GB 41700-2022 PDF English
US$395.00 · In stock · Download in 9 secondsGB 41700-2022: Electronic cigarette Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB 41700-2022 | English | 395 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Electronic cigarette
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB 41700-2022
GB 41700-2022: Electronic cigarette---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB41700-2022
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 65.160
CCS X 87
Electronic cigarette
Issued on. APRIL 08, 2022
Implemented on. OCTOBER 01, 2022
Issued by. State Administration for Market Regulation;
Standardization Administration of the People's Republic of China.
Table of Contents
Foreword... 4
1 Scope... 5
2 Normative references... 5
3 Terms and definitions... 7
4 Design and raw material requirements... 8
4.1 Design requirements... 8
4.2 Raw material requirements... 9
5 Technical requirements... 10
5.1 Electronic cigarette device... 10
5.2 E-atomization material... 11
5.3 Electronic cigarette emissions... 11
6 Test methods... 12
6.1 Electronic cigarette device... 12
6.2 E-atomization material... 13
6.3 Electronic cigarette emissions... 13
7 Marks and product manual... 13
7.1 Marks... 13
7.2 Product manual... 14
Annex A (normative) Additives and maximum usage amount allowed in e-atomization
material... 16
Annex B (normative) Test method for atomization area temperature... 20
Annex C (normative) Determination of 2,3-butanedione in e-atomization material... 22
Annex D (normative) Standard suction conditions for electronic cigarette... 27
Annex E (normative) Determination of emission amount of nicotine in electronic
cigarette emissions... 29
Annex F (normative) Determination of emission amount of formaldehyde,
acetaldehyde, acrolein and 2,3-butanedione in electronic cigarette emissions... 33
Foreword
This document was drafted in accordance with the rules given in GB/T 1.1-2020
"Directives for standardization - Part 1.Rules for the structure and drafting of
standardizing documents".
Attention is drawn to the possibility that some of the elements of this document may be
the subject of patent rights. The issuing authority shall not be held responsible for
identifying any or all such patent rights.
This document was proposed by and shall be under the jurisdiction of State Tobacco
Monopoly Administration.
Electronic cigarette
1 Scope
This document defines terms and definitions for electronic cigarette. It specifies the
design and raw material requirements and technical requirements for electronic
cigarette. It describes the test methods and provides the marks and product manual.
This document applies to electronic cigarette and electronic cigarette module.
This document does not apply to other tobacco products.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
GB/T 1540, Paper and board - Determination of water absorption - Cobb method
GB/T 2423.7-2018, Environmental testing - Part 2.Test methods - Test Ec. Rough
handling shocks, primarily for equipment-type specimens
GB/T 4208-2017, Degrees of protection provided by enclosure (IP code)
GB 4343.1, Electromagnetic compatibility requirements for household appliances,
electric tools and similar apparatus - Part 1.Emission
GB 4706.1, Household and similar electrical appliances - Safety - Part 1.General
requirements
GB 4806.1, National Food Safety Standard - General Safety Requirements on Food
Contact Materials and Articles
GB 4806.3, National Food Safety Standard - Enamelware
GB 4806.4, National Food Safety Standard - Ceramic Ware
GB 4806.5, National Food Safety Standard - Glass Products
GB 4806.6, National Food Safety Standard - Plastic resin used in food-contact
GB 4806.7, National Food Safety Standard - Food Contact Used Plastic Materials
and Products
GB 4806.8, National Food Safety Standard - Food Contact Paper and Board
Materials and Their Products
GB 4806.9, National Food Safety Standard - Metal Materials and Articles Used in
Food-contact
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 electronic cigarette
An electron delivery system used to generate aerosols for human inhalation.
3.2 e-atomization material
Mixtures and auxiliary substances that can be fully or partially atomized by electronic
devices into inhalable aerosols.
3.3 e-liquid
E-atomization material in liquid form.
3.4 electronic cigarette device
An electronic device that aerosolizes e-atomization material into inhalable aerosol.
3.5 electronic cigarette module
A component or combination of components that constitutes an independent part of an
electronic cigarette.
3.6 cartridge
An electronic cigarette module that contains e-atomization material.
4 Design and raw material requirements
4.1 Design requirements
4.1.1 Electronic cigarette device
4.1.2 Electronic cigarette material
4.1.2.1 The selection of materials that come into contact with the oral cavity, e-
atomization material, and electronic cigarette emissions shall meet the requirements of
GB 4806.1, GB 4806.3 ~ GB 4806.11.
4.1.3 E-atomization material
4.2 Raw material requirements
4.2.1 Lithium-ion cells and battery packs
They shall meet the identification and safety requirements of SJ/T 11796.
4.2.2 E-atomization material
4.2.2.1 Nicotine, nicotine salts and tobacco extracts
4.2.2.1.1 Nicotine extracted from tobacco shall be used. The purity shall not be lower
than 99% (mass fraction).
4.2.2.2 Atomization agent
4.2.2.2.3 Water shall meet the requirements of GB 5749.
4.2.2.3 Additive in e-atomization material
The use of additive in e-atomization material shall meet the following requirements.
5 Technical requirements
5.1 Electronic cigarette device
5.1.1 Anti-filling
The electronic cigarette device and cartridge shall have a closed structure that prevents
artificial filling.
5.1.2 Leakproof fluid
The electronic cigarette device and cartridge using e-liquid shall have good airtightness.
There shall be no leakage.
5.2 E-atomization material
5.2.1 Nicotine
The nicotine concentration in the e-atomization material shall not be higher than
20mg/g. The total amount of nicotine shall not exceed 200mg.
5.2.2 Impurities and contaminants
They shall meet the requirements in Table 1.
6 Test methods
6.1 Electronic cigarette device
6.1.1 Anti-filling
For electronic cigarettes or cartridges filled with aerosols, visually inspect to determine
whether additional substances can be added.
6.1.2 Leakproof fluid
For electronic cigarettes or cartridges filled with e-liquid, place them on absorbent
paper that meets the requirements of GB/T 1540 for at least 6h in the most unfavorable
direction possible. Visually inspect whether there are traces of e-liquid on the absorbent
paper.
6.1.5 Waterproof
Follow the provisions of 14.2.4 in GB/T 4208-2017.Visually inspect to determine
whether there is fire or explosion.
6.1.6 Pressure relief safety
Overcharge a fully charged battery in an electronic cigarette device assembled for use.
Overvoltage increases in steps of 0.1V. Keep each step for 5min until n×6.0V. Visually
inspect to determine if pressure relief has occurred. If a pressure relief occurs, visually
determine whether the pressure relief direction is the same as the suction direction.
6.2 E-atomization material
6.2.1 Nicotine
The nicotine concentration of e-liquid is determined according to GB/T 41701.The
nicotine concentration of the solid e-atomization material is determined according to
YC/T 559.
6.2.2 2,3-butanedione
In accordance with the provisions of Annex C.
6.2.3 Heavy metals (as Pb)
In accordance with the provisions of GB 5009.74.
6.2.4 Arsenic (as As)
In accordance with the provisions of Method One of the first chapter of GB 5009.11-
2014.
6.3 Electronic cigarette emissions
7 Marks and product manual
7.1 Marks
7.1.1 Electronic cigarette products shall be marked with but not limited to the following.
7.1.2 Electronic cigarette module products shall indicate but not limited to the following.
7.1.1c) and 7.1.1e) shall be marked.
7.1.3 If the product mark cannot be marked on the product due to the limitation of
volume, shape, surface material or function, it shall be marked on the sales package.
7.2 Product manual
7.2.1 The product manual of electronic cigarette shall indicate.
7.2.2 The product manual of electronic cigarette module shall indicate.
7.2.1g) shall be indicated.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB 41700-2022 be delivered?Answer: The full copy PDF of English version of GB 41700-2022 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB 41700-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB 41700-2022_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 41700-2022 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB 41700-2022?A step-by-step guide to download PDF of GB 41700-2022_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB 41700-2022".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|