|
US$139.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26099.1-2010: General principles of three-dimensional modeling for mechanical products -- Part 1: General requirements
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 26099.1-2010 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
General principles of three-dimensional modeling for mechanical products -- Part 1: General requirements
| Valid |
GB/T 26099.1-2010
|
PDF similar to GB/T 26099.1-2010
Basic data | Standard ID | GB/T 26099.1-2010 (GB/T26099.1-2010) | | Description (Translated English) | General principles of three-dimensional modeling for mechanical products -- Part 1: General requirements | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Classification of International Standard | 01.100.01 | | Word Count Estimation | 6,610 | | Date of Issue | 1/10/2011 | | Date of Implementation | 10/1/2011 | | Quoted Standard | GB/T 16722.1; GB/T 16722.2; GB/T 16722.3; GB/T 16722.4; GB/T 18784; GB/T 18784.2; GB/T 24734.1; GB/T 24734.2-2009 | | Regulation (derived from) | Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies the term three-dimensional modeling of mechanical products, model classification and composition, modeling General Requirements, nomenclature model file, model checking, and model management requirements. This Standard is applicable to construction, application and management of mechanical products dimensional modeling three-dimensional digital model of the process. | GB/T 26099.1-2010: General principles of three-dimensional modeling for mechanical products -- Part 1: General requirements
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General principles of three-dimensional modeling for mechanical products Part 1. General requirements
ICS 01.100.01
J04
National Standards of People's Republic of China
General rules for three-dimensional modeling of mechanical products
Part 1. General requirements
Part 1. Generalrequirements
Issued on. 2011-01-10
2011-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 26099-2010 "General rules for three-dimensional modeling of mechanical products" is divided into four parts.
--- Part 1. General requirements;
--- Part 2. part modeling;
--- Part 3. assembly modeling;
--- Part 4. The model projection drawing.
This section GB/T 26099-2010 Part 1 "General rules for three-dimensional modeling of mechanical products," the.
This part of the National Technical product documentation Standardization Technical Committee (SAC/TC146) and focal points.
This part mainly drafted by. The machine Productivity Promotion Center, Beijing-soft Intentia Information Technology Co., Ltd., China Electronics Technology Group
Thirty-eighth Company Institute, Guangxi Yuchai Machinery Co., Ltd., SAIC-GM-Wuling Automobile Co., Ltd., Guangxi Liugong Machinery Unit
Limited copies.
The main drafters of this section. Zhang Hongqi, sea Yong Jun, Xiao Chengxiang, Wang Lu, Hanlin Lin, Chen Weidong, Liu seized Hua Yan Guangrong, Wenqiu Sheng,
He Dandan, Zhang Yan, Lin JR, Lidai Song, Liu Jing.
General rules for three-dimensional modeling of mechanical products
Part 1. General requirements
1 Scope
This section GB/T 26099 specifies the term three-dimensional modeling of mechanical products, classification and constitute a model, modeling general requirements, the model file
Nomenclature, model checking and model management requirements.
This section applies to build three-dimensional mechanical product modeling process three-dimensional digital model, application and management.
2 Normative references
The following documents contain provisions which, through reference GB/T 26099 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 16722.1 Technical product documentation computer-aided technical information - Security requirements (GB/T 16722.1-2008,
ISO 11442.2006, NEQ)
GB/T 16722.2 Technical product documentation computer-aided technical information - Original documentation (GB/T 16722.2-2008,
ISO 11442.2006, NEQ)
GB/T 16722.3 Technical product documentation - computer-aided information processing technology product design process state
(GB/T 16722.3-2008, ISO 11442.2006, NEQ)
GB/T 16722.4 Technical product documentation computer-aided technical information - Document management and retrieval system
(GB/T 16722.4-2008, ISO 11442.2006, NEQ)
GB/T 18784 CAD/CAM data quality
GB/T 18784.2 CAD/CAM data quality assurance methods
GB/T 24734.1 Technical product documentation - Digital product definition data practices - Part 1. Terms and definitions
(GB/T 24734.1-2009, ISO 16792.2006, NEQ)
GB/T 24734.2-2009 Technical product documentation - Digital product definition data practices - Part 2. Data set identification and control
(ISO 16792.2006, NEQ)
3 Terms and Definitions
GB/T 24734.1 and established the following terms and definitions apply to this section.
3.1
Feature feature
A collection of geometry or engineering information and the expression of certain features and semantics of a combination of engineering.
3.2
Entity solidbody
From the surface or edge forms a closed volume of the three-dimensional geometry.
3.3
Maturity maturedegree
The design is completed and the degree of perfection of quantitative description, its value ranges from 0 to 1.
|