GB 25585-2010 PDF English
Price & Delivery
US$170.00 · In stock · Download in 9 secondsGB 25585-2010: National food safety standards of food additive potassium chloride
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
| Standard ID | USD | BUY PDF | Delivery | Standard Title (Description) | Status |
| GB 25585-2010 | 170 | Add to Cart | Auto, 9 seconds. | National food safety standards of food additive potassium chloride | Valid |
Click to Preview this PDF
GB 25585-2010: National food safety standards of food additive potassium chloride
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB25585-2010GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA National food safety standard - Food additive - Potassium chloride ISSUED ON: DECEMBER 21, 2010 IMPLEMENTED ON: FEBRUARY 21, 2011 Issued by: Ministry of Health of the People's Republic of China
Table of Contents
Foreword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Molecular formula and relative molecular mass ... 4 4 Technical requirements ... 4 Appendix A (Normative) Test methods ... 6 National food safety standard - Food additive - Potassium chloride1 Scope
This Standard applies to potassium chloride produced from rock salt carnallite or sea salt with magnesium chloride and potassium chloride as main components, and potassium chloride obtained through refining as a food additive.2 Normative references
The documents referenced in this Standard are indispensable for the application of this Standard. For dated references, only the dated edition applies to this Standard. For undated references, the latest edition (including all amendments) applies to this Standard.3 Molecular formula and relative molecular mass
3.1 Molecular formula KCl 3.2 Relative molecular mass 74.55 (according to the international relative atomic mass in 2007)4 Technical requirements
4.1 Sensory requirements: shall meet the requirements of Table 1. 4.2 Physical and chemical indicators: shall meet the requirements of Table 2.Appendix A
(Normative) Test methods A.1 Warning Some of the reagents used in the test methods of this Standard are toxic or corrosive, and they must be handled with care! If it is splashed on the skin, use water to rinse it immediately. If it is serious, seek medical attention immediately. When using volatile acids, work in a fume hood. A.2 General The reagents and water used in the test methods of this Standard, unless otherwise specified, refer to analytically pure reagents and grade-III water specified in GB 6682- 2008. The standard solutions, impurity standard solutions, preparations and products required in the tests of this Standard shall be prepared in accordance with the provisions of HG/T 3696.1, HG/T 3696.2 and HG/T 3696.3 unless other requirements are specified. A.3 Identification test A.3.1 Identification of potassium ions Weigh about 2 g of the sample; place it in a beaker; add about 10 mL of water to dissolve it. Soak the platinum wire of a glass rod (with a platinum wire ring on the top) in hydrochloric acid and burn it on a flame until it becomes colorless; then, dip it in a small amount of test solution and burn it on a flame. It shall show a purple flame under the cobalt glass. A.3.2 Identification of chloride ions Take the sample solution (A.3.1) and add silver nitrate solution (10 g/L) to produce a white precipitate which is insoluble in nitric acid. A.4 Determination of potassium chloride A.4.1 Method summary Same as Chapter 2 of GB/T 3050-2000. A.4.2 Reagents and materials A.4.2.1 Nitric acid solution: 1+1. A.4.2.2 Saturated potassium nitrate solution. A.4.2.3 Bromophenol blue indicator solution: 1 g/L ethanol solution. A.4.2.4 Silver nitrate standard titration solution: c(AgNO3) ≈ 0.1 mol/L. A.4.3 Instruments and apparatuses A.4.3.1 Potentiometer: The graduation value is 2 mV and the range is -500 mV ~ +500 mV. A.4.3.2 Reference electrode: double liquid junction saturated calomel electrode. A.4.3.3 Measuring electrode: silver electrode. A.4.4 Analysis steps Weigh about 0.25 g of the sample dried for 2 h according to A.5, accurate to 0.0001 g; place it in a 100 mL beaker; add 40 mL of water to dissolve; add 1 drop of bromophenol blue indicator solution; add 1 to 2 drops of nitric acid solution to make the solution just yellow; use a standard silver nitrate titration solution with a concentration of about 0.1 mol/L; follow the steps in 4.6 of GB/T 3050-2000 starting from "Put in an electromagnetic stirrer..."; record the total volume and corresponding potential value after each addition of the standard silver nitrate titration solution; calculate the volume (V) of the standard silver nitrate titration solution consumed by the titration to the endpoint. A.4.5 Result calculation The potassium chloride content is calculated based on the mass fraction w1 of potassium chloride (KCl), and the value is expressed in %, calculated according to Formula (A.1): Where: V – the value of the volume of the silver nitrate standard titration solution consumed in the titration, in milliliters (mL); c – the exact value of the concentration of the silver nitrate standard titration solution, in moles per liter (mol/L); w0 – the value of the mass fraction of the loss on drying measured in A.5, expressed in %; m – the value of the sample mass, in grams (g); M – the value of the molar mass of potassium chloride (KCl), in grams per mole (g/mol) (M = 74.55). A.6.2 Analysis steps Weigh about 5 g of the sample and dissolve it in 50 mL of freshly prepared carbon dioxide-free water. After adding 3 drops of phenolphthalein indicator solution, the solution shall not show pink. After adding 0.3 mL of sodium hydroxide standard titration solution, the test solution shall show pink. A.7 Determination of iodine and bromine A.7.1 Reagents and materials A.7.1.1 Trichloromethane. A.7.1.2 Sodium hypochlorite solution. A.7.2 Analysis steps Weigh 2 g of the sample to an accuracy of 0.01 g; place it in a 25 mL colorimetric tube; add 6 mL of water and dissolve. Add 1 mL of trichloromethane; then, dropwise add 5 mL of sodium hypochlorite solution while shaking the colorimetric tube. The trichloromethane layer shall not show any temporary purple or permanent orange color. A.8 Determination of sodium A.8.1 Reagents and materials A.8.1.1 Hydrochloric acid: guaranteed reagent. A.8.1.2 Stock solution of sodium standard solution: 1 mL of solution contains 0.1 mg of sodium (Na). Preparation: Use a pipette to transfer 10 mL of the sodium standard solution prepared according to HG/T 3696.2 into a 100 mL volumetric flask; dilute to the mark; shake well. A.8.1.3 Sodium standard solution: 1 mL of solution contains 0.01 mg of sodium (Na). Preparation: Use a pipette to transfer 10 mL of sodium standard solution stock solution (A.8.1.2) into a 100 mL volumetric flask; dilute to the mark; shake well. A.8.1.4 Cesium chloride solution: 20 g/L. Weigh 2 g of cesium chloride (spectrally pure); place it in a 100 mL beaker; add an appropriate amount of water to dissolve it completely; use water to dilute to 100 mL; shake well. Store in plastic bottles. A.8.1.5 Acetylene: high purity. A.8.1.6 Water: Grade-II water in accordance with GB/T 6682-2008. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
