GB/T 5782-2025 PDF English
Price & Delivery
US$380.00 · In stock · Download in 9 secondsGB/T 5782-2025: Fasteners - Hexagon head bolts
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
GB/T 5782: Historical versions
| Standard ID | USD | BUY PDF | Delivery | Standard Title (Description) | Status |
| GB/T 5782-2025 | 380 | Add to Cart | Auto, 9 seconds. | Fasteners - Hexagon head bolts | Valid |
| GB/T 5782-2016 | 85 | Add to Cart | Auto, 9 seconds. | Hexagon head bolts | Valid |
| GB/T 5782-2000 | 519 | Add to Cart | 3 days | Hexagon head bolts | Obsolete |
| GB/T 5782-1986 | RFQ | ASK | 3 days | Hexagon head bolts--Product grades A and B | Obsolete |
Click to Preview this PDF
GB/T 5782-2025: Fasteners - Hexagon head bolts
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT5782-2025GB NATIONAL STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA ICS 21.060.10 CCS J 13 Replacing GB/T 5782-2016 Fasteners - Hexagon head bolts (ISO 4014.2022, Fasteners - Hexagon head bolts - Product grades A and B, MOD) Issued on: OCTOBER 31, 2025 Implemented on: FEBRUARY 1, 2026 Issued by. State Administration for Market Regulation; Standardization Administration of PRC.
Table of Contents
Foreword... 3 1 Scope... 7 2 Normative references... 7 3 Terms and definitions... 8 4 Types and dimensions... 8 5 Technical requirements... 15 6 Marking and labeling... 17 7 Designation... 18 Appendix A (Normative) Dimensions for M1.6~M14 bolts of product grade B... 19 References... 21Foreword
This document was drafted in accordance with the provisions of GB/T 1.1-2020 Directives for standardization - Part 1.Rules for the structure and drafting of standardizing documents. This document replaces GB/T 5782-2016 Hexagon head bolts. Compared with GB/T 5782-2016, apart from structural adjustments and editorial changes, the main technical changes are as follows. a) The M7 size has been added (see Table 2). b) For d≤M5, dw,min has been changed from smin-IT16 to smin-IT15 to obtain a larger bearing area, thereby reducing contact pressure (see Tables 1 and 2; see Table 1 of the 2016 edition). c) Rules for the minimum and maximum standard lengths have been added, and the minimum and maximum standard lengths have been adjusted accordingly (see Figure 1, Table 1~Table 6, Table A.1 and Table A.2). d) The property classes, 4.8 and 12.9/12.9, of steel bolts have been added (see Table 7). e) Stainless steel bolt grades D4 and D6 and property class 80 have been added (see Table 7). f) Property class 9.8 and non-ferrous metal bolts have been deleted (see Table 3 of the 2016 edition). g) The technical requirements for hot-dip galvanizing have been added according to GB/T 5267.3 (see Table 7). h) The marking and labeling have been added (see Chapter 6). This document is modified in relation to ISO 4014.2022 Fasteners - Hexagon head bolts - Product grades A and B. The technical differences between this document and ISO 4014.2022, and the reasons therefor, are as follows. -- ISO 225 has been replaced with the normatively referenced GB/T 5276 to adapt to China's technical requirements (see Chapter 4). -- ISO 4753 has been replaced with the normative reference GB/T 2 to adapt to China's technical conditions (see Figure 1). Fasteners - Hexagon head bolts1 Scope
This document specifies the type, dimensions, technical requirements, marking, labeling, and designation for hexagon head bolts of product grades A and B. This document applies to hexagon head bolts (hereinafter referred to as "bolts") made of steel and stainless steel with thread sizes from M1.6 to M64, coarse threads, property classes of 4.8, 5.6, 8.8, 10.9, 12.9/12.9, A2-50, A2-70, A4-50, A4-70, A4-80, D4-70, D4-80, D6-70, and D6-80, and product grades of A and B.2 Normative references
The provisions of the following documents constitute the essential clauses of this document through normative references in this text. Among them, for any dated reference, only the version corresponding to that date applies to this document; for any undated reference, the latest version (including all amendments) applies to this document. GB/T 2 Fasteners - Ends of parts with external thread (GB/T 2-2016, ISO 4753.2011, MOD) GB/T 90.1 Fasteners - Acceptance inspection (GB/T 90.1-2023, ISO 3269.2019, MOD) GB/T 90.2 Fasteners - Marking and packaging GB/T 197 General purpose metric screw threads - Tolerances (GB/T 197-2018, ISO 965-1.2013, MOD) GB/T 1237 Designation system for fasteners (GB/T 1237-2000, eqv ISO 8991.1986) GB/T 3098.1 Mechanical properties of fasteners - Bolts, screws and studs (GB/T 3098.1-2010, ISO 898-1.2009, MOD) GB/T 3098.6 Mechanical properties of fasteners - Stainless steel bolts, screws and studs (GB/T 3098.6-2023, ISO 3506-1.2020, MOD) GB/T 3098.23 Mechanical properties of fasteners - M42~M72 bolts, screws and studs GB/T 3099.4 Terminology of fasteners - Control, inspection, delivery, acceptance and quality (GB/T 3099.4-2021, ISO 1891-4.2018, MOD) GB/T 3103.1 Tolerances for fasteners--Bolts, screws, studs and nuts (GB/T 3103.1- 2002, idt ISO 4759-1.2000) GB/T 3106 Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (GB/T 3106-2016, ISO 888.2012, MOD) GB/T 5267.1 Fasteners - Electroplate coating (GB/T 5267.1-2023, ISO 4042.2022, MOD) GB/T 5267.2 Fasteners - Non-electrolytically applied zinc flake coatings (GB/T 5267.2-2021, ISO 10683.2018, MOD) GB/T 5267.3 Fasteners - Hot dip galvanized coatings (GB/T 5267.3-2008, ISO 10684.2004, IDT) GB/T 5276 Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions (GB/T 5276-2015, ISO 225.2010, MOD) GB/T 5779.1 Fasteners - Surface discontinuities - Bolts, screws and studs for general requirements (GB/T 5779.1-2000, idt ISO 6157-1.1988) GB/T 5779.3 Fasteners - Surface discontinuities - Bolts, screws and studs for special requirements (GB/T 5779.3-2000, idt ISO 6157-3.1988) GB/T 16938 Fasteners - General requirements for bolts, screws, studs and nuts (GB/T 16938-2008, ISO 8992.2005, IDT)3 Terms and definitions
This document does not contain any terms or definitions that need to be defined.4 Types and dimensions
The types of bolts shall be as shown in Figures 1 and 2, and the dimensions shall be as shown in Table 1~Table 6. Symbols and descriptions of dimensions shall conform to GB/T 5276. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
