Home Cart Quotation Policy About-Us
www.ChineseStandard.net
Database: 221581 (27 Mar 2026)
SEARCH
Path: Home > GB/T > Page349 > GB/T 13822-2017

GB/T 13822-2017 PDF English

Price & Delivery

US$100.00 · In stock · Download in 9 seconds
GB/T 13822-2017: Test specimens for nonferrous diecasting alloys
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

GB/T 13822: Historical versions

Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 13822-2017100 Add to Cart Auto, 9 seconds. Test specimens for nonferrous diecasting alloys Valid
GB/T 13822-1992199 Add to Cart 2 days Test specimens for non-ferrous diecasting alloys Obsolete

Click to Preview this PDF

GB/T 13822-2017: Test specimens for nonferrous diecasting alloys

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT13822-2017
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.120.01 J 31 Replacing GB/T 13822-1992 Test specimens for nonferrous diecasting alloys ISSUED ON: DECEMBER 29, 2017 IMPLEMENTED ON: DECEMBER 29, 2017 Issued by: General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the People’s Republic of China.

Table of Contents

Foreword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Type and size of test specimens ... 4 4 Requirements ... 5 Appendix A (Informative) Process diagram of test specimens for nonferrous diecasting alloys ... 7 Appendix B (Informative) Diecasting process parameter table of test specimens for nonferrous diecasting alloys ... 9

Foreword

This Standard was drafted in accordance with the rules given in GB/T 1.1-2009. This Standard replaces GB/T 13822-1992 Specimens for nonferrous diecasting alloys. Compared with GB/T 13822-1992, the major changes of this Standard are as follows: -- Modify the pouring system and exhausting system of the process diagram of test specimens for diecasting alloys, to be closer to the actual diecasting production; -- Modify the arrangement of test specimens on the diecasting process diagram; -- Add that diecasting enterprises can adjust diecasting process parameters according to actual production conditions. This Standard shall be under the jurisdiction of National Technical Committee 54 on Foundry of Standardization Administration of China (SAC/TC 54). The organization responsible for the drafting of this Standard: Guangdong Hongtu (Nantong) Die-casting Co., Ltd. Organizations participating in the drafting of this Standard: Zhejiang Huashuo Technology Co., Ltd., CITIC Dicastal Co., Ltd., Sanmenxia Dicastal Wheel Manufacturing Co., Ltd., Baoji Titanium Industry Co., Ltd., Xiongbang Die Casting (Nantong) Co., Ltd., Dongfeng (Shiyan) Nonferrous Castings Co., Ltd. Chief drafting staffs of this Standard: Chang Yiqian, Jiang Xiaoyan, Wang Hongbiao, Wu Qunhu, Li Guowei, Ma Zhongxian, Gao Junmin, Yang Zhaoling, Zhang Zhenglai, Ma Chao, Qiao Wenming, Feng Junning. The historical version replaced by this Standard is: -- GB/T 13822-1992. Test specimens for nonferrous diecasting alloys

1 Scope

This Standard specifies the type, size and requirements of test specimens for nonferrous diecasting alloys. This Standard applies to the preparation of test specimens for mechanical property of nonferrous diecasting alloys.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies to this document. For undated references, the latest edition (including any amendment) applies to this document. GB/T 231.1, Metallic materials - Brinell hardness test - Part 1: Test method

3 Type and size of test specimens

3.1 Tensile test specimen 3.1.1 Type A tensile test specimen Type A tensile test specimen – whose shape and size shall comply with the regulations in Figure 1 – applies to the determination of tensile strength, yield strength and elongation of nonferrous diecasting alloys under different heat treatment states. in millimeters for nonferrous diecasting alloys. Diecasting enterprises can choose in Appendix A and adjust the diecasting process parameters in Appendix B according to actual production conditions. 4.2 The impact of low-speed diecasting, vacuum diecasting and other processes on the preparation of test specimens are not taken into account in this Standard. If necessary, the supplier and the purchaser can negotiate and agree on various technical requirements in the preparation process of test specimens. 4.3 The test specimen shall be cast from nonferrous metal molten in the same batch as the die casting. 4.4 The test specimen shall be cleaned of burrs, and shall not be bent and straightened. According to the requirements of the delivery state of the casting, the same heat treatment process shall be adopted for the test specimen and the casting. 4.5 The non-clamping part of the test specimen shall not have defects such as ejector pin marks, scratches, pockmarks, cold shuts, cracks, inclusions and surface holes. 4.6 The two ends of the test specimen shall be ground and smoothed, and the feed port and slag bag port shall be removed. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 13822-2017 be delivered?Answer: The full copy PDF of English version of GB/T 13822-2017 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 13822-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13822-2017_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 13822-2017 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version GB/T 13822-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13822-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of GB/T 13822-2017?

A step-by-step guide to download PDF of GB/T 13822-2017_EnglishStep 1: Visit website ChineseStandard.net (Pay in USD), or ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 13822-2017".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 And 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe Or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment Is completed And in 9 seconds, you will receive 2 emails attached with the purchased PDFs And PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs And invoice.
Refund Policy Privacy Policy Terms of Service