GB/T 25747-2022 English PDF
Price & Delivery
US$335.00 · In stock · Download in 9 secondsGB/T 25747-2022: Magnesium alloy die castings
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
GB/T 25747: Historical versions
| Standard ID | USD | BUY PDF | Delivery | Standard Title (Description) | Status |
| GB/T 25747-2022 | 335 | Add to Cart | Auto, 9 seconds. | Magnesium alloy die castings | Valid |
| GB/T 25747-2010 | 599 | Add to Cart | 3 days | Magnesium alloy die castings | Obsolete |
Click to Preview this PDF
Similar standards
GB/T 25747-2022: Magnesium alloy die castings
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT25747-2022GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.120.20 CCS J 31 Replacing GB/T 25747-2010 Magnesium alloy die castings ISSUED ON: MARCH 09, 2022 IMPLEMENTED ON: OCTOBER 01, 2022 Issued by: State Administration for Market Regulation; Standardization Administration of PRC.
Table of Contents
Foreword ... 3 1 Scope ... 5 2 Normative references ... 5 3 Terms and definitions ... 6 4 Technical requirements ... 6 5 Test methods ... 10 6 Inspection rules ... 11 7 Marking, packaging, transportation, storage ... 13 Appendix A (Informative) Mechanical properties of die casting magnesium alloy specimens ... 15 Appendix B (Informative) Additional amount when line size is affected by parting surface ... 16 Appendix C (Informative) Additional amount when the line size is affected by the movable part of the mold ... 17 Appendix D (Informative) Shape and position tolerances of die castings ... 18 Appendix E (Normative) Internal defects of die castings ... 20 Magnesium alloy die castings1 Scope
This document specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation, storage of magnesium alloy die castings. This document applies to magnesium alloy die castings (hereinafter referred to as "die castings").2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, for dated references, only the version corresponding to the date applies to this document; for undated references, the latest version (including all amendments) is applicable to this document. GB/T 228.1 Metallic materials - Tensile testing - Part 1: Method of test at room temperature GB/T 231.1 Metallic materials - Brinell hardness test - Part 1: Test method GB/T 1182 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form orientation location and run-out GB/T 1958 Geometrical product specifications (GPS) - Geometrical tolerance - Verification prescription GB/T 2828.1 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection GB/T 2829 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability) GB/T 3177 Geometrical product specifications (GPS) - Inspection of plain workpiece sizes GB/T 5611 Foundry terminology GB/T 6414-2017 Castings - Dimensional tolerances and geometrical tolerances and machining allowances GB/T 11351-2017 Mass tolerances of casting 4.2.3 If there is no special provision, the mechanical properties shall not be used as the basis for acceptance. 4.3 Dimensions 4.3.1 The geometry and size of die castings shall conform to the requirements of the die casting drawings. 4.3.2 The dimensional tolerance of die castings shall meet the requirements of grade DCTG4 ~ grade DCTG7 in GB/T 6414-2017. For the dimensional tolerance, which is affected by the parting surface and the movable part of the mold, it needs to add an additional amount, please refer to Appendix B and Appendix C. When there are special provisions and requirements, they shall be marked on the drawings. 4.3.3 For the geometric tolerance requirements of die castings, please refer to Appendix D. Its labeling method shall comply with the provisions of GB/T 1182. 4.3.4 The machining allowance of die castings shall be implemented, in accordance with the provisions of GB/T 6414-2017. If there are special provisions and requirements, the machining allowance shall be indicated on the drawing. 4.4 Weight When the buyer has requirements on the weight of die castings, its weight tolerance shall comply with the grade MT5 ~ grade MT7 requirements of GB/T 11351-2017. 4.5 Surface quality 4.5.1 The surface roughness of die castings shall conform to the drawings or customer requirements. 4.5.2 Die castings shall not have penetrating cracks, under-casting or other defects. They are allowed to have scratches, dents, lack of flesh, mesh-shaped burrs, gray spots, flow marks and other defects. 4.5.3 There shall be no bulging phenomenon on the mating surface of die castings; the number and size of such defect, on the non-mating surfaces, which is allowed to exist, shall be determined, through negotiation between the supplier and the buyer. 4.5.4 If there is no special provision in the drawings, the settings of the die-casting process, such as the position of the ejector pin, the position of the parting line, the position of the gate and the overflow port, etc., shall be determined, through negotiation between the supplier and the buyer. 4.5.5 The surface of the die casting, that needs special treatment, such as polishing, shot blasting, chrome plating, coating, anodizing, chemical oxidation, etc., shall be indicated on the drawing. provisions of GB/T 231.1. 5.2.3 When sampling is required for die castings, the sampling location, specimen structure and size shall be agreed upon by both the supplier and the buyer. 5.3 Dimensions 5.3.1 The geometric dimension inspection of die castings shall be carried out, in accordance with the provisions of GB/T 3177. 5.3.2 The geometric tolerance inspection of die castings shall be carried out, in accordance with the provisions of GB/T 1958. 5.3.3 If the accuracy is met, general or special measuring tools can be used for inspection. 5.4 Weight During mass production, it shall randomly take not less than 10 pieces of products from the blanks; use the average weight of the actual weight is taken as the nominal weight. 5.5 Surface quality 5.5.1 The surface quality of die castings shall be inspected by visual method or by other suitable methods. 5.5.2 The surface roughness of the die castings shall be tested by comparing the sample blocks. 5.6 Internal quality 5.6.1 The test methods for the internal quality of die castings may include non- destructive testing, pressure test, metallographic inspection, cutting inspection, etc. 5.6.2 Corresponding quality inspection shall be carried out for the die castings, after infiltration, repair, deformation correction.6 Inspection rules
6.1 Inspection items The inspection of die castings is divided into type test and exit-factory inspection. The inspection items are as shown in Table 4. 6.4.3 When the size of any specimen is unqualified, it shall be judged as unqualified. The rest of the products in the same batch are checked one by one. 6.4.4 When the weight of any specimen is unqualified, it shall be judged as unqualified. The rest of the products in the same batch are checked one by one. 6.4.5 When the surface quality of any specimen is unqualified, it shall be judged as unqualified. 6.4.6 When the internal quality of any specimen is unqualified, it shall be judged as unqualified. Check the rest of the same batch one by one.7 Marking, packaging, transportation, storage
7.1 Product marking The following marks shall be cast or engraved on non-machined surfaces of the die castings: a) Raw material designation; b) Part number; c) Customer trademarks or symbols; d) Manufacturer's brand or symbol; e) Manufacturing year, month, mold number; f) Other markings specified by the customer. 7.2 Packaging signs The outer packaging of die castings shall have the following signs: a) Part number; b) Product code; c) Date of packing quantity; d) Internal system-specific traceability information; e) The manufacturer's brand or symbol; f) Other requirements specified by the customer. 7.3 Packaging ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
