|
US$394.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 27028-2008: Conformity assessment -- Guidance on a third-party certification system for products
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 27028-2008 | English | 394 |
Add to Cart
|
3 days [Need to translate]
|
Conformity assessment -- Guidance on a third-party certification system for products
| Valid |
GB/T 27028-2008
|
PDF similar to GB/T 27028-2008
Basic data | Standard ID | GB/T 27028-2008 (GB/T27028-2008) | | Description (Translated English) | Conformity assessment -- Guidance on a third-party certification system for products | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A00 | | Classification of International Standard | 03.120.20 | | Word Count Estimation | 20,214 | | Date of Issue | 2008-05-12 | | Date of Implementation | 2008-12-01 | | Quoted Standard | GB/T 27000-2006; GB/T 27065-2004 | | Adopted Standard | ISOIEC Guide 28-2004, IDT | | Regulation (derived from) | Announcement of Newly Approved National Standards 2008 No. 8 (No. 121 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the classification of fountain pen, requirements, test methods, inspection rules, marking, packaging, transportation and storage. This standard applies to devices with writing ink sump and the point of the metal nib with iridium grain, apply the principle of capillary fountain pen writing. | GB/T 27028-2008: Conformity assessment -- Guidance on a third-party certification system for products
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Conformity assessment. Guidance on a third-party certification system for products
ICS 03.120.20
A00
National Standards of People's Republic of China
Conformity Assessment
Third-party product certification system Application Guide
(ISO /IEC Guide28.2004, IDT)
Posted 2008-05-12
2008-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
Introduction Ⅱ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 1 Certification Application
Initial Review 5 1
5.1 Overview 1
5.2 Review of production processes and the quality system 2
5.3 2 Initial Detection
6 Evaluation (Review) 2
Decision 7 2
8 License 2
Expand the scope of certification 2 9
10 Supervision 3
Use 11 or Certificate of Conformity mark 3
11.1 Compliance certificates or marks of conformity 3
11.2 mark 3
12 is public information Licensee 3
13 Confidentiality 3
14 certificate of conformity or conformity marking misuse of 4
15 product licenses suspended 4
16 4 revoked
17 pairs revised standard implementation 5
5 18 Liability
19 complaints 5
20 cost 5
Appendix A (informative) Certification Listing Rules Example 6
Annex B (informative) Example of product certification application 7
Annex C (informative) factory assessment survey indicates Example 8
Annex D (informative) Certificate of Conformity Example 11
Appendix E (normative) Use Conformity mark license agreement or example 12
Format examples license Appendix F (informative) using the certificate of conformity or mark of 14
References 15
Foreword
This standard is identical with ISO /IEC Guide 28.2004 "Conformity assessment third-party product certification system Application Guide" (second edition).
The Standard Appendix A, Appendix B, Appendix C, Appendix D, Annex E and Annex F is informative appendix.
This standard is recognized by the National Standardization Technical Committee and centralized authentication.
This standard was drafted. China Quality Certification Center, the National Certification and Accreditation Regulatory Commission, China Electric Apparatus Research Institute, Shenzhen electricity
Sub product quality inspection center, China National Accreditation Board for Conformity Assessment, Quality Mark Certification Group, Guangzhou CVC Testing Institute,
Beijing Certification Center, China Electronics Standardization Institute.
The main drafters of this standard. Lu Mei, Jiang Wenbo, Zhao Jiarui, Zhang
, Caoya Bin, Chen Xin, Wang Xiaodong, Wu Guoping, Wang Keqin, Wu Xiaolong,
Liu Xiaohong, Zhao Zhiwei, Fu Die, Zhou Yulin, Liu Yanbin, Zhang Qin Haiyan.
Introduction
This standard provides a format that works third-party product certification system, but does not exclude the presence of other available third-party conformity assessment system mode
formula. The actual existence of many possible applications, system type, depending on the product categories that require authentication.
As a typical third-party product certification system, the equivalent of the standard adopted by ISO /IEC Guide 28.2004 has been widely should
And approved by, the 2004 revision further established the typical third-party product certification system as an authoritative and reliable
Status of product certification system model.
Conformity Assessment
Third-party product certification system Application Guide
1 Scope
This standard is a general guide for a particular product certification system.
This standard applies to initial detection of the product by the sample, the relevant quality system accreditation and supervision as well as from the factory and by
(Or) to obtain product samples for testing market supervision and to determine the third-party product certification system to meet specific product requirements. The standard
Quasi also proposed the use of marks of conformity conditions and the conditions for granting a certificate of conformity.
The system corresponds to GB/T 27067-2006 product certification system described in 5.
Appendix A gives a typical third-party certification system authentication rule list of contents.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 27000-2006 Conformity assessment - Vocabulary and general principles (ISO /IEC 17000.2004, IDT)
GB/T 27065-2004 General requirements for product certification bodies (ISO /IEC Guide65.1996, IDT)
3 Terms and Definitions
Terms and definitions GB/T 27000-2006 established applicable to this standard.
4 Certification Application
Application for certification requires certification agencies dedicated form. Appendix B gives these forms of style.
Applicants should clearly apply for accreditation of a particular product or product group, and these particular product or product group in the product certification shall be square
Case determined.
Upon receipt of the completed application form and a security deposit, if desired, to provide an initial evaluation of the certification body is expected to complete the desired product to the applicant
The time and the further information required to accept the application.
5 Initial Review
5.1 Overview
In order to implement this model product certification system, the certification body shall comply with GB/T 27065-2004 requirements of.
After confirming accepting applications, certification bodies shall be in accordance with product certification scheme for the applicant to make the necessary arrangements for an initial assessment.
The certification body of all the activities included in a specific authentication scheme responsible for these activities, including sampling, testing, production process or quality system
Review and supervision of certified products. Certification agencies in accordance with product certification scheme could accept the results of conformity assessment.
The certification body shall review the results of the initial testing and notify the applicant.
If the certification body determined the certification requirements have not been fully met, we shall not meet the requirements of the terms of the notification to the applicant.
If the applicant can demonstrate within the time limit prescribed corrective measures have been taken, and meet all the requirements, the certification body should only weighs
Complex essential part of the initial evaluation and testing.
Certification authority under the spending limit under circumstances, you may need to submit a new application or increase its spending limit in the application process.
Subsequent submission for the same product may not necessarily be repeated review.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 27028-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 27028-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 27028-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 27028-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|