio disturbance characteristics of electrical lighting and similar equipment
GB 17935 screw lampholders
GB 17936 Cartridges bayonet
GB 19651.3 Miscellaneous lampholders - Part 2-2. LED module with special requirements connector
GB/T 24823 LED modules for general lighting - Performance requirements
CB/T 338-2008 marine electrical lights type, parameters and main dimensions
QB/T 2056 Marine Tungsten
"1972 International Regulations for Preventing Collisions at sea," the International Maritime Organization and its amendments
3 Requirements
3.1 Types, parameters and main dimensions
Types of lights, main parameters and dimensions shall comply with CB/T 338-2008 requirements of.
3.2 Structure
3.2.1 General requirements
General requirements for the structure of lights shall comply with the provisions of Chapter 4 GB 7000.1-2007.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3028-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 3028-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 3028-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3028-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 3028-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3028-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|