|
Std ID |
Description (Standard Title) |
|
NB/T 11103-2023
|
(Procedures for preparation of bio-natural gas project planning report)
|
|
NB/T 11104-2023
|
Conductive graphite ring for lengthwise graphitization furnace
|
|
NB/T 11105-2023
|
Technical specification of coalbed methane numerical simulation
|
|
NB/T 11106-2023
|
Technical requirements for unattended monitoring and control system of underground power supply in coal mine
|
|
NB/T 11107-2023
|
Performance requirements of collecting agent for coal preparation
|
|
NB/T 11108-2023
|
Performance requirements of foaming agents for coal preparation
|
|
NB/T 11109.1-2023
|
General specifications of information communication in the mine - Part 1: General requirements
|
|
NB/T 11110-2023
|
(Drilling Engineering Atlas)
|
|
NB/T 11111-2023
|
Specification for feasibility evaluation of coal geological exploration
|
|
NB/T 11112-2023
|
(Coal construction project unit project division standard)
|
|
NB/T 11113-2023
|
(Coal mine equipment installation engineering quality evaluation standard)
|
|
NB/T 11114-2023
|
General requirements for coal and gas outburst early warning system
|
|
NB/T 11115-2023
|
Technical guidelines for smart power system in coal mine
|
|
NB/T 11116-2023
|
Coal Gangue(coal slime) power generation green development management, requirements
|
|
NB/T 11117-2023
|
Technical requirements for green development of low-quality coal comprehensive utilization power plant
|
|
NB/T 11118.10-2023
|
EtherNet/IP communication interface and protocol of mechanical and electrical equipment in fully mechanized coal mining face - Part 10: Device profile of vacuum electromagnetic starter for low voltage alternate circuit
|
|
NB/T 11118.11-2023
|
EtherNet/IP communication interface and protocol of mechanical and electrical equipment in fully mechanized coal mining face - Part 11: Integrated protector of lighting and signal device profile
|
|
NB/T 11118.1-2023
|
EtherNet/IP communication interface and protocol of mechanical and electrical equipment in fully mechanized coal mining face - Part 1: General principles
|
|
NB/T 11118.2-2023
|
EtherNet/IP communication interface and protocol of mechanical and electrical equipment in fully mechanized coal mining face - Part 2: Extended object library
|
|
NB/T 11118.3-2023
|
EtherNet/IP communication interface and protocol of mechanical and electrical equipment in fully mechanized coal mining face - Part 3: Shearer device profile
|
|
NB/T 11118.4-2023
|
EtherNet/IP communication interface and protocol of mechanical and electrical equipment in fully mechanized coal mining face - Part 4: Powered support device profile
|
|
NB/T 11118.5-2023
|
EtherNet/IP communication interface and protocol of mechanical and electrical equipment in fully mechanized coal mining face - Part 5: Fluid supply system device profile
|
|
NB/T 11118.6-2023
|
EtherNet/IP communication interface and protocol of mechanical and electrical equipment in fully mechanized coal mining face - Part 6: Armored VFD face conveyor and stage loader device profile
|
|
NB/T 11118.7-2023
|
EtherNet/IP communication interface and protocol of mechanical and electrical equipment in fully mechanized coal mining face - Part 7: Mobile substation device profile
|
|
NB/T 11118.8-2023
|
EtherNet/IP communication interface and protocol of mechanical and electrical equipment in fully mechanized coal mining face - Part 8: Device profile of vacuum feeder switchgear for low voltage alternate circuit
|
|
NB/T 11118.9-2023
|
EtherNet/IP communication interface and protocol of mechanical and electrical equipment in fully mechanized coal mining face - Part 9: Device profile of multi-circuit vacuum electromagnetic starter for low voltage alternate circuit
|
|
NB/T 11119-2023
|
Code for Safety Management System of comprehensive utilization of low-quality coal for power generation
|
|
NB/T 47003.1-2022
|
Atmospheric pressure vessels - Part 1: Steel welded atmospheric pressure vessels
|
|
NB/T 47003.2-2022
|
(Atmospheric pressure vessels - Part 2: Solid storage bins)
|
|
NB/T 47011-2022
|
(Zirconium pressure vessel)
|
|
NB/T 47018.4-2022
|
Technical conditions for ordering welding materials for pressure equipment - Part 4: Submerged arc welding wire and flux
|
|
NB/T 47018.6-2022
|
Technical conditions for ordering welding materials for pressure equipment - Part 6: Aluminum and aluminum alloy welding wires and filler wires
|
|
NB/T 47018.7-2022
|
Technical conditions for ordering welding materials for pressure equipment - Part 7: Titanium and titanium alloy welding wires and filler wires
|
|
NB/T 47018.8-2022
|
Technical conditions for ordering welding materials for pressure equipment - Part 8: Zirconium and zirconium alloy welding wires and filler wires
|
|
NB/SH/T 0425-2023
|
(Method for Determination of Petroleum Asphalt Wax Content)
|
|
NB/SH/T 0699-2023
|
(Refrigeration oil and refrigerant compatibility test method)
|
|
NB/SH/T 0764-2023
|
(Test method for coking of diesel engine nozzle XUD-9 method)
|
|
NB/SH/T 0818-2023
|
(Stabilized rubber asphalt)
|
|
NB/SH/T 0843-2023
|
(Evaluation of test systems for the petrochemical industry Statistical techniques)
|
|
NB/SH/T 6069-2023
|
(Determination of nitrogen and hydrocarbon boiling range distributions of petroleum fractions - Gas chromatography)
|
|
NB/SH/T 6070-2023
|
(Determination of boiling range distribution of sulfur and hydrocarbons in petroleum fractions - Gas chromatography)
|
|
NB/SH/T 6071-2023
|
(Determination of Atmospheric Distillation Properties of Petroleum Products - Microdistillation)
|
|
NB/SH/T 6072-2023
|
(Filtration of Particulate Contaminants in Lubricating Oils)
|
|
NB/SH/T 6073-2023
|
(Method for determination of fuel oil dilution content in internal combustion engine oil - surface acoustic wave method)
|
|
NB/SH/T 6074-2023
|
(Diesel antiwear agent)
|
|
NB/SH/T 6075-2023
|
(Determination of morphology of catalytic cracking catalysts - dynamic image method)
|
|
NB/SH/T 6076-2023
|
(Method for Determination of Corrosion Resistance of Synthetic Gas Turbine Lubricants)
|
|
NB/SH/T 6077-2023
|
(Determination of glycol-based coolant in lubricating oil)
|
|
NB/T 11051-2023
|
Technical specification for HVDC protection test equipment
|
|
NB/T 11052-2023
|
Technical guidelines for control and protection of HVDC circuit breakers
|
|
NB/T 11053-2023
|
Technical specifications of automatic fast power dispatching device
|
|
NB/T 11054-2023
|
Technical specification for anti-islanding protection equipment
|
|
NB/T 11055-2023
|
Technical requirements for relay protection of AC/DC hybrid distribution network
|
|
NB/T 11056-2023
|
Calibration specification for automatic testing equipment for relay test set
|
|
NB/T 11057-2023
|
Technical requirements of transformer cooling control and protection equipment
|
|
NB/T 11058-2023
|
(Electrical equipment Tropical island environmental conditions)
|
|
NB/T 11059-2023
|
General technical conditions of standard lightning impulse voltage generator for high altitude on-site test
|
|
NB/T 11060-2023
|
General technical specifications of overhead transmission line insulators parallel gaps used in high altitude regions
|
|
NB/T 11061-2023
|
(Artificial simulation test method for guano flashover of insulator strings on AC overhead transmission lines in high altitude areas)
|
|
NB/T 11062-2023
|
Technical specification of vanadium flow battery stack
|
|
NB/T 11063-2023
|
Recovery requirements of electrolyte for vanadium flow battery
|
|
NB/T 11064-2023
|
Zinc-based flow battery system - Test method
|
|
NB/T 11065-2023
|
Zinc-Bromine flow battery - Safety requirement
|
|
NB/T 11066-2023
|
Zinc-Bromine flow battery - Installation specification
|
|
NB/T 11067-2023
|
Electrolyte for iron chromium flow battery technical specifications
|
|
NB/T 11068-2023
|
General technical specification for 1500 V DC photovoltaic (PV) power station
|
|
NB/T 11069-2023
|
Technical specification of hybrid converter valves based on full-bridge and half-bridge submodule for high-voltage direct current using voltage source converters
|
|
NB/T 11070-2023
|
Guide to the high-voltage alternating-current generator circuit-breakers
|
|
NB/T 11071-2023
|
Guide for test of AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52kV
|
|
NB/T 11072-2023
|
Guide to the interpretation of test voltage measuring systems
|
|
NB/T 11073-2023
|
Electrical system safety design requirements for plateau wind turbines
|
|
NB/T 11074-2023
|
Warm-damp environment durability evaluation - High voltage switch operating mechanism
|
|
NB/T 11075-2023
|
Saturable reactor for high voltage direct current (HVDC) converter valve
|
|
NB/T 11076-2023
|
General technical specifications for high-voltage alternating-current fault current limiters
|
|
NB/T 11077-2023
|
Technical specifications for high-voltage alternating-current fault current limiter based on current-limiting reactor
|
|
NB/T 11078-2023
|
Technical specifications for high-voltage alternating-current fault current limiter based on high coupled split reactor
|
|
NB/T 11079-2023
|
Specification for supports and tracking systems of photovoltaic power station
|
|
NB/T 11080-2023
|
Specifications of electroluminescent (EL) inspection for photovoltaic modules
|
|
NB/T 11081-2023
|
Specification for infrared thermal imaging (TIS) inspection of photovoltaic modules
|
|
NB/T 11082-2023
|
(Regulations for the preparation of planning reports for wind, water, thermal storage and multi-energy complementary power generation projects)
|
|
NB/T 11083-2023
|
(Wind power information management data quality assessment and governance technical specifications)
|
|
NB/T 11084-2023
|
(Code for Loading of Buildings (Structures) in Offshore Wind Farm Engineering)
|
|
NB/T 11085-2023
|
(Code for construction safety monitoring of offshore wind farm engineering structure)
|
|
NB/T 11086-2023
|
(Technical specifications for composite tubular foundations of wind turbines in offshore wind farm engineering)
|
|
NB/T 11087-2023
|
(Design Guidelines for Land Treatment of Hydropower Project Decommissioning Projects)
|
|
NB/T 11088-2023
|
(Regulations for Compilation of Bidding Design Report for Hydropower Projects)
|
|
NB/T 11089-2023
|
(Code for Design of Hydraulic Retaining Wall)
|
|
NB/T 11090-2023
|
(Specifications for the design of diversion channels and forebays of hydropower stations)
|
|
NB/T 11091-2023
|
(Hydropower engineering safety signs)
|
|
NB/T 11092-2023
|
(Technical specifications for deep buried tunnels in hydropower projects)
|
|
NB/T 11093-2023
|
(Code for design of cemented sand and gravel cofferdam)
|
|
NB/T 11094-2023
|
(Technical Guidelines for Underwater Self-retaining Concrete)
|
|
NB/T 11095-2023
|
(Informatization Guidelines for Hydropower Project Archives)
|
|
NB/T 11096-2023
|
(Standards for judging potential safety hazards in hydropower projects)
|
|
NB/T 11097-2023
|
(Provisions on the Safety Management and Protection Scope of Hydropower Projects)
|
|
NB/T 11098-2023
|
(Water and Soil Conservation Supervision Specifications for Hydropower Projects)
|
|
NB/T 11099-2023
|
(Technical regulations for on-line monitoring of ferromagnetic steel wire ropes in hydropower projects)
|
|
NB/T 11100-2023
|
(Technical specification for on-line monitoring of bolt stress in hydropower projects)
|
|
NB/T 11101-2023
|
(Biogas Engineering Design Guidelines)
|
|
NB/T 11102-2023
|
(Classification and design safety standards of bio-natural gas engineering)
|