GB/T 12113-2023 PDF English
Price & Delivery
US$905.00 · In stock · Download in 9 secondsGB/T 12113-2023: Methods of measurement of touch current and protective conductor current
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
GB/T 12113: Historical versions
| Standard ID | USD | BUY PDF | Delivery | Standard Title (Description) | Status |
| GB/T 12113-2023 | 905 | Add to Cart | Auto, 9 seconds. | Methods of measurement of touch current and protective conductor current | Valid |
| GB/T 12113-2003 | 225 | Add to Cart | Auto, 9 seconds. | Methods of measurement of touch current and protective conductor current | Obsolete |
| GB/T 12113-1996 | RFQ | ASK | 4 days | Methods of measurement of touch-current and protective conductor current | Obsolete |
| GB 12113-1989 | RFQ | ASK | 3 days | Measurement of touch-current and earth wire current | Obsolete |
Click to Preview this PDF
Similar standards
GB/T 12113-2023: Methods of measurement of touch current and protective conductor current
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT12113-2023GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 35.020 CCS L 09 GB/T 12113-2023 / IEC 60990.2016 Replacing GB/T 12113-2003 Methods of Measurement of Touch Current and Protective Conductor Current (IEC 60990.2016, IDT) Issued on: SEPTEMBER 7, 2023 Implemented on: APRIL 1, 2024 Issued by. State Administration for Market Regulation; Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 4 Introduction... 5 1 Scope... 8 2 Normative References... 9 3 Terms and Definitions... 9 4 Test Site... 10 4.1 Test site environment... 10 4.2 Test transformer... 10 4.3 Earthed neutral conductor... 11 5 Measuring Equipment... 12 5.1 Selection of measuring network... 12 5.2 Test electrodes... 14 5.3 Configuration... 14 5.4 Power connections during test... 14 5.5 Supply voltage and frequency... 20 6 Test Procedure... 21 6.1 General... 21 6.2 Normal and fault conditions of equipment... 22 7 Evaluation of Results... 24 7.1 Perception, startle-reaction and let-go-immobilization... 24 7.2 Electric burn... 24 8 Measurement of Protective Conductor Current... 25 8.1 General... 25 8.2 Multiple equipment... 25 8.3 Measuring method... 25 Annex A (Normative) Equipment... 26 Annex B (Normative) Use of a Conductive Plane... 28 Annex C (Normative) Incidentally Connected Parts... 29 Annex D (Informative) Choice of Current Limits... 30 Annex E (Informative) Networks for Use in Measurement of Touch Current... 34 Annex F (Informative) Measuring Network Limitations and Construction... 36Foreword
This Document was drafted as per the rules specified in GB/T 1.1-2020 Directives for Standardization – Part 1.Rules for the Structure and Drafting of Standardizing Documents. This Document replaced GB/T 12113-2003 Methods of Measurement of Touch Current and Protective Conductor Current. Compared with GB/T 12113-2003, the major technical changes of this Document are as follows besides the structural adjustments and editorial modifications. --- Delete the understanding based on the current effects; reduce the reference of quotation of use conditions of “grippable components” (see 3.4 and Annex H of 2003 Edition). This Document equivalently adopted IEC 60990.2016 Methods of Measurement of Touch Current and Protective Conductor Current. Please note some contents of this Document may involve patents. The issuing agency of this Document shall not assume the responsibility to identify these patents. This Document was proposed by and under the jurisdiction of Ministry of Industry and Information Technology of the People’s Republic of China. Drafting organizations of this Document. China Electronics Standardization Institute; Vertiv Co., Ltd.; Beijing Xiaomi Mobile Software Co., Ltd.; Vivo Mobile Communications Co., Ltd.; Zhongshan Baolijin Electronic Co., Ltd.; Unisyue Technologies Co., Ltd.; Qingdao Haier Multimedia Co., Ltd.; Shenzhen Skyworth Digital Technology Co., Ltd.; Ningbo Bull Digital Technology Co., Ltd.; Hisense Group Holdings Co., Ltd.; China National Accreditation Service for Conformity Assessment; OPPO Guangdong Mobile Communications Co., Ltd.; Shenzhen SaiXi Information Technology Co., Ltd.; Dongguan Aohai Technology Co., Ltd.; CESI (Guangzhou) Standards & Testing Institute Co., Ltd.; Xiamen Hanin Electronic Technology Co., Ltd.; and Honor Device Co., Ltd. Chief drafting staffs of this Document. Li Yuzhen, Chen Di, Wang Ying, He Penglin, Liu Yunzhu, Chan Xiaoxiao, Zhang Guanghui, Wang Houxue, Lin Junrong, Wang Zongqiang, Wang Qingwang, Liu Fenglei, Yu Mouzhan, Cui Zhilong, Song Wenping, Chen Shaoyi, Liu Nianfeng, Guo Xiugen, Zhou Hui, Bai Zhongtao, Huang Junying, Wu Chunyu, Lin Jingyi, and Li Jianmin. This Document was first-time published in 1996; first-time revised in 2003; and it is second- time revised hereby. Methods of Measurement of Touch Current and Protective Conductor Current1 Scope
This Standard defines measurement methods for – d.c. or a.c. current of sinusoidal or non-sinusoidal waveform, which could flow through the human body, and – current flowing through a protective conductor. The measuring methods recommended for TOUCH CURRENT are based upon the possible effects of current flowing through a human body. In this standard, measurements of current through networks representing the impedance of the human body are referred to as measurements of TOUCH CURRENT. These networks are not necessarily valid for the bodies of animals. The specification or implication of specific limit values is not within the scope of this standard. IEC 60479 series provide information regarding the effects of current passing through the human body from which limit values may be derived. This standard is applicable to all classes of EQUIPMENT, according to IEC 61140. The methods of measurement in this standard are not intended to be used for – TOUCH CURRENTS having less than 1 s duration, – patient currents as defined in IEC 60601-1, – a.c. at frequencies below 15 Hz, and – currents above those chosen for ELECTRIC BURN limits. This basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51.It is not intended for use by manufacturers or certification bodies independent of product standards. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication only apply when specifically referred to or ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
