HOME   Cart(1)   Quotation   About-Us Tax PDFs Standard-List
Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 189759 (28 May 2023)

GB 15811-2016 (GB15811-2016)

Chinese standards (related to): 'GB 15811-2016'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)See DetailStatusGoogle Book
GB 15811-2016English135 Add to Cart 0-9 seconds. Auto delivery. Sterile hypodermic needles for single use GB 15811-2016 Valid GB 15811-2016
GB 15811-2001English529 Add to Cart 2 days Sterile hypodermic needles for single use GB 15811-2001 Obsolete GB 15811-2001
GB 15811-1995English479 Add to Cart 4 days Sterile hypodermic needles for single use GB 15811-1995 Obsolete GB 15811-1995

Standard ID GB 15811-2016 (GB15811-2016)
Description (Translated English) Sterile hypodermic needles for single use
Sector / Industry National Standard
Classification of Chinese Standard C31
Classification of International Standard 11.040.20
Word Count Estimation 17,195
Date of Issue 2016-06-14
Date of Implementation 2018-01-01
Older Standard (superseded by this standard) GB 15811-2001
Quoted Standard GB/T 1962.1-2015; GB/T 1962.2-2001; GB/T 6682; GB/T 14233.1-2008; GB/T 14233.2-2005; GB 15810; GB/T 16886.1; GB/T 18457-2015; YY/T 0296; YY/T 0466.1
Adopted Standard ISO 7864-1993, NEQ
Drafting Organization Zhejiang Kangdelai Medical Instrument Co., Ltd
Administrative Organization National Standardization Technical Committee for Medical Injectors (Needles)
Regulation (derived from) National Standard Announcement No. 8 of 2016
Summary This standard specifies the requirements for disposable sterile injection needles (hereinafter referred to as injection needles) with a nominal outer diameter of 0.3 mm to 1.2 mm. The standard needle injection is a sterile syringe with GB 15810 supporting the use of disposable, but also suitable for supporting the use of other appropriate injection equipment, as the human skin, subcutaneous, muscle, intravenous injection with liquid. This standard does not apply to single-use dental needles. Non-sterile state for single-use sterile syringe with a one-time use of syringes can refer to this standard.

GB 15811-2016: PDF in English
GB 15811-2016
ICS 11.040.20
C 31
Replacing GB 15811-2001
Sterile hypodermic needles for single use
(ISO 7864.1993, NEQ)
ISSUED ON. JUNE 14, 2016
Issued by. General Administration of Quality Supervision, Inspection
and Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword ... 3 
1 Scope ... 5 
2 Normative references ... 5 
3 Structural type and naming ... 6 
4 Marking example ... 7 
5 Materials ... 8 
6 Physical properties ... 8 
7 Chemical properties ... 11 
8 Biological properties ... 12 
9 Packaging ... 13 
10 Marks ... 13 
11 Inspection rules ... 15 
12 Storage ... 15 
Annex A (informative) Flow testing device ... 16 
Annex B (informative) Test and evaluation method for syringe needle
puncture force ... 17 
Annex C (Normative) Biological evaluation ... 20 
Annex D (informative) Inspection rules ... 21 
Bibliography ... 22 
All technical content of this Standard is mandatory.
This Standard was drafted in accordance with the rules given in GB/T
This Standard replaces GB 15811-2001 Sterile hypodermic needles for single
use. Compared with GB 15811-2001, the main technical changes are as
- added Clause 5 “Materials”;
- added Annex A Injection needle flow test device schematic;
- provided needle puncture force requirements in Annex B (informative)
Needle puncture needle requirements and test methods;
- deleted 4.3.1 Needle tube rigidity, 4.3.2 Needle tube toughness and
4.3.3 Needle tube corrosion resistance terms;
- added requirements that paper dialysis packaging materials shall be
used for primary packaging;
- modified Annex D Inspection rules.
This Standard uses redrafting method to modify and adopt ISO 7864.1993
Sterile hypodermic needles for single use. The consistency with ISO 7864.
1993 is not equivalent.
Attention is drawn to the possibility that some of the elements of this Standard
may be the subject of patent rights. The issuing authority shall not be held
responsible for identifying any or all such patent rights.
This Standard was proposed by China Food and Drug Administration.
This Standard shall be under the jurisdiction of National Technical Committee
on Medical Syringes (Needles) of Standardization Administration of China
(SAC/TC 95).
The drafting organizations of this Standard. Zhejiang Kant Lai Medical
Devices Co., Ltd., Shanghai Medical Device Testing Institute.
Main drafters of this Standard. Zhang Honghui, Ding Biao.
Versions of standard substituted by this Standard are.
- GB 15811-1987. GB 15811-1995, GB 15811-2001.
Sterile hypodermic needles for single use
1 Scope
This Standard specifies the requirements for sterile hypodermic needles for
single use of which the nominal outer diameters of needle tube are 0.3mm ~
1.2mm (hereinafter referred to as syringe needles).
The syringe needles specified in this Standard shall be matched with sterile
hypodermic needles for single use of GB 15810. They are also suitable for
other appropriate injection equipment, as human skin, subcutaneous, muscle,
vein and other liquid injections.
This Standard is not applicable to disposable dental needles.
The sterile hypodermic needles for single use of disposable sterile syringes in
non-sterile state shall refer to this Standard.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including
any amendments) applies.
GB/T 1962.1-2015, Conical fittings with a 6% (Luer) taper for syringes,
needles and certain other medical equipment - Part 1. General
requirement (ISO 594-1.1986, IDT)
GB/T 1962.2-2001, Conical fittings with a 6% (Luer) taper for syringes,
needles and certain other medical equipment - Part 2. Lock fittings (ISO
594-2.1998, IDT)
GB/T 6682, Water for analytical laboratory use - Specification and test
methods (GB/T 6682-2008, ISO 3696.1987, MOD)
GB/T 14233.1-2008, Test methods for infusion transfusion injection
equipment for medical use - Part 1. Chemical analysis methods
GB/T 14233.2-2005, Test methods for infusion, transfusion, injection
equipment for medical use - Part 2. Biological test methods
GB 15810, Sterile hypodermic syringes for single use (GB 15810-2001,eqv
ISO 7886-1.1993)
GB/T 16886.1, Biological evaluation of medical devices - Part 1. Evaluation
and testing within a risk management process (GB/T 16886.1-2011, ISO
10993-1.2009, IDT)
GB/T 18457-2015, Stainless steel needle tubing for the manufacture of
medical devices (ISO 9626.1991, MOD)
YY/T 0296, Hypodermic needles for single use - Colour coding for
identification (YY/T 0296-2013, ISO 6009.1992, IDT)
YY/T 0466.1, Medical devices - Symbols to be used with medical device
labels, labelling and information to be supplied - Part 1. General
requirements (YY/T 0466.1-2009, ISO 15233-1.2007, IDT)
3 Structural type and naming
3.1 The structure of syringe needle, the terms of each part and needle tube
length L are shown in Figure 1.
1 - needle seat;
2 - link;
3 - needle tube;
4 - jacket;
L - needle tube length.
Figure 1 -- Typical needle and sheath schematic
3.2 Syringe needle tip geometry and naming are as shown in Figure 2.
d0 - needle tube outer diameter;
d1 - needle tube inner diameter;
A - needle tip length;
B0 - first bevel nominal length;
B1 - first right bevel length;
B2 - first left bevel length;
C0 - nominal length of the second bevel;
C1 - right second slope length;
C2 - left second slope length;
α - first bevel angle;
Φ - second bevel angle;
β - tip angle;
θ1 - right second bevel rotation angle;
θ2 - left second bevel rotation angle;
γ - joint second bevel angle.
Figure 2 -- Typical tip geometry and naming
4 Marking example
4.1 The mark (specification) of the syringe needle product is composed of
the nominal outer diameter of the needle tube, the nominal length (L in Figure
1), the tube wall type and the first bevel angle (α). The outer diameter and
length are expressed in "mm", the tube wall type in RW (normal wall), TW
(thin wall) or ETW (extra thin wall), the first bevel angle in LB (long bevel
angle) or SB (short bevel angle).
4.2 The syringe needle that complies with this Standard of which the
nominal outer diameter of needle tube is 0.7 mm, the length (L) is 30 mm, the
tube wall type is thin wall, the first bevel angle is a long bevel angle shall be
Syringe needle rotates at an
angle of Φ
The view shows the difference
when the first bevel crosses the tip
marked as. 0.7 × 30 TWLB.
5 Materials
5.1 Tubes for the manufacture of injection needles shall meet the
requirements of GB/T 18457-2015.
NOTE. Each production lot of needles shall have information on rigidity, toughness and
corrosion resistance.
5.2 The materials used to make the needle seat shall meet the
requirements of Clause 7 and Clause 8.
6 Physical properties
6.1 Cleanness
In 300lx ~ 700lx illumination, with normal or corrected vision, without
amplification, observe the needle tube; and under 2.5 times magnification,
observe the needle seat surface that shall be clean, without foreign matters.
6.2 Color code
The syringe needle shall use the colors of needle seat and/or jacket as the
mark of nominal outer diameter of needle tube in according to the
requirements of YY/T 0296.
6.3 Uprightness
Visually observe the connection of needle seat and needle tube that shall be
upright. The needle tube shall not be obviously skewed.
6.4 Connection fastness
The connection between needle seat and needle tube shall be solid. Fix the
syringe needle tube on a special instrument. Use needle seat to allocate
direction and carry out the impact-free pull-off test under the load specified in
Table 1. Both must not be loose or separated.
Table 1 -- Load of pull-off test
Table 1 (continued)
6.5 Smoothness
The pinhole of syringe needle shall be smooth.
a) the tip cleaner specified in Table 2 shall be able to pass through freely;
b) or under a water pressure not greater than 100 kPa, the flow shall not be
less than 80% of minimum inner diameter syringe flo...