Search result: GB/T 13813-2023 (GB/T 13813-2008 Older version)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 13813-2023 | English | 539 |
Add to Cart
|
5 days [Need to translate]
|
Testing method and judging rule of safety to friction spark of metallic material for coal mine
| Valid |
GB/T 13813-2023
|
| GB/T 13813-2008 | English | 679 |
Add to Cart
|
4 days [Need to translate]
|
Testing method and judging rule of safety to friction spark of metallic material for coal mine
| Obsolete |
GB/T 13813-2008
|
| GB/T 13813-2001 | English | 559 |
Add to Cart
|
4 days [Need to translate]
|
Testing method and judging rule of safety to friction spark of metallic material for coal mine
| Obsolete |
GB/T 13813-2001
|
| GB 13813-1992 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Testing method and judging rule of safety to friction spark of metallic material for coal mine
| Obsolete |
GB 13813-1992
|
| Standard ID | GB/T 13813-2023 (GB/T13813-2023) | | Description (Translated English) | Testing method and judging rule of safety to friction spark of metallic material for coal mine | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | D15 | | Classification of International Standard | 13.220.40 | | Word Count Estimation | 26,274 | | Date of Issue | 2023-05-23 | | Date of Implementation | 2023-12-01 | | Older Standard (superseded by this standard) | GB/T 13813-2008 | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Management Committee |
GB/T 13813-2023: Safety test methods and judgment rules for friction sparks of metal materials used in coal mines
ICS 13:220:40
CCSD15
National Standards of People's Republic of China
Replacing GB/T 13813-2008
Safety of Friction Sparks of Metal Materials Used in Coal Mine
Test Method and Judgment Rules
Released on 2023-05-23
2023-12-01 implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface I
1 Range 1
2 Normative references 1
3 Terms and Definitions 1
4 Flammable gas for testing 2
5 test equipment 2
6 Test environmental conditions 3
7 Test method 3
8 Judgment rule 11
9 Metal material friction spark safety test 11
10 Test result expression 15
11 Inspection requirements 16
Appendix A (Normative) Sample Pattern and Quantity 17
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents"
drafting:
This document replaces GB/T 13813-2008 "Metal Material Friction Spark Safety Test Methods and Judgment Rules for Coal Mine", and is in line with
Compared with GB/T 13813-2008, except for structural adjustment and editorial changes, the main technical changes are as follows:
--- Deleted the definition, formula, test piece pattern, etc: related to the impact flange (see 3:2, 3:4, A:1:3:1,:2008 edition
Figure A:7);
--- Increased the test equipment, inspection requirements and test piece pattern for the analysis of the chemical element composition of metal materials (see Table 2, 11:5, A:1:6,
Table A:1);
---Added the test equipment, test methods, judgment rules, metal material friction spark safety test, substitution and test of brake friction
Parts drawings (see Table 2, 7:5, 8:5, 9:6, 10:1, A:1:5, Table A:1);
--- Changed the scope of application of the friction spark safety test of the rotor (impeller) and casing (protection ring) paired metal materials (see 9:1:1,
8:1:1 of the:2008 edition);
---Deleted the "High-speed impact test conditions for light alloy lifting container materials" for the test equipment and scope requirements for projectile quality (see
Table 2, Table 3, Table 2, Table 3 of the:2008 edition);
---Changed the principle of substitution of friction spark safety test results for equipment, instruments, meters, tools and utensils using light alloy shells (see
10:1, 10:5:4 of the:2008 edition);
--- Changed the inspection requirements of the inspection unit, deleted the modification, replacement, revocation of the certificate, etc: (see 11:1~11:5,:2008 edition
10:1, 10:2, 10:4, 10:6, 10:7);
--- Changed the outer edge dimensions of the drop weight test piece (see Figure A:3, Figure A:3 of the:2008 edition):
Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed and managed by China Coal Industry Association:
This document was drafted by: China Coal Science and Industry Group Chongqing Research Institute Co:, Ltd:, Chongqing Anbiao Testing Research Institute Co:, Ltd:, Anbiao National Mine
Product Safety Mark Center Co:, Ltd:, Shanxi Anrui Fan Electric Co:, Ltd:, Wolong Electric Nanyang Explosion-proof Group Co:, Ltd:
Division, Shan'an Yun Fan Co:, Ltd:, Howden Hua Engineering Co:, Ltd:, Ping An Electric Co:, Ltd:
The main drafters of this document: Yang Liang, Ju Guanggang, Deng Peng, Kong Lingang, Shi Zhiyuan, Liu Yongliang, Zhou Zhipeng, Duanmu Fengqing, Wu Xuandong,
Li Jingzhe, Li Dajiang, Chen Zhongzhong, Yang Sen, Yan Wenxue, Qin Yubing, Peng Minghui, Cheng Bo, Wang Liangjiang, Yang Huayun, Li Shaohui, Wang Fanshu, Wang Wei,
Lian Bo, Li Pan:
This document was first released in:1992, revised for the first time in:2001, revised for the second time in:2008, and this is the third revision:
Safety of Friction Sparks of Metal Materials Used in Coal Mine
Test Method and Judgment Rules
1 Scope
This document specifies the test flammable gas, test equipment, and test environment conditions for the friction spark safety test of metal materials used in coal mines:
Parts, test methods, judgment rules, metal material friction spark safety test, test result expression, inspection requirements:
This document is applicable to the friction spark safety test of metal materials used in coal mines, and the friction spark test of other metal materials in similar explosive hazardous environments:
The rubbed spark safety test can be carried out with reference to this document:
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document:
GB/T 700 carbon structural steel
GB/T 1591 Low-alloy high-strength structural steel
3 Terms and Definitions
The following terms and definitions apply to this document:
3:1
light alloy lightaloy
The general term for alloys based on light metals such as aluminum, magnesium, and titanium with a density less than 4:5×103kg/m3:
3:2
In unit time, the outer edge of the rotating test piece slides over the arc length of the fixed test piece: Calculate according to formula (1):
v=
π·D·n
(1)
In the formula:
v --- rotational friction velocity, the unit is meter per second (m/s);
D --- the diameter of the outer edge of the rotating test piece, in meters (m);
n --- rotating speed of the test piece, the unit is revolution per minute (r/min):
3:3
The number of collisions between the rotating specimen and the fixed specimen: The rotating test piece and the fixed test piece are rubbed against each other continuously, and each time the arc length of 0:5m is slid
is one impact, calculated according to formula (2):
N=
2π·D·n·t
(2)
In the formula:
......
GB/T 13813-2008
Testing method and judging rule of safety to friction spark of metallic material for coal mine
ICS 13.220.40
D15
National Standards of People's Republic of China
Replacing GB/T 13813-2001
Coal mine safety to friction spark of metallic materials
Test methods and decision rules
Posted 2008-05-26
2008-11-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard replaces GB/T 13813-2001 "metal friction sparks coal mine safety testing methods and determine the rules."
This standard GB/T 13813-2001 and main technical differences are as follows.
a) increasing the principle Charpy impact test, devices, specimen, test procedures, results are expressed determined content rules.
b) amend the test requirements of metallic materials Coal pairing high-speed impact with fan impeller and protective circle.
c) the original standard 9,10,11,12 first chapter of this standard combined in Chapter 8, and increase Charpy impact test in Chapter 8 of the relevant
content.
d) For the same manufacturer of the same products in place of the test results were modified. From "the main parameters differ ≤ ± 5%" to "master
To parameterize the difference is less than or equal to ± 10% ".
e) Appendix increase Charpy impact test specimens drawings and requirements, and specifies the number of specimens for inspection.
Appendix A of this standard is a normative appendix.
This standard is proposed and managed by the coal industry, coal mine safety Standardization Technical Committee ventilation technology and equipment branch.
This standard was drafted. Coal Science Research Institute of Chongqing, the State Coal Mine Safety dust ventilation product quality supervision and inspection center.
The main drafters of this standard. Juguang Gang, Xusan Min, Ling Gang, Zhou Zhi Peng, Yang Liang, Tang Peng, Janssen.
This standard supersedes the previous editions are.
--- GB/T 13813-1992; GB/T 13813-2001.
Coal mine safety to friction spark of metallic materials
Test methods and decision rules
1 Scope
This standard specifies the test conditions for coal mine metal friction sparks safety tests, test procedures, results are expressed, and the decision rule
Submission requirements.
This standard applies to coal mine safety to friction spark test of metallic materials, other similar explosive environments metallic friction material
Rub spark safety test may be performed with reference to this standard.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 700 carbon structural steel
GB/T 1591 high strength low alloy structural steel
3 Terms and Definitions
The following terms and definitions for use in the present standard.
3.1
A density of less than 4.5 × 103kg/m3 of aluminum, magnesium, titanium and other light metal based alloy.
3.2
Collision flange on the rotary specimen.
3.3
Per unit time, the outer edge of the rotary member over the length of an arc test specimen fixed. (1) calculated according to the formula.
Vp = π
· D · shape
(1)
Where.
Vp --- rotational friction velocity in meters per second (m/s);
D --- rotating the outer edge of the specimen diameter in meters (m);
--- Rotary specimen like speed, in revolutions per minute (r/min).
3.4
Rotating the specimen and specimen collide with each other or fixed number of friction. Rotating the specimen has a flange on impact, according to equation (2) calculation; no rotating specimen
When the impact flange fixed to the rotary member and the test specimen mutual continuous friction, 0.5M arc length as each time over the impact, according to equation (3) calculation.
N = K
(2)
N = 2π
(3)
......
|