GB 6537-2025 PDF English
US$275.00 · In stock · Download in 9 seconds
GB 6537-2025: No.3 jet fuel
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
GB 6537-2025: No.3 jet fuel
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
GB 6537: Historical versions
| Standard ID | USD | BUY PDF | Delivery | Standard Title (Description) | Status |
| GB 6537-2025 | 275 | Add to Cart | Auto, 9 seconds. | No.3 jet fuel | Valid |
| GB 6537-2018 | 155 | Add to Cart | Auto, 9 seconds. | No.3 jet fuel | Valid |
| GB 6537-2006 | 70 | Add to Cart | Auto, 9 seconds. | No.3 Jet fuel | Obsolete |
| GB 6537-1994 | 70 | Add to Cart | Auto, 9 seconds. | No. 3 Jet fuel | Obsolete |
| GB 6537-1986 | RFQ | ASK | 3 days | Jet fuel RP-3 | Obsolete |
GB 6537-2025: No.3 jet fuel
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB6537-2025GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 75.160.20 CCS E 31 Replacing GB 6537-2018 No.3 Jet Fuel Issued on: AUGUST 29, 2025 Implemented on: SEPTEMBER 1, 2026 Issued by. State Administration for Market Regulation; Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 3 1 Scope... 5 2 Normative References... 5 3 Terms and Definitions... 8 4 Abbreviations... 8 5 Technical Requirements and Test Methods... 9 6 Inspection Rules... 12 7 Marking, Packaging, Transportation, Storage, Delivery and Acceptance... 13 8 Safety... 13 Appendix A (normative) Names and Dosages of Additives... 14 Appendix B (normative) Fischer Tropsch-Synthesized Paraffinic Kerosine (FT-SPK) ... 15 Appendix C (normative) Hydroprocessed Esters and Fatty Acids-Synthesized Paraffinic Kerosine (HEFA-SPK)... 17 Bibliography... 19 No.3 Jet Fuel WARNING---if appropriate precautions are not taken, the products described in this document may pose hazards during production, storage, transportation and use. This document does not intend to propose suggestions on all safety issues related to this product. Users are responsible for taking appropriate safety and health precautions and ensuring compliance with relevant national regulations.1 Scope
This document specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, delivery, acceptance and safety of No. 3 jet fuel processed from natural crude oil or its distillates and kerosine fraction of synthetic hydrocarbons. This document applies to No. 3 jet fuel for aviation turbine engines.2 Normative References
The contents of the following documents constitute indispensable clauses of this document through the normative references in the text. In terms of references with a specified date, only versions with a specified date are applicable to this document. In terms of references without a specified date, the latest version (including all the modifications) is applicable to this document. GB 190 Packing Symbol of Dangerous Goods GB/T 261 Determination of Flash Point - Pensky-Martens Closed Cup Method GB/T 265 Petroleum Products - Determination of Kinematic Viscosity and Calculation of Dynamic Viscosity GB/T 380 Petroleum Products - Determination of Sulphur - Lamp Method GB/T 382 Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel GB/T 384 Petroleum Products - Determination of Heat of Combustion GB/T 509 Engine Fuels - Determination of Existent Gum GB/T 1792 Determination of Mercaptan Sulfur in Gasoline, Kerosine, Jet, and Distillate Fuels - Potentiometric Method GB/T 1793 Standard Test Method for Water Reaction of Aviation Fuels GB/T 1884 Crude Petroleum and Liquid Petroleum Products - Laboratory Determination of Density - Hydrometer Method SH/T 0093 Jet Fuels - Test for Silver Strip Corrosion SH/T 0181 Standard Test Method for Naphthalene Hydrocarbons in Jet Fuels by Ultraviolet Spectrophotometry SH/T 0182 Determination of Copper Content in Light Petroleum (spectrophotometric method) SH/T 0558 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography SH/T 0604 Crude Petroleum and Petroleum Products - Determination of Density - Oscillating U-tube Method SH/T 0616 Determination Method for Water Separation Index of Jet Fuel (portable separometer method) SH/T 0635 Sampling Method for Liquefied Petroleum Products (semi-auto method) SH/T 0657 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe / Inlet Oxidative Combustion and Chemiluminescence Detection SH/T 0687 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE) SH/T 0689 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons Motor Fuels and Oils by Ultraviolet Fluorescence SH/T 0770 Standard Test Method for Freezing Point of Aviation Fuels (automatic phase transition method)3 Terms and Definitions
This document does not have terms or definitions that need to be defined.4 Abbreviations
The following abbreviations apply to this document. FAME. Fatty Acid Methyl Ester. FT-SPK. Fischer Tropsch-Synthesized Paraffinic Kerosine. HEFA-SPK. Hydroprocessed Esters and Fatty Acids-Synthesized Paraffinic Kerosine.5 Technical Requirements and Test Methods
5.1 The raw materials, production processes, and additives used in the production of No.3 jet fuel shall comply with the prescribed approval procedures. The additives shall meet the requirements of Appendix A. In addition to complying with the prescribed procedures, the production process shall be constructed in accordance with the approval requirements. Production enterprises selecting raw materials and additives shall comply with the requirements of national laws and regulations during the production process and shall use raw materials and additives that meet the requirements of the product standards. 5.2 No.3 jet fuel shall meet the technical requirements of Table 1, and the test methods shall be as specified in Table 1. 5.3 In addition to meeting the requirements of Table 1, the technical requirements for No.3 jet fuel containing FT-SPK synthetic hydrocarbon components shall also meet the following requirements. the FT-SPK synthetic hydrocarbon components shall meet the requirements of Appendix B, and the volume fraction of conventional petroleum-based components in No.3 jet fuel containing FT-SPK components shall not be less than 50%. The volume fraction of aromatics in No.3 jet fuel containing FT-SPK synthetic hydrocarbon components shall not be less than 8.0%, the difference between the 50% and 10% recovery temperatures of the distillation range shall not be less than 15 C, and the difference between the 90% and 10% recovery temperatures of the distillation range shall not be less than 40 C. In addition to meeting the requirements of Table 1, the technical requirements for No.3 jet fuel containing HEFA-SPK synthetic hydrocarbon components shall also meet the following requirements. the HEFA-SPK synthetic hydrocarbon components shall meet the requirements of Appendix C, and the volume fraction of conventional petroleum-based components in No.3 jet fuel containing HEFA-SPK components shall not be less than 50%. The volume fraction of aromatics in No.3 jet fuel containing HEFA-SPK synthetic hydrocarbon components shall not be less than 8.0%, the difference between the 50% and 10% recovery temperatures of the distillation range shall not be less than 15 C, and the difference between the 90% and 10% recovery temperatures of the distillation range shall not be less than 40 C, and its kinematic viscosity (40 C) shall not exceed 12.0 mm2/s. The test methods shall conform to GB/T 265 or GB/T 30515; in case of dispute, the method of GB/T 265 shall prevail. The biocarbon content in No.3 jet fuel containing synthetic hydrocarbons may be determined using NB/SH/T 6044. 5.4 In addition to meeting the requirements in Table 1, the technical requirements for No.3 jet fuel containing direct coal liquefaction components shall be determined through negotiation between the supply-side and the demand-side. Direct coal liquefaction components are not applicable to No.3 jet fuel for civil purposes.6 Inspection Rules
6.1 Inspection Classification and Inspection Items Exit-factory inspection includes all inspection items specified in Chapter 5 - Technical Requirements. Periodic exit-factory inspection items are olefin volume fraction and kinematic viscosity (20 C), which are determined at least once a year; the olefin volume fraction shall not be greater than 5.0%, the kinematic viscosity (20 C) shall not be greater than 1.25 mm2/s; the olefin volume fraction is determined in accordance with the method described in GB/T 11132, and the kinematic viscosity (20 C) is determined in accordance with the method described in GB/T 265 or GB/T 30515.In case of dispute, GB/T 265 shall prevail. 6.2 Batching Under the condition of unchanged raw materials, processes and additives, each can or kettle produced constitutes one batch. 6.3 Sampling Sampling is conducted in accordance with GB/T 4756, GB/T 27867 or SH/T 0635.Take 11 L of oil sample from each batch of product for inspection, and 2.5 L of oil sample as retained sample. 6.4 Determination Rules If the exit-factory inspection results meet the technical requirements of Chapter 5, then, it shall be determined that the batch of products is qualified. 6.5 Re-inspection Rules If any item in the exit-factory inspection results does not meet the technical requirements of Chapter 5, then, double the sample size shall be re-sampled in accordance with the provisions of GB/T 4756, GB/T 27867 or SH/T 0635 for a re-inspection of the non-compliant items. If the re-inspection results still do not meet the technical requirements of Chapter 5, then, it shall be determined that the batch of products is disqualified.7 Marking, Packaging, Transportation, Storage, Delivery and
Acceptance In accordance with GB 6944 and GB 30000.7, No.3 jet fuel is a flammable liquid. The marking, packaging, transportation, storage, delivery and acceptance of the product shall be carried out in accordance with GB 6944, GB 30000.7, NB/SH/T 0164, GB 30000.1 and GB 190.8 Safety
In accordance with GB 30000.7, No.3 jet fuel is a flammable liquid, and its hazard statement and precautionary statement shall comply with the relevant sections on flammable liquids in GB 30000.7. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked Questions:
Question 1: How long will the true-PDF of English version of GB 6537-2025 be delivered?
Answer: The full copy PDF of English version of GB 6537-2025 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB 6537-2025_English with my colleagues?
Answer: Yes. The purchased PDF of GB 6537-2025_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?
Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?
Answer: Yes. www.ChineseStandard.us -- GB 6537-2025 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB 6537-2025?
Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 6537-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB 6537-2025?
A step-by-step guide to download PDF of GB 6537-2025_English
Step 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB 6537-2025".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
