|
US$959.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
CNCA C11-03-2014: [Including 2017XG1] China Compulsory Certification Implementation Rules - Motorcycle Engine
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| CNCA C11-03-2014 | English | 959 |
Add to Cart
|
5 days [Need to translate]
|
[Including 2017XG1] China Compulsory Certification Implementation Rules - Motorcycle Engine
| |
CNCA C11-03-2014
|
PDF similar to CNCA C11-03-2014
Standard similar to CNCA C11-03-2014 GB/T 20076 QC/T 793 QC/T 818 Basic data | Standard ID | CNCA C11-03-2014 (CNCA-C11-03-2014) | | Description (Translated English) | [Including 2017XG1] China Compulsory Certification Implementation Rules - Motorcycle Engine | | Sector / Industry | China Compulsory Certification (CCC) Implementation Rules | | Classification of Chinese Standard | T81 | | Classification of International Standard | CNCA 2014 No. 31 Announcement | | Word Count Estimation | 30,346 | | Date of Issue | 8/21/2014 | | Date of Implementation | 1/1/2015 | | Older Standard (superseded by this standard) | CNCA 02C-025-2008 | | Regulation (derived from) | CNCA 2014 No. 31 Announcement | | Issuing agency(ies) | China National Accreditation Administration for Certification and Accreditation | | Summary | This standard specifies the China Compulsory Certification (CCC) implementation rules for Motorcycle Engine. This standard defines the Motorcycle Engine's certification unit; certification entrusting; document requirements; sample requirements; certificat | CNCA C11-03-2014: [Including 2017XG1] China Compulsory Certification Implementation Rules - Motorcycle Engine
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
CNCA -C11-03-2014
Number. CNCA -C11-03.2014
Mandatory product certification and implementation rules
Motorcycle Engine
Issued on. 2014-08-21
2015-01-01 implementation
China Certification and Accreditation Administration Commission issued
table of Contents
0 .1 Introduction
1 Scope 1
2 Terms and definitions .1
3 Standards for Certification 1
4 .2 authentication mode
5 certified application unit 2
6 .2 for Certification
6.1 certification commission proposed and accepted 2
Profile 6.2 certification commission .. 3
6.3 Implementation Arrangements 3
7 .3 Certification
7.1 Type test 3
7.2 Initial factory inspection ..5
7.3 pairs of related certification results admissible .7
7.4 Evaluation and Certification decisions ..7
7.5 Time frame for certification 7
Up inspection after 8 .7
.7 8.1 certified follow-up examination after
8.2 production site sample or to check 8
8.3 Market sampling test or inspection .8
8.4 Application of the quality of information ..8
Frequency and time 9 8.5 up inspection
8.6 Follow-up inspection records ..9
8.7 Evaluation of the results of follow-up inspection .9
9 certification .9
Holding certificates ..9 9.1
9.2 Certification content ..9
Change 9.3 Certificate 10
Pause 9.4 certificates, cancellation and withdrawal .10
9.5 Use of certificates 10
10 certification mark ..11
11 charges ..11
12 certification responsibilities ..11
13 Certification Rules ..12
Annex 1 and type tests according to the standard .13
Annex 2 Certification delegate data 14
Annex 3 Conformity of Production requirements ..27
0 Introduction
The rules are based on security risks and risk certification motorcycle engine product development, provides packet
Including the implementation of the basic principles of mandatory certification within its scope of application and all motorcycle engines
Requirements, its purpose is to ensure that certified products continue to meet the engine motorcycle laws, regulations and standards to
begging.
The rules and CNCA issued a "compulsory product certification and implementation rules, the company points
Class management, authentication mode selection and determination "," compulsory product certification and implementation rules, the company seized
Resources and measure results using other authentication "," compulsory product certification rules through factory inspection
With the requirements "and supporting the use of general implementing rules.
The certification body should be based on common rules and requirements for the implementation of these rules, combined with production enterprises classified tube
Management, preparation of certification implementation rules, supporting the implementation of common rules and common implementation of these rules.
Manufacturers should ensure that certified products can continue to meet the applicable standards and certification
begging.
1 Scope
These rules apply to travel on Chinese highways and urban road motorcycles engine
product.
Since laws and regulations or relevant product standards, technology, industrial policy and other factors cited changes
From the scope of adjustments should be based on the CNCA announcement shall prevail.
For the result of research, testing, and other special reasons for exemption shall apply for certification "Compulsory
Relevant provisions of the certification regulations, "and the implementation of the national commission.
2 Terms and definitions
Implementing rules CNCA -02C-024.2014 as defined in the motorcycle used by the internal combustion engine.
3 Standards for Certification
Certified according to the rules the criteria in Annex 1 "and type tests according to the standard."
In principle, the certification testing should be performed in accordance with standard national standardization administrative department issued
The latest version when the need to increase the use of new standards or standards applicable to other versions, the country should be recognized
JISC announcement application of the relevant requirements of the standard execution.
4 authentication mode
Basic authentication mode embodiment of the present Rules, corporate integrity is the production of self-discipline, effective management,
Stable production premise, based on the product's features and security risks inherent manufacturers generally use raw
Production processes to determine the authentication mode.
The certification body shall "compulsory product certification and implementation rules production enterprise management, certification
Mode selection and determination "requirement for manufacturers to implement category management, category management combined with results
Increase authentication feature based on the basic authentication mode to determine the applicable certification clients can recognize
Card mode.
Basic Mode. type testing Initial factory inspection (corporate quality assurance and product consistency
Check) certified after supervision
Motorcycle engine manufacturers quality assurance and product consistency check according to the production agreement
Check manner;
Certified as a follow-up examination after supervision mode after granting the certificate, production or port-site inspection or sampling
Charles, market sampling test or inspection in one of three ways, or various combinations thereof.
5 certified application unit
Engine products within the same application unit should meet the following conditions.
(A) belong to the same manufacturer;
(B) have the same maximum displacement, the same duty cycle, the same number of cylinders, the same cooling
①;
Note ①. cooling mode are. natural air cooling, forced air-cooled, water-cooled, oil cooling
(C) having the same ignition mode;
6 for Certification
6.1 certification commission proposed and accepted
Certification principal needs in an appropriate manner to the commission for accreditation certification body. The certification body shall
Certification can be reviewed and certified in accordance with the Regulations of the deadlines or not subject to feedback received
Management information.
Certification principal should be able to assume legal liability related to the quality and the recall, three bags and the like.
The certified motorcycle engine products producers and manufacturers should be able to normal production, and
Consistent with national laws and regulations, otherwise inadmissible certification body commissioned by the relevant certification.
6.2 Information for Certification
The certification body should be based on laws, regulations, standards and certification and implementation of the necessary implementing regulations certification
Clear the certified list of information shall include at least the present Regulations Appendix 2 "certification commission information" requested
content.
Certification Certification principal shall provide the information requested details of delegate lists.
The certification body responsible for the review, management, conservation, confidential information, and sends the data to inform the assessment results
Authentication principal.
6.3 Implementation Arrangements
The certification body and certification should be the principal sides agreed to implement all aspects of the relevant certification and responsibility
Arrangement, and according to their actual production and management of classification, according to the rules and implementation of certification rules
Requirements, determine the authentication implementation of specific programs and inform the client authentication. Authentication package should be at least
Including type testing requirements for initial factory inspection requirements (when applicable).
7 Certification
7.1 Type tests
7.1.1 Type test program
The certification body should develop during the information after examination type test program, and inform the client authentication.
Type test program includes all the requirements and the number of samples, testing standards for type testing project,
Laboratory information.
CNCA certification clients in the specified range can choose laboratory test program
Develop certification should consult the principal opinion.
7.1.2 Type test sample request
Under normal circumstances, according to the principal type test certification program required to prepare the sample to a specified real
Laboratory; if necessary, according to their actual production and management of classification, according to the certification body type test
Site sampling inspection plan calls for a way to obtain a sample and sent to designated laboratories.
Select the sample project to test whether the engine is the same type of decision rules can be determined that
The same type of item can be selected a sample; can not be determined for the same type of projects should be selected separately
Sample test sample, combining all pilot projects corresponding to determine the total number of samples and requirements.
Certification principal shall ensure that the sample provided by the actual production of its products consistent with the certification body
And/or laboratory samples should provide the authenticity of the authentication client for review. Laboratory samples
Authenticity of doubt, it should explain the situation to the certification body, and make the appropriate treatment.
The certification body shall be in accordance with relevant provisions of the documents issued by the CNCA , certification implementing rules
Clear products are key raw materials and spare parts inventory can be accepted and mandatory and voluntary product
Conditions and specific requirements of the type certificate or test report.
7.1.3 Type test project and requirements
Certification agencies, together with the laboratory according to these rules, the commission issued binding authentication client
Motivation is based on testing standards, engine type, structure and technical parameters to identify pilot projects, with
Product under a different type of engine needs additional testing on differences. The rules of the pilot project and the subject
1 "and according to the standard type of pilot projects" measure in accordance with Annex.
For the time due to technological progress, the whole or related systems, parts and components using the new design, new technology,
Producers and/or manufacturers should supply engines to meet the relevant safety standards verification results by the certification
When the determination mechanism, involve significant safety, environmental protection and other projects, the resolution needed by technical experts.
Implementation 7.1.4 type testing
Type test should confirm that the CB certification application materials submitted meet the requirements of the client and
After the development of pilot programs conducted. By the state commission designated laboratory accreditation bodies should be entrusted to sample
Product type testing.
Laboratory type testing samples, should ensure that the detection conclusion is true, accurate, full-detection
Process to make a complete record and archive retained to ensure that the testing process and results records have traceability
Sex.
If the pilot project failed, allowing unqualified after rectification causes analysis, whole
Re-test after the change is complete. If students re-test, the laboratory shall test certification briefing
Agency, reconfirmed pilot program by the certification body.
Conformity assessment system for the recognition of other test results by a certification body in implementing regulations fine
Of the relevant requirements.
As manufacturers have "compulsory product certification and implementation rules and other manufacturers testing resources
Detection condition requires the use of "certification results and certification standards, the certification body can use the production
Detection implement enterprise resource production site sampling (or witness detection) by a designated laboratory
With a test report. The certification body should be clear and specific requirements and certification procedures in implementing regulations.
7.1.5 Type test report
The certification body should specify a uniform type test report format.
After the type test, the laboratory shall inform the certification body type test certification issued by the principal
Inspection report. The test report shall include within the application unit related to certification and product description information. Certification
The Client shall ensure that in the follow-up inspection and certification bodies to be able to provide a complete and effective law enforcement agencies
Type test report.
7.2 Initial factory inspection
Initial factory inspection certification bodies to determine the production capacity of enterprise quality assurance, product consistency
Standards compliance and control on-site inspection and evaluation can meet the certification requirements undertaken.
Initial factory inspection should be carried out after the type test according to type testing and initial work
Factory inspection can be performed simultaneously.
7.2.1 Basic Principles
Producers and manufacturers of these rules shall be in Annex 3 "production conformity inspection requirements," the establishment, in fact,
Shi and maintain the enterprise product consistency and standards compliance control system to ensure that certified products hold
Continued to meet certification requirements.
The certification body shall "compulsory product certification and implementation rules factory quality assurance capability requirements"
And "mandatory product certification and implementation rules factory inspection General requirements" General requirements for the development of motorcycle hair
Motivation Implementing Rules manufacturers factory inspection, factory inspection to ensure that the requirements put in place. Inspection should cover
Cover production sites, the company commissioned by certified products. If necessary, the certification body to be in the company
Outside the places where extended inspections.
Initial factory inspection should be completed within one year on principle after type test, or should re-enter
Line type test.
7.2.2 factory inspection
Press plans to review the conformity of production control production consistency factory site inspection manner.
7.2.2.1 Conformity of Production Control Plan review
Producer or manufacturer shall present Regulations Appendix 3 "production conformity inspection requirements" to develop production
Consistency control plan, and submit the certification body for review. The certification body shall review the results to
enterprise.
When the conformity of production control plan to meet these rules in Annex 3 to review the conformity of production requirements,
Conformity of production control plan under review by. If the certification body that the conformity of production control plan exist
In defect, the factory should be corrective and resubmit. The certification body will re-examine the results of the review to inform recognize
Certificate principal.
If the CB and the producer or the manufacturer for conformity of production control program can not reach a
Cause, producers or production companies agreed to ensure that they meet the certification body and the subsequent product sampling test
Under the premise of the review, the certification body accepted the manufacturer's conformity of production control plan.
After the conformity of production control plan developed by the producer or producers under review by the certification body
Its preparation of production consistency check (factory site inspection) according to the program, the program should include inspection of production
Product, site and scope.
7.2.2.2 checking conformity of production on the factory floor
The certification body should be in the type test and conformity of production control plan passing the examination, delegate
A national compulsory product certification inspector registration qualifications composition of inspection teams, production enterprises
Production site inspection consistency checking.
Inspection, the company should have certified products in production.
7.2.3 Structure and technical parameter checking and inspection
In the factory site inspection, certification bodies can refer to this rule requirements of Annex 3 of Appendix 1 to extract
A corresponding number of product certification commission, and technical parameters of the engine structure and consistency declared nuclear
Correct.
Related Content machine products of the parts, assembly systems or logo on the products and components should CCC
Technical data structure consistent with the certificate or the certification body record.
7.2.4 factory inspection results
Factory inspection found no unqualified items, check the result is qualified;
Factory inspection presence of non-conformance, to allow the certification body will take appropriate corrective manner
Results confirm. Rectification time can not be more than three months, if not complete overdue rectification, or the rectification
Negative results, the test results failed.
Factory inspection found that the conformity of production control plan and the implementation of the declaration and inspection approval
Conformity of production control plan serious deviation, or actual production structure and technical parameters of the engine
When there are significant differences in the type and consistency of the test sample, the test results fail to terminate this examination.
7.2.5 factory inspection time
Factory inspection in accordance with relevant state regulations by the certification body, and out in the implementing regulations
Indeed.
7.3 Admissibility of the relevant certification results
It has been mandatory product certification or recognition of CNCA Voluntary Product Certification section
Parts, assembly, loading only confirmed member, consistency assembly of standard models of the certificate and the certificate
The effectiveness of the book, without sending samples to detect or recover factory inspection.
7.4 Evaluation and Certification decisions
The certification body of type testing, initial factory inspection results and relevant data/information Comprehensive Review
Price, evaluated by press unit issuance of the certificates; evaluation is not passed, the authentication is terminated.
7.5 Time frame for certification
The certification body shall limit certification to make clear that all sectors, and to ensure that related work on time
Limit required to complete Authentication Client shall actively cooperate in certification activities. Under normal circumstances, since the subject
Management certification from the commission to the authentication certificate issued by the client within 90 days.
8 certified after supervision
Follow-up inspection means supervision of certification bodies and manufacturers certified product implementation.
The certification body should be combined with the production of enterprise management and the actual situation, out in the Certification Conditions
After really up inspection requirements for specific mode selection.
Follow-up examination after 8.1 certified
Follow-up inspection principles 8.1.1 Follow-up inspection
The certification body should be based on the classified management, the certified products and their manufacturers to implement effective
The follow-up inspection to verify the manufacturer's quality assurance ability to continue to meet the certification requirements to ensure that eligible
Certified products consistently meet standard requirements and to maintain consistency with the type test sample.
Follow-up inspection Follow-up inspection should be carried out in the production of normal production. For non-continuous production
Product certification body Certification principal shall submit production plans, to facilitate follow-up inspection Follow-up inspection
The effective implementation.
Tracking check the contents 8.1.2 Follow-up inspection
Under the certification body should ensure that the principles of risk control certification, certified in accordance with Annex 3 to develop heel
The specific content of track inspection requirements, and to be clear in certification implementation details.
8.2 production site sample or to check
8.2.1 production site inspection or sample detection principle
Take production site inspection or sample detection mode after the implementation of follow-up inspection, the certification committee
Trustee, producers, production companies should cooperate.
8.2.2 production site sample or to check the contents
The certification body should develop production site in the Regulations in accordance with the classification principles enterprise and product characteristics
Sampling or to check the content and requirements, and to develop according to their specific sampling and testing program, designated
Personnel in production of qualified products (including production line, warehouse or port, etc.) sample. Sample
Products can be used to detect manufacturer testing resources, conditions and requirements of this rule 7.1.4 with provisions.
8.3 Market sampling test or inspection
8.3.1 Market sampling test or inspection principle
Take market sampling test or examination embodiment supervision of certified clients, producers,
Manufacturers should be with, and confirmation samples taken from the market.
8.3.2 Market sampling test or check the contents
The certification body should develop market sampling or to check the content and requirements of the Regulations.
Certification bodies to develop sampling scheme based on product characteristics, the designated person in the market (including
Us...
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of CNCA C11-03-2014_English be delivered?Answer: Upon your order, we will start to translate CNCA C11-03-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of CNCA C11-03-2014_English with my colleagues?Answer: Yes. The purchased PDF of CNCA C11-03-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|