|
US$194.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 11700-2009: Small craft -- Marine propulsion reciprocating internal combustion engines -- Power measurements and declarations
Status: Valid GB/T 11700: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 11700-2009 | English | 194 |
Add to Cart
|
3 days [Need to translate]
|
Small craft -- Marine propulsion reciprocating internal combustion engines -- Power measurements and declarations
| Valid |
GB/T 11700-2009
|
| GB/T 11700-2003 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Small craft -- Marine propulsion engines and systems -- Power measurements and declarations
| Obsolete |
GB/T 11700-2003
|
| GB 11700-1989 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Small craft--Marine propulsion engines and system-power measurements and declarations
| Obsolete |
GB 11700-1989
|
PDF similar to GB/T 11700-2009
Basic data | Standard ID | GB/T 11700-2009 (GB/T11700-2009) | | Description (Translated English) | Small craft -- Marine propulsion reciprocating internal combustion engines -- Power measurements and declarations | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | U37 | | Classification of International Standard | 47.080 | | Word Count Estimation | 10,113 | | Date of Issue | 2009-03-09 | | Date of Implementation | 2009-11-01 | | Older Standard (superseded by this standard) | GB/T 11700-2003 | | Quoted Standard | ISO 3104-1994; ISO 3675-1998; ISO 5165-1998; ISO 15550-2002 | | Adopted Standard | ISO 8665-2006, IDT | | Regulation (derived from) | National Standard Approval Announcement 2009 No.2 (Total No.142) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the marine propulsion reciprocating internal combustion engine power measurement and calibration. Meanwhile, it also provides a calibration certificate and check for factory released (nominal) power approach. This standard applies to the hull length greater than 24m yachts and other boats for marine propulsion engines. This standard requires the combined use with ISO 15550. | GB/T 11700-2009: Small craft -- Marine propulsion reciprocating internal combustion engines -- Power measurements and declarations
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Small craft. Marine propulsion reciprocating internal combustion engines. Power measurements and declarations
ICS 47.080
U37
National Standards of People's Republic of China
GB/T 11700-2009/ISO 8665.2006
Replacing GB/T 11700-2003
Boat marine propulsion reciprocating internal combustion engines
Determination of power and calibration
(ISO 8665.2006, IDT)
Posted 2009-03-09
2009-11-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is equivalent to using ISO 8665.2006 "Determination boat marine propulsion engines and propulsion device power and calibration." (English
Chinese Version).
This standard replaces GB/T 11700-2003 "Small craft marine propulsion engines and propulsion device power measurement and calibration."
This standard compared with GB/T 11700-2003, there are the following changes.
--- Increased the ISO 15550.2002 references;
--- Deleted 3.2, Chapter 4;
--- Revised Chapter 5, Chapter 6, Chapter 7, Chapter 8, Chapter 9 of the content.
Appendix A of this standard and Appendix B is an informative annex.
The standard proposed by China State Shipbuilding Corporation.
This standard by the National Standardization Technical Committee boat.
This standard was drafted. China Shipbuilding Industry Corporation seventh Research Institute of ○.
The main drafters of this standard. Jing Bao.
This standard replaces the standards previously issued as follows.
GB 11700-1989, GB/T 11700-2003.
GB/T 11700-2009/ISO 8665.2006
Boat marine propulsion reciprocating internal combustion engines
Determination of power and calibration
1 Scope
This standard specifies the marine propulsion reciprocating internal combustion engines of power measurement and calibration. While also providing for certificates and check factory
Published calibration (nominal) power approach.
This standard applies to the hull length of not more than 24m yachts and other boats marine propulsion engines.
This standard is required to be used in combination with ISO 15550.
Note. The engine emission determination upon request ISO 8178, ISO 14396's.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
ISO 3104.1994 Determination and calculation of transparent and opaque liquid petroleum products kinematic viscosity
ISO 3675.1998 crude oil and liquid petroleum laboratory products - Determination of density or relative density hydrometer method
ISO 5165.1998 Petroleum products cetane ignition performance measurement method
ISO 15550.2002 internal combustion engine power measurement method General
3 Terms and Definitions
And ISO 15550 in the following terms and definitions apply to this standard established.
3.1
(No governor for spark-ignition engines) at the midpoint of the propeller manufacturer to select the recommended full throttle RPM range speed.
4 Symbol
ISO 15550.2002 symbol given in Table 2 apply to this standard.
5 Standard reference conditions
ISO 15550.2002 standard reference conditions specified in Chapter 5 apply to this standard.
6 Test methods
6.1 General
Using ISO 15550. Test Methods 6.3 20022.
6.2 Test conditions
ISO 15550.2002 in 6.3.4.1 ~ 6.3.4.14 applies, and the following additional conditions.
6.2.1 Test engine or propulsion device manufacturer's products should be in a representative sample, all auxiliary devices shall be installed
To identify and explain.
6.2.2 All but the ISO 15550.2002 equipment and accessories in Table 1, column 3 lists the tests required before demolition.
GB/T 11700-2009/ISO 8665.2006
|