GB/T 38608-2020 PDF English
Price & Delivery
US$185.00 · In stock · Download in 9 secondsGB/T 38608-2020: Method for Determination of the Volatile Organic Compounds (VOCs) Content in the Ink
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
| Standard ID | USD | BUY PDF | Delivery | Standard Title (Description) | Status |
| GB/T 38608-2020 | 185 | Add to Cart | Auto, 9 seconds. | Method for Determination of the Volatile Organic Compounds (VOCs) Content in the Ink | Valid |
Click to Preview this PDF
Similar standards
GB/T 38608-2020: Method for Determination of the Volatile Organic Compounds (VOCs) Content in the Ink
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT38608-2020
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 87.080 Y 44 Method for Determination of the Volatile Organic Compounds (VOCs) Content in the Ink Issued on. MARCH 31, 2020 Implemented on. OCTOBER 1, 2020 Issued by. State Administration for Market Regulation; Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 3 1 Scope... 4 2 Normative References... 4 3 Terms and Definitions... 4 4 Determination Method... 5 5 Test Report... 5 Appendix A (normative) Determination Method of VOCs Content in Ink - Difference Method... 7 Appendix B (normative) Determination Method of VOCs Content in Ink - Gas Chromatography... 10 Bibliography... 17Foreword
This Standard was drafted in accordance with the rules in GB/T 1.1-2009. This Standard was proposed by China National Light Industry Council. This Standard shall be under the jurisdiction of National Technical Committee 127 on Printing Ink of Standardization Administration of China (SAC/TC 127). The drafting organizations of this Standard. Beijing Institute of Graphic Communication; Bauhinia Variegata Ink & Chemicals Limited; Shanxi Jinghuake Trade Co., Ltd.; New East Ink Co., Ltd.; Chengdu Tuozhan New Material Co., Ltd.; Hangzhou Toka Ink Chemical Co., Ltd.; Suzhou Bolaite New Material Co., Ltd.; Guangdong Sky Dragon Printing Ink Group Co., Ltd.; Tianjin TOYO Ink Co., Ltd.; Huangshan Shining Ink Co., Ltd.; Shenzhen Bright Ink and Coating Co., Ltd. The main drafters of this Standard. Huang Beiqing, Wu Shaotang, Wang Chongsheng, Liu Guowen, Wang Qiang, Ma Zhiqiang, Li Guangming, Yu Zhonghua, Ye Ning, Wang Jianzhong, Zhang Fengnian. Method for Determination of the Volatile Organic Compounds (VOCs) Content in the Ink1 Scope
This Standard specifies the determination method and test report of the volatile organic compounds (VOCs) content in ink and similar products. This Standard is applicable to various types of ink and similar products.2 Normative References
The following documents are indispensable to the application of this document. In terms of references with a specified date, only versions with a specified date are applicable to this document. In terms of references without a specified date, the latest version (including all the modifications) is applicable to this document. GB/T 3186-2006 Paints, Varnishes and Raw Materials for Paints and Varnishes - Sampling GB/T 6283-2008 Chemical Products - Determination of Water Karl Fischer Method (general method) GB/T 23993-2009 Determination of Formaldehyde Content of Waterborne Coatings - Spectrophotometric Method with Acetylacetone GB/T 32710.10-2016 Safety Requirements for Environmental Testing and Conditioning Equipment - Part 10.Electric Gravity Convection Ovens and Forced Ventilation Ovens3 Terms and Definitions
The following terms and definitions are applicable to this document. 3.1 Ink Ink refers to a dispersion system composed of colorants, binders and auxiliary agents; a coloring substance that is transferred to the substrate during the printing process. [GB/T 15962-2018, Definition 2.1] 3.2 Volatile Organic Compounds; VOCs Volatile organic compounds refer to any organic compounds whose initial boiling point is lower than or equal to 250 °C under the standard pressure of 101.3 kPa.4 Determination Method
4.1 This Standard assumes that the volatile matters are water and organic compounds. When the expected VOCs content (mass fraction) in the ink is greater than 5%, the content of volatile organic compounds in the product is determined through the difference method. 4.2 This Standard assumes that the volatile matters are water and organic compounds. When the expected VOCs content (mass fraction) in the ink is smaller than or equal to 15%, the content of volatile organic compounds in the product is determined through the gas chromatography. The method shall comply with Appendix B.5 Test Report
The test report shall at least include the following content.Appendix A
(normative) Determination Method of VOCs Content in Ink - Difference Method A.1 Principle Weigh-take a certain amount of ink; at a prescribed or agreed temperature, heat it up to a constant weight. After deducting the moisture content, the lost mass is the content of volatile organic compounds. A.2 Equipment A.2.1 Utensils. aluminum foil box 40 mm 40 mm 10 mm, or, select other suitable utensils in accordance with the demands. A.2.2 Blast constant-temperature oven. constant-temperature fluctuation. ± 2 °C. In order to guarantee the safety of the test, a forced convection oven shall be selected, and the test shall be performed under secure conditions. Warning---in order to prevent explosion or fire, samples containing flammable and volatile substances shall be handled with care and implemented in accordance with GB/T 32710.10-2016. A.3 Test Methods A.3.1 Sampling Sampling shall be performed in accordance with the method specified in GB/T 3186- 2006. A.3.2 Determination of non-volatile matter content In the oven, dry the used utensils and paper clips, then, cool them down to room temperature. Weigh-take a utensil with paper clips, accurate to 0.1 mg. Then, with the same precision, weigh-take and add around (1.5 ± 0.1) g (or take an appropriate mass as required) of sample. In addition, disperse the sample as evenly as possible in the container (in terms of high-viscosity or crust samples, a paper clip may be used to flatten the sample in the container). A.3.3 Determination of moisture content In accordance with the method provide in GB/T 6283-2008, determine the moisture content, which shall be expressed in mass fraction. Choose Karl Fischer reagents that would not be interfered by compounds contained in the sample. If the compounds are unknown, the method provided in B.5.2 may be used for qualitative identification. A.3.4 Calculation The content of non-volatile matters in the ink sample shall be calculated in accordance with Formula (A.1). ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
