HOME   Cart(1)   Quotation   About-Us Tax PDFs Standard-List
Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 189760 (24 Sep 2022)

GB/T 244-2020 (GBT 244-2020)

Chinese standards (related to): 'GB/T 244-2020'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)See DetailStatusGoogle Book
GB/T 244-2020English95 Add to Cart 0--3 minutes. Auto immediate delivery. Metallic materials--Tube--Bend test method GB/T 244-2020 Valid GBT 244-2020
GB/T 244-2008English239 Add to Cart 3 days Metallic materials -- Tube -- Bend test GB/T 244-2008 Obsolete GBT 244-2008
GB/T 244-1997English199 Add to Cart 2 days Metallic materials--Tube--Bend test GB/T 244-1997 Obsolete GBT 244-1997
GB/T 244-1982English199 Add to Cart 2 days Method for bend test on tubes of metals GB/T 244-1982 Obsolete GBT 244-1982


   
BASIC DATA
Standard ID GB/T 244-2020 (GB/T244-2020)
Description (Translated English) Metallic materials--Tube--Bend test method
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard H23
Classification of International Standard 77.040.10
Word Count Estimation 10,134
Date of Issue 2020-06-02
Date of Implementation 2020-12-01
Drafting Organization Zhejiang Jinzhou Pipeline Technology Co., Ltd., Changshu Customs of the People's Republic of China, Zhejiang Special Equipment Research Institute, National Steel and Product Quality Supervision and Inspection Center, Pabo Testing Technology Service Co., Ltd., Shenzhen Wantest Testing Equipment Co., Ltd., Metallurgical Industry Information Standards Institute
Administrative Organization National Steel Standardization Technical Committee (SAC/TC 183)
Proposing organization China Iron and Steel Association
Issuing agency(ies) State Administration for Market Regulation, National Standardization Administration


GB/T 244-2020: PDF in English (GBT 244-2020)
GB/T 244-2020
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.040.10
H 23
Replacing GB/T 244-2008
Metallic materials - Tube - Bend test method
[ISO 8491:1998, Metallic materials - Tube (in full section) - Bend test, MOD]
ISSUED ON: JUNE 02, 2020
IMPLEMENTED ON: DECEMBER 01, 2020
Issued by: State Administration for Market Regulation;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Symbols, names and units ... 5
3 Test principle ... 5
4 Test equipment ... 6
5 Test piece ... 6
6 Test procedure ... 6
7 Test report ... 7
Annex A (informative) Special tube bending testing machine and test method 8
Bibliography ... 11
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces GB/T 244-2008 “Metallic materials - Tube - Bend test”.
Compared with GB/T 244-2008, the main technical changes are as follows:
- MODIFY the description of the scope according to the national standard
compilation requirements (see Clause 1 of this Standard, Clause 1 of the
2008 edition);
- MODIFY the symbol of the wall thickness of the tube from “a” to “t”, and
MODIFY the note of the symbol of the wall thickness of the tube in Table 1
(see Table 1 and Figure 1 of this Standard, Table 1 and Figure 1 of the 2008
edition);
- MODIFY the “bending center” in the full text to “bending die”;
- ADD the content that test pieces with special requirements may be
subjected to bend test with reference to Annex A (see 4.3 of this Standard);
- MODIFY “tests required to be carried out under controlled conditions" to
"tests with strict temperature requirements" (see 6.1 of this Standard, 6.1
of the 2008 edition);
- MODIFY “welded tube” to “straight seam welded tube” [see 6.3 and 7e) of
this Standard, 6.3 and 7e) of the 2008 edition];
- ADD the content of the informative annex “Special tube bending testing
machine and test method” (see Annex A of this Standard).
This Standard uses the redrafting method to modify ISO 8491:1998 “Metallic
materials - Tube (in full section) - Bend test”.
There are technical differences between this Standard and ISO 8491:1998. The
clauses involved in these differences have been marked by a single vertical line
(|) on the outer margins. The specific technical differences and their reasons
are as follows:
- MODIFY the symbol of the wall thickness of the tube from “a” to “t”, to
harmonize with Chinese standards (see Table 1 of this Standard, Table 1 of
ISO 8491:1998);
- ADD the content that test pieces with special requirements may be
subjected to bend test with reference to Annex A, to meet China’s national
conditions (see 4.3 of this Standard);
Metallic materials - Tube - Bend test method
1 Scope
This Standard specifies the test principle, test equipment, test piece, test
procedure and test report of the bend test method for metallic tubes.
This Standard applies to the determination of the full-section bending plastic
deformation capacity of circular cross-section metallic tubes with an outer
diameter not greater than 65 mm. The outer diameter range of the applicable
metallic tubes of this Standard can be specified in more detail in the relevant
product standards.
NOTE: The bend test of the transverse strip test piece of metallic tubes is carried out according
to GB/T 232[1], to increase the original bending rate of the test piece.
2 Symbols, names and units
The symbols, names and units used in this Standard are shown in Table 1.
Table 1 -- Symbols, names and units
3 Test principle
A full-section metallic straight tube is bent around a bending die with a specified
radius and grooves until the bending angle reaches the value specified in the
relevant product standard (see Figure 1).
in close contact with the metallic tube bending die until the specified bending
angle is reached.
6.3 During the bend test of straight seam welded tubes, the position of the weld
seam relative to the bending plane shall meet the requirements of the relevant
product standards. If there are no specific requirements, the weld seam shall
be located at 90° to the bending plane (i.e., the neutral line of the bending).
6.4 It shall explain the results of the bend test according to the requirements of
the relevant product standards. When it is not specified in the product standard,
and if there is no visible crack without using a magnifying lens, it shall be
assessed as qualified.
7 Test report
The shall provide the test report according to the requirements of relevant
product standards. The test report shall contain at least the following content:
a) serial number of this Standard;
b) identification of the test piece;
c) dimension of the test piece;
d) bending angle α and bending die’s radius r;
e) the position of the weld seam relative to the bending plane, if it is a straight
seam welded tube;
f) test results.
......