HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 11357-2020 PDF English

US$185.00 · In stock · Download in 9 seconds
GB/T 11357-2020: Quality, roughness and balance of transmission pulleys
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

GB/T 11357: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
GB/T 11357-2020English185 Add to Cart 0-9 seconds. Auto-delivery Quality, roughness and balance of transmission pulleys Valid
GB/T 11357-2008English239 Add to Cart 3 days Quality, roughness and balance of transmission pulleys Obsolete
GB/T 11357-1989English279 Add to Cart 3 days Quality, Surfaceroughness and balance of transmission pulleys Obsolete

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: GB/T 11357-2020
      

Similar standards

GB/T 10414   GB/T 13487   GB/T 10716   GB/T 11356.2   

GB/T 11357-2020: Quality, roughness and balance of transmission pulleys

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT11357-2020
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 21.220.10 J 18 Replacing GB/T 11357-2008 Quality, roughness and balance of transmission pulleys (ISO 254:2011, Belt drives - Pulleys - Quality, finish and balance, MOD) ISSUED ON: APRIL 28, 2020 IMPLEMENTED ON: MARCH 01, 2021 Issued by: State Administration for Market Regulation; Standardization Administration of the People's Republic of China.

Table of Contents

Foreword ... 3 1 Scope ... 5 2 Normative references ... 5 3 Material and quality requirements of pulleys ... 5 4 Surface roughness ... 6 5 Balance ... 6 Annex A (informative) Technical differences between this Standard and ISO 254:2011 and their reasons... 12 Annex B (informative) Pulley balancing operation methods ... 13 Annex C (informative) A guide to the balance quality grade of constant (rigid) rotors ... 15

Foreword

This Standard was drafted in accordance with the rules given in GB/T 1.1-2009. This Standard replaces GB/T 11357-2008 “Material, roughness and balance of transmission pulleys”. Compared with GB/T 11357-2008, the main technical changes except for editorial changes are as follows: - MODIFY the normative references (see Clause 2); - ADD commonly used materials of pulleys (see Table 1); - ADD the specification of V-pulley and V-ribbed pulley grooves, all pulley bores, and working surface roughness under high-performance drives (see Table 2 of this Standard, Table 1 of the 2008 edition); - ADD the schematic diagram of static balancing and dynamic balancing (see Figure 1); - MODIFY the selection of balancing method (see 5.4 of this Standard, 5.4 of the 2008 edition); - MODIFY the symbol of pulley rim edge width (see 5.4, 5.7 of this Standard, 5.7 of the 2008 edition). This Standard uses the redrafting method to modify and adopt ISO 254:2011 “Belt drives - Pulleys - Quality, finish and balance”. Compared with ISO 254:2011, this Standard has many adjustments in structure, adding Table 1, Figure 1, Figure 2, Annex B and Annex C. Compared with ISO 254:2011, there are technical differences. The clauses involved in these differences have been marked by a vertical single line (∣) on the outer margin of the standard. Annex A gives a list of the corresponding technical differences and their reasons. This Standard has made the following editorial changes: - MODIFY the standard name; - Delete the third paragraph in Clause 1 of ISO 254:2011; - ADD the key in Figure 3; - ADD the informative annex B “Pulley balancing operation methods”; - ADD the informative annex C “Balance quality grade table”. Quality, roughness and balance of transmission pulleys

1 Scope

This Standard specifies the material, quality requirements, surface roughness and balance of pulleys. This Standard applies to V-pulleys, V-ribbed pulleys, flat pulleys and synchronous pulleys. It does not apply to variable-speed pulleys with movable rims.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 9239.1 Mechanical vibration - Balance quality requirements for rotors in a constant (rigid) state - Part 1: Specification and verification of balance tolerances (GB/T 9239.1-2006, ISO 1940-1:2003, IDT)

3 Material and quality requirements of pulleys

The pulley can be made of materials that can be processed to meet the dimensions and tolerance specified by the standard, and can withstand various working conditions (including heating, mechanical stresses, abrasion and other environments) without damage. The pulley material shall be suitable for dissipating the heat generated by the transmission. See Table 1 for commonly used materials for pulleys. Table 1 -- Commonly used materials of pulleys Pulley type Commonly used materials V-pulley, flat pulley Cast iron, steel, aluminum alloy, copper alloy and engineering plastics, etc. V-ribbed pulley Synchronous pulley Key: l - the pulley rim edge width, in millimeters (mm); d - the diameter (datum diameter or effective diameter) of the pulley, in millimeters (mm); n - the revolving speed of the pulley, in thousand revolutions per minute (kr/min). Figure 2 -- Diagram of Selection of balance method 5.5 For pulleys used for stock, since the conditions of use have not yet been determined, only static balancing is required. 5.6 Static balancing shall ensure that the eccentric residual imbalance mass of the pulley on the working diameter (datum diameter or effective diameter, which is determined by the pulley type) is not greater than the larger of the following two values: a) 0.005 kg; NOTE: This only applies to pulleys where there is adequate material to remove. Many light- duty pulleys do not have adequate space to drill balancing holes or to add appropriate masses by permanent means. b) 0.2 % of the equivalent mass of the pulley and accessories. The equivalent mass refers to the mass of a cast iron pulley with the same geometry as the tested pulley, in kilograms (kg). 5.7 If the pulley revolving speed is known, it shall determine whether dynamic balancing is required. Determine the limit speed n1 of the pulley from Figure 3 or according to formula (1): Revolving speed n/(kr/min) ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of GB/T 11357-2020 be delivered?

Answer: The full copy PDF of English version of GB/T 11357-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 11357-2020_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 11357-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- GB/T 11357-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version GB/T 11357-2020?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11357-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of GB/T 11357-2020?

A step-by-step guide to download PDF of GB/T 11357-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 11357-2020".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9