GB/T 30512-2014 PDF EnglishUS$70.00 · In stock · Download in 9 seconds
GB/T 30512-2014: Requirements for prohibited substances on automobiles Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 30512-2014: Requirements for prohibited substances on automobiles---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT30512-2014GB ICS 43.020 T 40 NATIONAL STANDARD Requirements for prohibited substances on automobiles Issued on: FEBRUARY 19, 2014 Implemented on: JUNE 1, 2014 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China; Standardization Administration of the People’s Republic of China. Table of ContentsForeword... 3 Introduction... 4 1 Scope... 5 2 Normative references... 5 3 Terms and definitions... 5 4 Scope of prohibited substances... 5 5 Detection methods of prohibited substances... 7 6 The transitional period requirements implemented by the standard... 7 Appendix A... 8ForewordThis Standard is drafted according to the rules specified in GB/T 1.1-2009. This Standard was proposed by National Development and Reform Commission. This Standard shall be under the jurisdiction of the National Technical Committee of Auto Standardization (SAC/TC 114). The drafting organizations of this Standard. Dongfeng Motor Group Company Limited, China Automotive Technology and Research Center, Chery Automobile Company Limited, and Nanjing Automobile Group Co., Ltd. The main drafters of this Standard. Zhang Yunsheng, Song Xianzhi, Liu Xianghai, Guo Miao, Zhang Chunrong, Bao Xuepeng, and Zhang Jiamin.IntroductionIn order to adapt to develop the circular economy of our nation, to protect the environment and human health, to meet the demands of building a resource-saving and environment-friendly society, and to improve the technical level of domestic sales of vehicles, this Standard is hereby formulated. This Standard is intended to enable the domestic automobile manufacturers and automobile import agents to prohibit the use of lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and poly brominated diphenyl ethers in the research and development, production, importation, marketing and other channels of automobile products. Restriction requirements on other hazardous substances in this Standard are not specified. This Standard has fully considered the technical capacity and feasibility on implementing the standard of automobile industry in the formulation process, as well as the supervision and inspection capacity of domestic related institutions, based on the standard to automobile products. The technical provisions and requirements of the standard shall be consistent with China’s recycling technical policy and related management methods as much as possible and close to the internationally acceptable technical regulations. At the same time, when determining the technical requirements, technical indicators and the exemption deadline of the standard, it shall fully considered China’s economic development level and production level, technical capacity and product status of automobile industry. Limit indicators of prohibited substances and exempt automotive materials and parts list at a given period are formed and based on the sampling inspection and verification of domestic automobile parts products. National Technical Committee of Auto Standardization will timely modify and adjust the scope, content requirements, exemption scope and deadline of prohibited substances in the list according to the requirements of development situation of China’s automobile industry, technical progress of automobile products, protecting environment of nation and human health. The maintenance accessories of automobiles sold after implementation time of the standard shall be in accordance with the requirements for prohibited substances on automobiles, as same as the new models. Before the stipulated implementation time, automobile models which have been noticed or imported for sales can continue to use the spare parts of raw materials for maintenance, but it is encouraged that the maintenance parts shall be the same materials as new models. Requirements for prohibited substances on automobiles1 ScopeThis Standard specifies the prohibited substances of automobile and its parts products. This Standard applies to the automobile and parts products used in China.2 Normative referencesThe following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document. QC/T 941-2013 Test methods of mercury in automobiles materials QC/T 942-2013 Test methods of hexavalent chromium in automotive materials QC/T 943-2013 Test methods of lead and cadmium in automotive materials QC/T 944-2013 Test methods of polybrominated biphenyls and polybrominated diphenyl ethers in automotive materials3 Terms and definitionsFor the purpose of this document, the following terms and definitions apply. 3.1 Homogeneous materials Parts or modules (such as unscrewing, cutting, rolling, scraping, and grinding) which can not be further split by mechanical methods, and the composition of each part is of the same material.4 Scope of prohibited substances4.1 Scope of prohibited substances In particular, the prohibited substances required in this Standard refer to the following 6 substances. 4.2 Content limits of prohibited substances In addition to the automobile parts and materials exempted within a certain period stipulated in Appendix A, the mass percentage of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs), polybrominated diphenyl ethers (PBDEs) in each homogeneous materials of automobiles and parts products shall not exceed 0.1% and the mass percentage of cadmium shall not exceed 0.01%. 4.3 Exemption requirements for prohibited substances 4.3.1 Exemption requirements According to the current situation of China automobile product technology and using materials, the exemption requirements for prohibited substances are stipulated in Appendix A. Automobile parts and materials, scope and exemption deadline stipulated in Appendix A will be timely adjusted according to the situation. After the exemption deadline expires, the reusing and remanufacturing products of automobile products and parts are still exempted. 4.3.2 Other exemption conditions For automobile parts or materials not listed in Appendix A, if they meet one of the following conditions, the automobile manufacturer or importer can propose an exemption application for products to prohibited substances. a) The prohibited substances in products cannot be replaced by other substances or materials due to technical reasons; b) It shall reduce the safety performance of the product if the prohibited substances are prohibited; c) It shall affect the normal use and maintenance of the product if the prohibited substances are prohibited; d) It shall significantly shorten the service life of the product if the prohibited substances are prohibited; e) The production cost or sales cost of products shall be significantly increased if the prohibited substances are prohibited.5 Detection methods of prohibited substancesThe 4 following detection methods are recommended for the detection for the 6 prohibited substances proposed in this Standard. 6 The transitional period requirements implemented by the standard The products which have obtained permission or passed certification shall be executed from the 25th month of the implementation day of this Standard.Appendix A(Normative) Exemption of prohibited substances Exemption of prohibited substances is shown in Table A.1. Table A.1 Exemption of prohibited substances Materials and parts The scope and deadline of exemption Lead alloys 1.Steel and galvanized steel for machining (Lead ≤0.35%) 2.Aluminum material (Lead≤0.4%) 3.Copper alloy (Lead ≤4%) 4(a) Bearing bush and shaft sleeve June 30, 2015 4(b) Bearing bush and shaft sleeve of engine, transmission and air conditioning compressor June 30, 2016 Lead and lead compounds for parts 5.Storage battery 6.Damper 7.Flexible brake hoses, fuel hoses, flexible ventilation ducting, elastomer / metal parts for chassis and elastomer sulfurizing reagent and stabilizer for engine mounting (Lead≤0.5%) June 30, 2015 8.Elastomeric adhesive on the power assembly (Lead ≤0.5%) June 30, 2015 9.Welding flux for circuit boards and other electric parts 10.Valve seat June 30, 2015 11.Electrical components with leaded glass or ceramic matrix composites except for bulb glass and enamel layer of sparking plug 12.Pyrotechnic primer June 30, 2015 13.Lead-coated steel plate for automotive fuel tank June 30, 2015 14.Wheel counterbalance June 30, 2014 15.Carbon brush for electric machine June 30, 2015 16.Copper in the friction materials of brake lining (Lead ≤0.5%) June 30, 2014 Hexavalent chromium 17.Anticorrosive paint June 30, 2014 18.Chassis is assembled with corrosion prevention coating of bolts and nuts and other parts June 30, 2014 19.Heat absorption air conditioning in motor caravan Mercury 20.Electric-discharge lamp for headlamp 21.Fluorescent tube of instrument board display Cadmium 22.Battery for electric vehicle From the implementation date of this Standard, nickel-cadmium battery is only allowed to be the spare parts of those vehicles which have entered into the market before this date. Bromide flame-retardant 23.Decabromodiphenyl ether Note 1.The content limits in parentheses are all in mass percentage. Note 2.The exemption deadline in the table is that – for the new certificated models, the exemption deadline shall be postponed for 2 years, from the exemption deadline of producing automobiles. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 30512-2014 be delivered?Answer: The full copy PDF of English version of GB/T 30512-2014 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 30512-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30512-2014_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 30512-2014 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 30512-2014?A step-by-step guide to download PDF of GB/T 30512-2014_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 30512-2014". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
