GB/T 33217-2016 PDF English
Price & Delivery
US$110.00 · In stock · Download in 9 secondsGB/T 33217-2016: Burr height for stampings
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
| Standard ID | USD | BUY PDF | Delivery | Standard Title (Description) | Status |
| GB/T 33217-2016 | 110 | Add to Cart | Auto, 9 seconds. | Burr height for stampings | Valid |
Click to Preview this PDF
Similar standards
GB/T 33217-2016: Burr height for stampings
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT33217-2016GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 25.010 J 32 Burr height for stampings ISSUED ON: DECEMBER 13, 2016 IMPLEMENTED ON: JULY 01, 2017 Issued by: General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3 1 Scope ... 4 2 Terms and definitions ... 4 3 Limit value of the burr height ... 4 4 Detection ... 5 Burr height for stampings1 Scope
This Standard specifies the limit value and detection of the burr height for stampings. This Standard applies to metal stampings that have certain requirements for burr height.2 Terms and definitions
The following terms and definitions are applicable to this document. 2.1 Burr of stamping The burr that is left on the section of the stamping when the sheet is cut or blanked, which is shown in Figure 1. Notes: h -- burr height; b -- material thickness of the stamping. Figure 1 -- Section of the stamping3 Limit value of the burr height
The limit value of the burr height for stampings is in accordance with the regulations in Table 1. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.