GA/T 1366-2017 PDF English
US$1795.00 · In stock · Download in 9 secondsGA/T 1366-2017: Police digital trunking communication system - technical specifications for mobile stations Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GA/T 1366-2017 | English | 1795 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Police digital trunking communication system - technical specifications for mobile stations
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GA/T 1366-2017
GA/T 1366-2017: Police digital trunking communication system - technical specifications for mobile stations
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GAT1366-2017
GA
PUBLIC SECURITY INDUSTRY STANDARD
ICS 33.060.01
A 90
Police digital trunking communication system - technical
specifications for mobile stations
Issued on. FEBRUARY 08, 2017
Implemented on. FEBRUARY 08, 2017
Issued by. Ministry of Public Security of the People��s Republic of China
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative references... 5
3 Terms and definitions, abbreviations... 6
4 Mobile station equipment composition... 8
5 Mobile station requirements... 10
6 Test methods... 18
7 Parameter configuration... 18
8 Peripheral equipment interface protocol... 46
9 Marking, packaging, transportation and storage... 64
Appendix A (Normative) Common parameter storage names... 66
Appendix B (Normative) User numbers and dialing rules... 67
Appendix C (Normative) Recommended naming conventions for general parameters
... 86
Appendix D (Normative) Group call mode air interface configuration... 87
Appendix E (Informative) Use of MSC and SDL diagrams... 93
Appendix F (Informative) AT command service process example... 95
1 Scope
This Standard specifies the composition, functions, application development interface,
performance indicators, over the air programming and numbering plan requirements for
mobile stations of the police digital trunking (PDT) communication system.
This Standard applies to the development, production and acceptance of mobile stations
of the police digital trunking (PDT) communication system.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
GB/T 191, Packaging. Pictorial marking for handling of goods
GA/T 1056-2013, Police digital trunking communication system - General
technical specifications
GA/T 1058-2013, Police digital trunking communication system - Technical
specifications for call control layer of air interface;
GA/T 1059-2013, Police digital trunking communication system - Security
technical specifications
GA/T 1255-2016, Police digital trunking communication system - Technical
requirements and measurement methods for radio frequency equipment
SJ/T 11072-1996, Type BNC radio-frequency coaxial connectors
SJ/T 11073-1996, Type SMA radio-frequency coaxial connectors
SDA SD Card Specification - Part 1.Simplified Physical Layer Specification
USB Power Delivery Specification V1.0
3 Terms and definitions, abbreviations
3.1 Terms and definitions
For the purpose of this document, terms and definitions given in GA/T 1056-2013 and
GA/T 1059-2013 as well as the following apply.
3.2 Abbreviated terms
For the purpose of this document, abbreviated terms given in GA/T 1056-2013 and
GA/T 1059-2013 as well as the following apply. For ease of use, some abbreviated
terms given in GA/T 1056-2013 and GA/T 1059-2013 are repeated below.
4 Mobile station equipment composition
4.1 Portable station composition
4.1.1 Portable station host
4.1.1.1 The host of the portable station shall include the following components.
4.1.1.2 The host of the portable station may include the following components.
4.1.2 Portable station accessories
4.1.2.1 The portable station shall include the following accessories.
4.1.2.2 The portable station may include the following accessories.
4.2 Vehicle station composition
4.2.1 Vehicle station host composition
The host of the vehicle station shall include the following components.
4.2.2 Vehicle station accessories
4.2.2.1 The vehicle station shall include the following accessories.
4.2.2.2 The vehicle station may include the following accessories.
5 Mobile station requirements
5.1 General requirements
5.1.1 Design requirements
The mobile station shall be designed following the principles of serialization,
standardization, modularization and downward compatibility, and shall be designed for
reliability, maintainability, ease of use, security and electromagnetic compatibility.
Documents guiding users on correct installation, use and daily maintenance shall be
provided with the product.
5.1.2 Appearance and mechanical structure
The surface of the mobile platform shall be smooth and flat, and shall not have defects
such as cracks, deformation, scratches, burrs, paint peeling, etc. The metal surface shall
have anti-rust and anti-corrosion coatings and shall not have rust or other mechanical
damage.
5.1.3 Technical specifications
The technical specifications shall comply with the provisions of 4.1.1 of GA/T 1056- 2013.
5.1.4 Speech coding
The mobile station shall support or be compatible with NVOC speech coding. NVOC
speech coding realizes speech encoding and decoding based on linear prediction
technology and using DBELP (Division-Band Excitation Linear Prediction).
5.1.5 Extended interface
5.1.5.1 Extended interface of portable station
The portable station extended interface shall be provided with SPK, MIC, GPIO, PTT
and data interfaces, and shall support the connection of hand or shoulder microphones,
earphones and data expansion applications.
5.1.5.2 Extended interface of vehicle station
The vehicle station extended interface shall have SPK, MIC, GPIO, PTT and data
interfaces, and shall support the connection of audio input, audio output and data
expansion applications. The data interface shall support USB or UART communication,
without limiting the physical interface form of USB and UART input and output. USB
shall support USB slave mode, and the USB interface shall be compatible with USB2.0
related regulations. The UART interface specifications shall comply with the provisions
of Table 2.
The vehicle station front panel interface shall be able to connect to the data cable.
5.1.6 Screen
Machines provided with screens shall be able to display Chinese short messages. The
screen display shall include the following information.
5.1.7 Buttons
5.1.7.1 Basic buttons
The portable station shall have the following buttons.
5.1.8 General prompt tone
The prompt tone of the mobile station shall be able to distinguish the following working
states.
5.1.9 Security status prompt tone
The mobile station shall have the following security status prompt tone.
5.1.10 Indicator light
Indication of transmit status shall be supported.
5.1.11 Satellite location
Beidou location shall be supported.
5.5 mm, which is GND.
A flexible adaptable charger base can be selected. The structural design of this base
shall be able to adapt to batteries and hosts of different structures and shall have
charging protection function. The floating charge voltage of the charger for the battery
shall be 8.4 V.
5.1.15 Antenna
The recommended connector for the portable station antenna is an externally threaded
SMA jack connector.
The recommended connector for the vehicle station antenna is a BNC pin connector.
5.2 Functional requirements
5.2.1 Basic functional requirements
Basic functions shall comply with the provisions of 5.2 in GA/T 1056-2013.
5.2.2 Extended functional requirements
5.3 Performance requirements
5.3.1 Electrical performance requirements
Electrical performance requirements shall comply with relevant requirements in 5.4 of
GA/T 1255-2016.
5.4 Requirements for electromagnetic compatibility
Shall comply with relevant requirements in 5.3 of GA/T 1255-2016.
5.5 Requirements for environmental adaptability
Shall comply with relevant requirements in 5.5 of GA/T 1255-2016.
5.6 Durability requirements
The life of the PTT button shall be no less than 400 000 times.
6 Test methods
The functional test method shall meet the requirements of GA/T 1367-2017, and the
performance, environment and electromagnetic compatibility test methods shall meet
the relevant requirements of Chapters 6 ~ 9 of GA/T 1255-2016.
7 Parameter configuration
7.1 Wired configuration
The mobile station shall support the programming computer software to configure
internal parameters through the data cable. The names of the programming computer
software configuration items shall be clear and unambiguous. The recommended
naming method is shown in Appendix C.
7.2 Over the air programming
7.2.1 General
Over the air programming is the system remotely configuring/querying the parameters
of the mobile station through wireless means, which shall be able to support parameter
modification of basic services.
7.2.2 Service support
The following functions shall be supported for mobile station over the air programming.
7.2.3 Over the air process
7.2.3.1 Parameter configuration process
The parameter configuration service process is as follows.
7.2.4 Configuration parameters
7.2.4.1 Over the air programming data format
The general bearer format of over the air programming data shall consist of protocol
version, service type, payload length and effective load, and its composition shall be as
shown in Figure 10.The content shall consist of MFID, service parameters and service
data. Service data is divided into.
8 Peripheral equipment interface protocol
8.1 Basic rules and symbol conventions
8.1.1 General
The peripheral equipment interface protocol is based on the AT command format. Refer
to Appendix F for the service process flow.
8.1.2 Basic rules
The peripheral equipment interface protocol shall comply with the following basic rules.
8.1.3 Symbol conventions
The peripheral equipment interface protocol shall comply with the following symbol
conventions.
8.2 Basic command syntax
8.2.1 Test connection
The test connection command has the following syntax.
8.2.2 Set command echo switch
The set command echo switch has the following syntax.
8.2.3 Set reply code suppression
The set reply code suppression command has the following syntax.
8.2.4 Obtaining manufacturer information
The command to obtain manufacturer information has the following syntax format.
8.2.5 Obtaining model information
The command to obtain model information has the following syntax format.
8.2.6 Obtaining software version information
The command to obtain software version information has the following syntax format.
8.2.7 Setting/reading interface Baud rate
The command to set/read the interface Baud rate has the following syntax.
8.2.8 Obtaining battery level
The command to obtain battery level has the following syntax.
8.2.9 Query information
The query information command has the following syntax format.
8.3 Call command
9 Marking, packaging, transportation and storage
9.1 Marking
The packaging box shall have the following markings.
9.2 Packaging
The marking on the packaging box shall match the product model, and the packaging
box shall not have defects such as damage, deformation, and moisture.
The product shall be placed properly in the packaging box, and the product, accessories,
cushioning, etc. shall be placed in the correct position. There shall be no foreign objects
in the box.
9.3 Transportation
Mobile station equipment packed into boxes shall be able to withstand transportation
by motor vehicles, airplanes, ships, etc.
9.4 Storage
The packaged mobile station equipment shall be stored in a warehouse with a
temperature of -10 �� ~ 40 �� and a humidity not exceeding 90%. The warehouse shall
be clean and ventilated.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GA/T 1366-2017 be delivered?Answer: The full copy PDF of English version of GA/T 1366-2017 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GA/T 1366-2017_English with my colleagues?Answer: Yes. The purchased PDF of GA/T 1366-2017_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GA/T 1366-2017 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GA/T 1366-2017?A step-by-step guide to download PDF of GA/T 1366-2017_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GA/T 1366-2017".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|