HOME   Cart(1)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 273.2-2018 English PDF

US$344.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 273.2-2018: Rolling bearings -- Boundary dimensions, general plan -- Part 2: Thrust bearings
Status: Valid

GB/T 273.2: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 273.2-2018English344 Add to Cart 3 days [Need to translate] Rolling bearings -- Boundary dimensions, general plan -- Part 2: Thrust bearings Valid GB/T 273.2-2018
GB/T 273.2-2006English639 Add to Cart 4 days [Need to translate] Rolling bearings -- Thrust bearings -- Boundary dimensions, general plan Obsolete GB/T 273.2-2006
GB/T 273.2-1998English639 Add to Cart 5 days [Need to translate] Rolling bearings--Thrust bearings--Boundary dimensions, general plan Obsolete GB/T 273.2-1998
GB 273.2-1987EnglishRFQ ASK 3 days [Need to translate] Rolling bearings--Thrust bearings--Plan of boundary dimensions Obsolete GB 273.2-1987

PDF similar to GB/T 273.2-2018


Standard similar to GB/T 273.2-2018

GB/T 274   GB/T 273.1   GB/T 273.3   GB/T 292   

Basic data

Standard ID GB/T 273.2-2018 (GB/T273.2-2018)
Description (Translated English) Rolling bearings -- Boundary dimensions, general plan -- Part 2: Thrust bearings
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J11
Classification of International Standard 21.100.20
Word Count Estimation 18,168
Date of Issue 2018-07-13
Date of Implementation 2019-05-01
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 273.2-2018: Rolling bearings -- Boundary dimensions, general plan -- Part 2: Thrust bearings

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rolling bearings--Boundary dimensions, general plan--Part 2. Thrust bearings ICS 21.100.20 J11 National Standards of People's Republic of China Replace GB/T 273.2-2006 Rolling bearing dimensions overall plan Part 2. Thrust bearings Rolingbearings-Boundarydimensions, generalplan-Part 2. Thrustbearings (ISO 104.2015, Rollingbearings-Thrustbearings- Boundarydimensions, generalplan, IDT) Published on.2018-07-13 2019-05-01 implementation State market supervision and administration China National Standardization Administration issued

Foreword

GB/T 273 "Rolling bearing dimensions overall plan" is divided into three parts. ---Part 1. Tapered roller bearings; ---Part 2. Thrust bearings; --- Part 3. Radial bearings. This part is the second part of GB/T 273. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part replaces GB/T 273.2-2006 "General plan for the dimensions of rolling bearing thrust bearings", and GB/T 273.2-2006 In contrast to the editorial changes, the main technical changes are as follows. --- Added the definition of one-way flat-bottom thrust bearing, two-way flat-bottom thrust bearing and central shaft ring (see Chapter 3); --- Modified the definition of some symbols (see Chapter 4, Chapter 4 of the.2006 edition); --- Adjusted the position of Figure 1 and Figure 2 in the standard (see Chapter 4, 5.2 and 5.3 of the.2006 edition); --- Removed the provisions for chamfering contours (see 5.1 of the.2006 edition); --- Added a description of the unit of measurement for each of the formulas (A.1) and (A.2) (see A.3, A.4). This part uses the translation method equivalent to ISO 104.2015 "Rolling bearing thrust bearing size overall plan". The documents of our country that have a consistent correspondence with the international documents referenced in this part are as follows. ---GB/T 274-2000 Rolling bearing chamfer size maximum (idtISO 582.1995) ---GB/T 6930-2002 Rolling Bearing Vocabulary (ISO 5593.1997, IDT) ---GB/T 7811-2015 Rolling bearing parameter symbol (ISO 15241.2012, IDT) This section also made the following editorial changes. --- Revised the standard name, the standard name was changed to "Rolling bearing dimensions overall plan part 2. thrust bearing". This part was proposed by the China Machinery Industry Federation. This part is under the jurisdiction of the National Rolling Bearing Standardization Technical Committee (SAC/TC98). This section drafted by. Luoyang Bearing Research Institute Co., Ltd., Zhangzhou Meiya Special Bearing Factory, Hefei Jinchang Bearing Co., Ltd., Zhejiang High-speed Rail Bearing Co., Ltd., Shandong Jinna Machinery Engineering Technology Co., Ltd. The main drafters of this section. Zhang Bowen, Zhou Youhua, Yu Yuwen, Zeng Xianzhi, Qiang Qiang, Yan Xiu Lei. The previous versions of the standards replaced by this section are. ---GB/T 273.2-1964, GB/T 273.2-1981, GB/T 273.2-1987, GB/T 273.2-1998, GB/T 273.2-2006. Rolling bearing dimensions overall plan Part 2. Thrust bearings

1 Scope

This part of GB/T 273 specifies the preferred dimensions of one-way and two-way flat-bottom thrust bearings. In addition, this section also specifies the minimum inner diameter of the race and the maximum outer diameter of the collar for the size series of 11, 12, 13, 14, 22, 23 and 24 bearings. size. This section also specifies the extension rules for the overall dimensions of the one-way thrust bearing dimensions, see Appendix A. Note. For the dimensions of the self-aligning thrust bearing (non-flat bottom) and the aligning seat washer, see ISO 20516 [2].

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. ISO 582 rolling bearing chamfer size maximum (Rolingbearings-Chamferdimensions-Maximumval- Ues) ISO 5593 Rolling Bearing Vocabulary (Rolingbearings-Vocabulary) ISO 15241 rolling bearing parameter symbols (Rolingbearings-Symbolsforphysicalquantities)

3 Terms and definitions

The following terms and definitions defined by ISO 5593 apply to this document. 3.1 One-way flat-bottom thrust bearing single-directionthrustbearingwithflatbackfaces It is only used for flat-bottomed thrust bearings that can withstand axial loads in one direction. 3.2 Two-way flat-bottom thrust bearing double-directionthrustbearingwithflatbackfaces Flat-bottomed thrust bearing for axial loads in both directions. 3.3 Central shaft centralshaftwasher The middle ring mounted on the shaft. [ISO 20516.2007, definition 3.5]

4 symbol

The symbols given in ISO 15241 and the following symbols apply to this document. Unless otherwise indicated, the symbols shown in Figures 1 and 2 and the values shown in Tables 1 through 9 all indicate nominal dimensions. B. the height of the middle ring D. outer diameter of the seat D1. inner diameter of the seat D1smin. the smallest single inner diameter of the seat d. one-way flat-bottom thrust bearing shaft inner diameter D1. one-way flat-bottom thrust bearing shaft outer diameter D1smax. the largest single outer diameter of the shaft D2. inner diameter of the shaft in the two-way flat-bottom thrust bearing D3. outer diameter of the shaft ring of the two-way flat-bottom thrust bearing D3smax. the largest single outer diameter of the central shaft r. shaft ring and seat back chamfer size Rsmin. minimum single chamfer size on the back of the collar and race R1. middle shaft ring end chamfer size R1smin. minimum single chamfer size for the end face of the shaft collar T. one-way flat-bottom thrust bearing height T1. two-way flat-bottom thrust bearing height Fig.1 One-way flat-bottom thrust bearingFig.2 Two-way flat-bottom thrust bearing

5 dimensions

5.1 General The maximum single chamfer size corresponding to rsmin in Tables 1 to 9 and r1smin in Tables 7 to 9 is specified in ISO 582. The chamfer dimensions r and r1 apply only to the chamfers indicated in Figures 1 and 2, and the other chamfers are not sized, but should not be acute. 5.2 one-way flat bottom thrust bearing The dimensions of the one-way flat-bottom thrust bearing are shown in Tables 1 to 6. Table 1 One-way thrust bearing---diameter series 0 unit is mm d D rsmin Size series d D rsmin Size series 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 1.1 1.1 1.1 1.1 1.5 1.5 1.5 1.5 1.5 2.1 2.1 2.1 2.1 Table 2 One-way thrust bearing---diameter series 1 unit is mm d D rsmin Size series T d1smax D1smin d D rsmin Size series T d1smax D1smin 0.3 0.3 0.3 0.3 0.3 0.6 0.6 0.6 0.6 0.6 0.6 0.6 1.1 1.1 1.1 1.1 1.1 1.5 1.5 1.5 2.1 2.1 2.1 2.1 7.5 7.5 7.5 7.5 7.5 9.5 9.5 9.5 Table 3 One-way thrust bearing---diameter series 2 units in millimeters d D rsmin Size series T d1smax D1smin d D rsmin Size series T d1smax D1smin 0.3 0.3 0.3 0.6 0.6 0.6 0.6 0.6 0.6 0.6 1.1 1.1 1.1 1.1 1.5 1.5 1.5 1.5 1.5 1.5 2.1 2.1 2.1 7.5 7.5 7.5 7.5 9.5 9.5 9.5 9.5 9.5 9.5 Table 4 One-way thrust bearing---diameter series 3 units in millimeters d D rsmin Size series T d1smax D1smin d D rsmin Size series T d1smax D1smin 0.6 0.6 0.6 0.6 0.6 0.6 0.6 1.1 1.1 1.1 1.1 1.1 1.5 1.5 1.5 1.5 1.5 2.1 2.1 2.1 2.1 7.5 7.5 7.5 9.5 9.5 9.5 9.5 9.5 Table 5 One-way thrust bearing---diameter series 4 units in millimeters d D rsmin Size series T d1smax D1smin d D rsmin Size series T d1smax D1smin 1.1 1.1 1.1 1.5 1.5 1.5 2.1 2.1 2.1 7.5 7.5 7.5 7.5 7.5 7.5 9.5 9.5 9.5 9.5 9.5 Table 6 One-way thrust bearing---diameter series 5 units in millimeters d D rsmin Size series d D rsmin Size series 1.1 1.1 1.1 1.5 2.1 2.1 2.1 7.5 7.5 7.5 9.5 9.5 9.5 9.5 5.3 two-way flat bottom thrust bearing The dimensions of the two-way flat-bottom thrust bearing are shown in Tables 7 to 9. Table 7 Two-way thrust bearing---diameter series 2---size series 22 units in millimeters D2 da D rsmin r1smin T1 B d3smax D1smin 0.6 0.6 0.6 0.6 1.1 1.1 1.1 1.1 1.5 1.5 1.5 1.5 1.5 1.5 0.3 0.3 0.3 0.3 0.3 0.6 0.6 0.6 0.6 0.6 0.6 1.1 1.1 1.1 1.1 1.1 1.1 189.5 199.5 214.5 224.5 239.5 Ad is the inner diameter of the collar of the corresponding diameter series 2 one-way bearing in Table 3. Table 8 Bidirectional Thrust Bearings---Diameter Series 3---Series Series 23 Units in millimeters D2 da D rsmin r1smin T1 B d3smax D1smin 1.1 1.1 1.1 1.1 1.1 1.5 1.5 1.5 1.5 1.5 2.1 2.1 2.1 2.1 0.3 0.3 0.3 0.6 0.6 0.6 0.6 0.6 0.6 1.1 1.1 1.1 1.1 1.1 1.1 189.5 209.5 Ad is the inner diameter of the collar of the corresponding diameter series 3 one-way bearing in Table 4. Table 9 Directional thrust bearing---diameter series 4---size series 24 units in millimeters D2 da D rsmin r1smin T1 B d3smax D1smin 1.1 1.1 1.1 0.6 0.6 0.6 0.6 0.6 1.5 1.5 1.5 2.1 2.1 2.1 0.6 0.6 0.6 1.1 1.1 1.1 1.1 1.5 2.1 179.5 189.5 209.5 Ad is the inner diameter of the collar of the corresponding diameter series 4 one-way bearing in Table 5.

Appendix A

(informative appendix) Extension rules for the overall plan size of one-way thrust bearings A.1 General For any new dimensions not specified in this section, the following rules should be followed. However, the formula for calculating the outer diameter and height values It should not be used as the sole basis for finalizing the form factor value. In order to maintain the continuity of this part, to obtain the appropriate bearing ratio and adoption Priority size, the calculated dimensions should be properly corrected. Therefore, any new size should be recognized by the National Rolling Bearing Standardization Technical Committee. A.2 inner diameter The inner diameter d of the collar larger than 500 mm should be selected from the R40 priority number system of ISO 3 [1]. The inner diameter of the collar that has appeared in this section should be preferred. A.3 outer diameter The outer diameter of the seat circle D is calculated according to formula (A.1). D =d fDd0.8 (A.1) In the formula. D --- the number of millimeters of the outer diameter of the seat, in millimeters (mm); d --- the number of millimeters of the inner diameter of the collar, in millimeters (mm); fD --- coefficient, the value of which is selected according to Table A.1. Table A.1 fD values Diameter series 0 1 2 3 4 5 fD 0.36 0.72 1.2 1.84 2.68 3.8 The outer diameter of the race that has appeared in this section should be preferred. The new outer diameter dimensions shall be rounded in accordance with Table A.2. Table A.2 The rounding unit of D is mm > ≤ Round to the nearest value 0.5 A.4 bearing height The bearing height T is calculated according to formula (A.2) and its unit is mm. T=fT Dd (A.2) In the formula. D --- the number of millimeters of the outer diameter of the seat, in millimeters (mm); d --- the number of millimeters of the inner diameter of the collar, in millimeters (mm); fT --- coefficient, the value is selected according to Table A.3. Table A.3 fT values Height series 7 9 1 fT 0.9 1.2 1.6 The new height dimensions should be rounded according to Table A.4. Table A.4 The rounding unit of T is mm > ≤ Round to the nearest value 0.1 0.5 A.5 minimum single chamfer size The minimum single chamfer size rsmin should be selected from the rsmin values listed in ISO 582. In principle, the value is closest to but not greater than the bearing. 7% of height T and section width D-d2 The smaller of the 7% of the two values. references [1] ISO 3 Preferrednumbers-Seriesofpreferrednumbers [2] ISO 20516 Rolingbearings-Aligningthrustbalbearingsandaligningseatwashers- Boundarydimensions

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 273.2-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 273.2-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 273.2-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 273.2-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 273.2-2018?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 273.2-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.