Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 2423.60-2008 PDF English

US$355.00 · In stock · Download in 9 seconds
GB/T 2423.60-2008: Environmental testing - Part 2: Test methods - Test U: Robustness of terminations and integral mounting devices
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 2423.60-2008355 Add to Cart Auto, 9 seconds. Environmental testing - Part 2: Test methods - Test U: Robustness of terminations and integral mounting devices Valid

Similar standards

GB/T 2423.61   GB/T 2423.59   GB/T 2423.6   GB/T 2423.66   

GB/T 2423.60-2008: Environmental testing - Part 2: Test methods - Test U: Robustness of terminations and integral mounting devices


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT2423.60-2008
NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 19.040 K 04 GB/T 2423.60-2008 / IEC 60068-2-21.2006 Environmental testing for electric and electronic products - Part 2.Test methods - Test U. Robustness of terminations and integral mounting devices (IEC 60068-2-21.2006, Environmental testing - Part 2-21.Tests - Test U. Robustness of terminations and integral mounting devices, IDT) Issued on. DECEMBER 30, 2008 Implemented on. NOVEMBER 01, 2009 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the People's Republic of China.

Table of Contents

Foreword... 3 1 Scope... 4 2 Normative references... 4 3 Test Ua1.tensile... 5 4 Test Ua2.thrust... 7 5 Test Ub. bending... 9 6 Test Uc. torsion... 14 7 Test Ud. torque... 15 8 Test Ue. robustness of terminations for SMD in the mounted state... 17 Annex NA (informative) Parts of GB/T 2423... 32 Bibliography... 36

Foreword

See Annex NA for the parts of GB/T 2423 “Environmental testing for electric and electronic products - Part 2.Test methods”. This Part is Part 60 of GB/T 2423. This Part identically adopts IEC 60068-2-21.2006 “Environmental testing - Part 2-21. Tests - Test U. Robustness of terminations and integral mounting devices” (English version). It only made the following editorial modifications. - modified “this Part of IEC 60068” to “this Part of GB/T 2423” or “this Part”; - used decimal point "." to replace comma "," that is used as decimal point; - deleted the foreword of the international standard; - added the informative Annex NA. Annex A, Annex NA of this Part are informative. This Standard was proposed by and shall be under the jurisdiction of National Technical Committee on Environmental Conditions and Environmental Tests of Electrical and Electronic Products of Standardization Administration of China (SAC/TC 8). Main drafting organizations of this Standard. Guangzhou University, Fifth Electronics Research Institute of the Ministry of Information Industry, Shanghai Institute of Quality Inspection Technology, Suzhou General Test Instrument Factory. Main drafters of this Standard. Xu Zhonggen, Ji Chunyang, Lu Zhaoming, Xu Liyi, Zhang Guoming, Yang Chuan. Environmental testing for electric and electronic products - Part 2.Test methods - Test U. Robustness of terminations and integral mounting devices

1 Scope

This Part of GB/T 2423 is applicable to all electrical and electronic components whose terminations or integral mounting devices are liable to be submitted to stresses during normal assembly or handling operations.

2 Normative references

The provisions in following documents become the provisions of this Part of GB/T 2423 through reference in this Part. For dated references, the subsequent amendments (excluding corrigendum) or revisions do not apply to this Part, however, parties who reach an agreement based on this Part are encouraged to study if the latest versions of these documents are applicable. For undated references, the latest edition of the referenced document applies. 3 Test Ua1.tensile This test is applicable to all types of terminations. The specimen shall be visually inspected and electrically and mechanically checked, as required by the relevant specification. 4 Test Ua2.thrust The method of preconditioning shall be as prescribed in the relevant specification. The specimen shall be visually inspected and electrically and mechanically checked, as required by the relevant specification. 5 Test Ub. bending This test is applicable to pliable terminations only. Unless otherwise specified in the relevant specification, the test method shall be as follows. The specimen shall be visually inspected and electrically and mechanically checked, as required by the relevant specification. 6 Test Uc. torsion The specimen shall be visually inspected and electrically and mechanically checked as required by the relevant specification. Each termination shall be bent through 90° at a point 6 mm to 6.5 mm from the point of emergence of the termination. 7 Test Ud. torque The method of preconditioning shall be as prescribed in the relevant specification. Unless otherwise specified in the relevant specification, the test method shall be as follows. The specimen shall be visually inspected and electrically and mechanically checked, as required by the relevant specification.

8 Test Ue. robustness of terminations for SMD in the mounted state

The dimensions for the soldering lands on the substrate shall be prescribed by the IEC 61188-5 series or the relevant specifications. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 2423.60-2008 be delivered?Answer: The full copy PDF of English version of GB/T 2423.60-2008 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 2423.60-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2423.60-2008_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 2423.60-2008 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB/T 2423.60-2008?

A step-by-step guide to download PDF of GB/T 2423.60-2008_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 2423.60-2008".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9