|
US$109.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 1886.103-2015: [Including 2021XG1] National Food Safety Standard -- Food Additives -- Microcrystalline cellulose
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 1886.103-2015 | English | 109 |
Add to Cart
|
2 days [Need to translate]
|
[Including 2021XG1] National Food Safety Standard -- Food Additives -- Microcrystalline cellulose
| Valid |
GB 1886.103-2015
|
PDF similar to GB 1886.103-2015
Basic data | Standard ID | GB 1886.103-2015 (GB1886.103-2015) | | Description (Translated English) | [Including 2021XG1] National Food Safety Standard -- Food Additives -- Microcrystalline cellulose | | Sector / Industry | National Standard | | Classification of Chinese Standard | X40 | | Word Count Estimation | 5,585 | | Date of Issue | 2015-09-22 | | Date of Implementation | 2016-03-22 | | Regulation (derived from) | PRC National Health and Family Planning Commission 2015 No.8 | | Issuing agency(ies) | National Health and Family Planning Commission of the People's Republic of China | GB 1886.103-2015: [Including 2021XG1] National Food Safety Standard -- Food Additives -- Microcrystalline cellulose
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(National food safety standards for food additives microcrystalline cellulose)
National Standards of People's Republic of China
National Food Safety Standard
Food additives microcrystalline cellulose
Issued on. 2015-09-22
2016-03-22 implementation
People's Republic of China
National Health and Family Planning Commission released
National Food Safety Standard
Food additives microcrystalline cellulose
1 Scope
This standard applies to fibrous plant material with an inorganic acid pounded paste, made from α- cellulose, and then treated as part of the depolymerization of cellulose,
Then removing the non-crystalline portion and purified microcrystalline cellulose obtained food additive.
Formula 2
(C6H10O5) n
3 Technical requirements
3.1 Sensory requirements
Sensory requirements shall comply with the requirements of Table 1.
Table 1 Sensory requirements
Project requires test methods
Color white or near white
State fine powder
Take the right amount of sample is placed in a clean, dry white porcelain dish, natural
Color and light to observe the state
3.2 Physical and Chemical Indicators
Physical and chemical indicators should be consistent with the provisions of Table 2.
Table 2. Physical and chemical indicators
Item Index Test Method
Carbohydrate content (in terms of cellulose, dry basis), w /% 97.0 ~ 102.0 Appendix A A.3
pH 5.0 ~ 7.5 in Appendix A A.4
Loss on drying, w /% ≤ 7.0 GB 5009.3 a direct drying
Residue on ignition, w /% ≤ 0.05 GB/T 9741
Water-soluble material, w /% ≤ 0.24 Appendix A A.5
Lead (Pb)/(mg/kg) ≤ 2.0 GB 5009.12
a drying temperature of 105 ℃ ± 2 ℃.
Appendix A
Testing method
A.1 General Provisions
This standard reagents and water in the absence of other specified requirements, refer to the three water analytical reagent and GB/T 6682 regulations. test
In the standard titration solution, impurity measurement standard solution, preparations and products, did not indicate when the other requirements, according to GB/T 601,
GB/T 602 and GB/T 603 provisions prepared. Solution was used in the tests did not indicate what is formulated with solvent, it refers to an aqueous solution.
A.2 Identification Test
A.2.1 solubility
Insoluble in water, dilute acid, dilute alkali solution and most organic solvents.
A.2.2 Identification
A.2.2.1 air nozzle with 38μm sieve 20g sample 5min. Failure to sift greater than 5%, then the sample is dissolved in 270mL 30g
Water; otherwise 45g sample was dissolved in 255mL of water. This is the test solution. The sample solution in a high-speed masher (18000r/min to
On) mixed 5min. Take 100mL of the mixed solution was transferred to 100mL graduated cylinder and allowed to stand 3h. The surface should be white, impervious
Bright, bubble-free upper layer dispersion (keep this dispersion was used to identify test A.2.2.2) appears.
A.2.2.2 A.2.2.1 Identification Test taken in the dispersion of the sample solution is added 1mL starch indicator solution in 20mL sample solution
(10g/L), add a few drops of iodine standard solution (0.1mol/L), no blue or purple to blue color.
A.3 Determination of carbohydrate content (in terms of cellulose, dry basis) of
A.3.1 Reagents and materials
A.3.1.1 sulfuric acid.
A.3.1.2 potassium dichromate solution. 0.5mol/L. Weigh 25g potassium dichromate, dissolved in water 1000mL, shake.
A.3.1.3 ferrous ammonium sulfate standard titration solution. c [(NH4) 2Fe (SO4) 2] = 0.1mol/L.
A.3.1.4 1,10- phenanthroline - ferrous indicator solution.
A.3.2 Analysis step
Weigh about 125mg sample accurate to 0.01mg, with about 25mL of water to be transferred to 300mL Erlenmeyer flask. Added 50.0mL
Potassium dichromate solution and mixed. Then carefully added 100mL sulfuric acid and heated to boiling. Heat was removed, allowed to stand at room temperature for 15min, to
After cooling in a water bath transferred to 250mL volumetric flask, dilute with water to nearly the mark, cooled to 25 ℃, and then diluted with water to volume and mix. take
The liquid 50.0mL, add 2 drops to 3 drops of 1,10-phenanthroline - ferrous indicator solution with 0.1mol/L ammonium ferrous sulfate standard titration solution titration, remember
The recorded consumption. Blank test at the same time, consumption records 0.1mol/L ammonium ferrous sulfate standard titration solution.
A.3.3 Calculation Results
Carbohydrates (cellulose meter, dry basis) of the mass fraction w1, according to equation (A.1) Calculated.
w1 =
(V1-V2) × 338
m × 100%
(A.1)
Where.
V1 --- blank test volume consumed ferrous ammonium sulfate standard titration solution, in milliliters (mL);
V2 --- sample consumption volume of ferrous ammonium sulfate standard titration solution, in milliliters (mL);
338 --- conversion factor;
M --- the quality of the sample, in milligrams (mg), according to the measured loss on drying value is corrected.
The results parallel arithmetic mean of the measurement results shall prevail.
A.4 pH measurement
Weigh 5g sample, add 40mL water, shaken 20min, centrifugation. Then measured with a pH meter method according to GB/T 9724 provisions
pH of the supernatant.
A.5 Determination of water-soluble substance
A.5.1 Analysis step
Weigh 5g samples, accurate to 0.0001g, and 80mL water mix, this is a sample solution. Sample solution was shaken for 10min, the sample
The solution was filtered into a filter paper of known weight evaporating dish, the filtrate was evaporated to dryness on a steam bath, and then dried under ± 2 ℃ 1h, cooled at 105 ℃,
Weighed.
A.5.2 Calculation Results
The mass fraction of water-soluble substance w2, according to equation (A.2) Calculated.
w2 =
m2-m1
m0
× 100% (A.2)
Where.
After drying --- m2 evaporating dish along with the quality of the dried product, expressed in grams (g);
Mass m1 --- evaporating dish in units of grams (g);
m0 --- sample mass, in grams (g).
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 1886.103-2015_English be delivered?Answer: Upon your order, we will start to translate GB 1886.103-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB 1886.103-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB 1886.103-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|