FZ/T 81008-2021 PDF English
US$245.00 · In stock · Download in 9 secondsFZ/T 81008-2021: Jackets Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid FZ/T 81008: Evolution and historical versions
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
FZ/T 81008-2021 | English | 245 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Jackets
| Valid |
FZ/T 81008-2011 | English | 719 |
Add to Cart
|
3 days
|
Jackets
| Obsolete |
FZ/T 81008-2004 | English | 799 |
Add to Cart
|
5 days
|
Jackets
| Obsolete |
FZ/T 81008-1994 | English | 279 |
Add to Cart
|
3 days
|
Jackets
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: FZ/T 81008-2021
FZ/T 81008-2021: Jackets---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/FZT81008-2021
FZ
TEXTILE INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 61.020
Y 76
Replacing FZ/T 81008-2011
Jackets
Issued on. APRIL 19, 2021
Implemented on. JULY 01, 2021
Issued by. Ministry of Industry and Information Technology of the PRC
Table of Contents
Foreword... 3
1 Scope... 6
2 Normative References... 6
3 Requirements... 7
4 Inspection Method... 16
5 Inspection Rules... 18
6 Marking, Packaging, Transportation and Storage... 24
1 Scope
This Standard specifies the requirements, inspection methods, inspection rules,
marking, packaging, transportation and storage of jackets.
This Standard is applicable to jackets produced with textile woven fabric as the main
fabric.
This Standard is not applicable to clothing for infants and young children aged 36
months and below.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) is applicable to this document.
GB/T 250 Textiles - Tests for Colour Fastness - Grey Scale for Assessing Change
in Colour
GB/T 1335 (all parts) Size Designation of Clothes
GB/T 3917.2 Textiles - Tear Properties of Fabrics - Part 2.Determination of Tear
Force of Trouser-Shaped Test Specimens (Single Tear Method)
GB/T 3921-2008 Textiles - Tests for Colour Fastness - Colour Fastness to
Washing with Soap or Soap and Soda
GB/T 4802.1-2008 Textiles - Determination of Fabric Propensity to Surface
Fuzzing and to Pilling - Part 1.Circular Locus Method
GB/T 4841.3 Colour Cards of Standard Depths for Dyeing with Dyestuffs 2/1, 1/3,
1/6, 1/12, 1/25
3 Requirements
3.1 Instructions for use
The instructions for use are in accordance with the provisions of GB/T 5296.4 and GB
31701.
3.2 Size designation
3.3 Raw materials
3.3.1 Fabric
According to the relevant textile fabric standards, select fabrics that meet the quality
requirements of this Standard.
3.3.2 Lining
Use lining that is suitable for the used fabric and meets the quality requirements of this
Standard.
3.3.3 Auxiliary materials
3.3.3.1 Interlining, shoulder pads, decorative lace, pocket cloth
Use interlinings, shoulder pads, decorative lace, pocket cloth suitable for the
performance and colour of the used fabrics and linings, and their quality shall meet the
requirements of this Standard.
3.3.3.2 Sutures, cords, elastic bands
Use sutures, cords, and elastic bands that are suitable for the performances of the
used fabrics, linings, and auxiliary materials (except for decorative threads and
decorative ribbons).
4 Inspection Method
4.1 Inspection tools
4.1.1 Steel tape or ruler, the graduation value is 1mm.
4.2 Specification determination
The measurement method of the main part specifications is in accordance with the
provisions of GB/T 31907; and the allowable deviation of the specifications is in
accordance with the provisions of Table 4.
4.3 Appearance determination
4.3.1 The appearance inspection generally adopts lighting; the illuminance is no less
than 600lx; and northern sky light can also be used if possible.
4.3.4 The stitch density is measured at 3cm on the finished sewing stitches (except for
thick and thin parts).
4.3.5 The degree of warp and weft yarn skew is measured according to the provisions
of GB/T 14801, and the result is calculated according to Formula (1).
4.4.6 The colour fastness to transfer in joints shall be tested in accordance with Method
A specified in GB/T 31127-2014.
4.4.7 Pilling is tested according to the provisions of GB/T 4802.1-2008 (among them,
sanded fabrics, wool-like fabrics, and worsted fabrics are in accordance with Method
E; loose-structured worsted fabrics and woollen fabrics are in accordance with Method
F; and the rest are in accordance with Method D).
4.4.8 The tearing strength shall be tested in accordance with the provisions of GB/T
3917.2.
4.4.9 The peeling strength of the adhesive lining shall be tested in accordance with the
provisions of FZ/T 80007.1.
4.4.13 For the test items that do not mention the sampling location, specimens can be
selected from the finished product according to the test needs.
5 Inspection Rules
5.1 Inspection classification
5.1.1 Finished product inspection is divided into exit-factory inspection and type
inspection. The timing of the type inspection is based on the actual conditions of the
manufacturer or the contractual agreement. It is generally carried out when the
production is transferred, resumed after stopping, and the raw materials or processes
have major changes.
5.2 Appearance quality grade and defect classification rules
5.2.1 Appearance quality classification
The quality level of finished products is based on the existence and severity of defects.
The single product in the sample is classified by the number of defects and its severity;
and the batch grade is classified by the number of grades of the single products in the
sample.
5.2.2 Classification of appearance defects
A single product that does not meet the technical requirements specified in this
Standard constitutes a defect.
5.4 Judgment rules
5.4.1 Appearance judgment of a single piece (sample)
Superior products. the number of serious defects = 0, the number of major defects =
0, the number of minor defects ≤ 4.
5.4.2 Determination of batch grade
Superior product batch. The number of superior products in the appearance inspection
sample is ≥90%, the number of Class-I products and qualified products is ≤10%, and
no unqualified products are included. All physical and chemical property tests have
met the requirements of superior products index.
5.4.3 Qualification judgment
If the number of batches judged in the random inspection complies with the provisions
of corresponding level in 5.4.2, it shall be judged to be a qualified batch. Otherwise,
the batch of products is judged to be unqualified.
5.4.4 Re-inspection provisions
When the number of batches judged in the random inspection does not meet the
requirements of this Standard or the delivery parties have objections to the inspection
results, a second random inspection can be carried out, and the number of random
inspections shall be doubled. Take the re-inspection result as the final judgment result.
6 Marking, Packaging, Transportation and Storage
The marking, packaging, transportation and storage of the finished products shall be
implemented in accordance with FZ/T 80002.
FZ/T 81008-2021
FZ
TEXTILE INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 61.020
Y 76
Replacing FZ/T 81008-2011
Jackets
Issued on. APRIL 19, 2021
Implemented on. JULY 01, 2021
Issued by. Ministry of Industry and Information Technology of the PRC
Table of Contents
Foreword... 3
1 Scope... 6
2 Normative References... 6
3 Requirements... 7
4 Inspection Method... 16
5 Inspection Rules... 18
6 Marking, Packaging, Transportation and Storage... 24
1 Scope
This Standard specifies the requirements, inspection methods, inspection rules,
marking, packaging, transportation and storage of jackets.
This Standard is applicable to jackets produced with textile woven fabric as the main
fabric.
This Standard is not applicable to clothing for infants and young children aged 36
months and below.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) is applicable to this document.
GB/T 250 Textiles - Tests for Colour Fastness - Grey Scale for Assessing Change
in Colour
GB/T 1335 (all parts) Size Designation of Clothes
GB/T 3917.2 Textiles - Tear Properties of Fabrics - Part 2.Determination of Tear
Force of Trouser-Shaped Test Specimens (Single Tear Method)
GB/T 3921-2008 Textiles - Tests for Colour Fastness - Colour Fastness to
Washing with Soap or Soap and Soda
GB/T 4802.1-2008 Textiles - Determination of Fabric Propensity to Surface
Fuzzing and to Pilling - Part 1.Circular Locus Method
GB/T 4841.3 Colour Cards of Standard Depths for Dyeing with Dyestuffs 2/1, 1/3,
1/6, 1/12, 1/25
3 Requirements
3.1 Instructions for use
The instructions for use are in accordance with the provisions of GB/T 5296.4 and GB
31701.
3.2 Size designation
3.3 Raw materials
3.3.1 Fabric
According to the relevant textile fabric standards, select fabrics that meet the quality
requirements of this Standard.
3.3.2 Lining
Use lining that is suitable for the used fabric and meets the quality requirements of this
Standard.
3.3.3 Auxiliary materials
3.3.3.1 Interlining, shoulder pads, decorative lace, pocket cloth
Use interlinings, shoulder pads, decorative lace, pocket cloth suitable for the
performance and colour of the used fabrics and linings, and their quality shall meet the
requirements of this Standard.
3.3.3.2 Sutures, cords, elastic bands
Use sutures, cords, and elastic bands that are suitable for the performances of the
used fabrics, linings, and auxiliary materials (except for decorative threads and
decorative ribbons).
4 Inspection Method
4.1 Inspection tools
4.1.1 Steel tape or ruler, the graduation value is 1mm.
4.2 Specification determination
The measurement method of the main part specifications is in accordance with the
provisions of GB/T 31907; and the allowable deviation of the specifications is in
accordance with the provisions of Table 4.
4.3 Appearance determination
4.3.1 The appearance inspection generally adopts lighting; the illuminance is no less
than 600lx; and northern sky light can also be used if possible.
4.3.4 The stitch density is measured at 3cm on the finished sewing stitches (except for
thick and thin parts).
4.3.5 The degree of warp and weft yarn skew is measured according to the provisions
of GB/T 14801, and the result is calculated according to Formula (1).
4.4.6 The colour fastness to transfer in joints shall be tested in accordance with Method
A specified in GB/T 31127-2014.
4.4.7 Pilling is tested according to the provisions of GB/T 4802.1-2008 (among them,
sanded fabrics, wool-like fabrics, and worsted fabrics are in accordance with Method
E; loose-structured worsted fabrics and woollen fabrics are in accordance with Method
F; and the rest are in accordance with Method D).
4.4.8 The tearing strength shall be tested in accordance with the provisions of GB/T
3917.2.
4.4.9 The peeling strength of the adhesive lining shall be tested in accordance with the
provisions of FZ/T 80007.1.
4.4.13 For the test items that do not mention the sampling location, specimens can be
selected from the finished product according to the test needs.
5 Inspection Rules
5.1 Inspection classification
5.1.1 Finished product inspection is divided into exit-factory inspection and type
inspection. The timing of the type inspection is based on the actual conditions of the
manufacturer or the contractual agreement. It is generally carried out when the
production is transferred, resumed after stopping, and the raw materials or processes
have major changes.
5.2 Appearance quality grade and defect classification rules
5.2.1 Appearance quality classification
The quality level of finished products is based on the existence and severity of defects.
The single product in the sample is classified by the number of defects and its severity;
and the batch grade is classified by the number of grades of the single products in the
sample.
5.2.2 Classification of appearance defects
A single product that does not meet the technical requirements specified in this
Standard constitutes a defect.
5.4 Judgment rules
5.4.1 Appearance judgment of a single piece (sample)
Superior products. the number of serious defects = 0, the number of major defects =
0, the number of minor defects ≤ 4.
5.4.2 Determination of batch grade
Superior product batch. The number of superior products in the appearance inspection
sample is ≥90%, the number of Class-I products and qualified products is ≤10%, and
no unqualified products are included. All physical and chemical property tests have
met the requirements of superior products index.
5.4.3 Qualification judgment
If the number of batches judged in the random inspection complies with the provisions
of corresponding level in 5.4.2, it shall be judged to be a qualified batch. Otherwise,
the batch of products is judged to be unqualified.
5.4.4 Re-inspection provisions
When the number of batches judged in the random inspection does not meet the
requirements of this Standard or the delivery parties have objections to the inspection
results, a second random inspection can be carried out, and the number of random
inspections shall be doubled. Take the re-inspection result as the final judgment result.
6 Marking, Packaging, Transportation and Storage
The marking, packaging, transportation and storage of the finished products shall be
implemented in accordance with FZ/T 80002.
...... Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of FZ/T 81008-2021 be delivered?Answer: The full copy PDF of English version of FZ/T 81008-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of FZ/T 81008-2021_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 81008-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- FZ/T 81008-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version FZ/T 81008-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 81008-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
How to buy and download a true PDF of English version of FZ/T 81008-2021?A step-by-step guide to download PDF of FZ/T 81008-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD). Step 2: Search keyword "FZ/T 81008-2021". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|