|
Std ID |
Description (Standard Title) |
|
JB/T 8143.3-1995
|
Shipboard radio-frequency cables Radio-frequency coaxial cables with polyethelene in sulated copper conductor, rated characteristic impedance 75Ω
|
|
JB/T 8143.4-1995
|
Shipboard radio-frequency cables Radio-frequency coaxial cables with PTFE insulated coppor clad, Steel conductor rated characteristic impedance 75Ω
|
|
JB/T 8144.1-1995
|
Fittings for power supply cables with rated voltage between 26/35kV and below. Basic technical requirement. General rules
|
|
JB/T 8144.2-1995
|
Fittings for power supply cables with rated voltage between 26/35kV. Basic technical requirement. Cable terminals
|
|
JB/T 8144.3-1995
|
Fittings for power supply cables with rated voltage between 26/35kV. Basic technical requirement. Cable connectors
|
|
JB/T 8145.1-1995
|
Insulated cables (wires) for railway vehicles of rated voltages up to and including 3 kV. Natural-styrenbutadiene rubber insulated cables (wires) for railway vehicles
|
|
JB/T 8145.3-1995
|
Insulated cables (wires) for railway vehicles of rated voltages up to and including 3 kV. Ethylene-propylene rubber insulated cables (wires) for railway vehicles
|
|
JB/T 6743-1993
|
Corrosion prevention environment for indoor and outdoor steel cable trays Technical requirements
|
|
JB/T 6213.1-1992
|
Flexible Cables and Cords for Winding Leads of Electric Motors - Part 1: General
|
|
JB/T 6213.2-1992
|
(Motor winding connection of flexible cables and cords - Part 2: maximum continuous operating temperature of 70 Celsius of flexible cables and cords)
|
|
JB/T 6213.3-1992
|
(Motor winding connection of flexible cables and cords - Part 3: maximum continuous operating temperature of 90 Celsius flexible cables and cords)
|
|
JB/T 6213.4-1992
|
(Motor winding connection of flexible cables and cords - Part 4: maximum continuous operating temperature of 180 Celsius flexible cables and cords)
|
|
JB/T 6213.5-1992
|
Flexible Cables and Cords for Winding Leads of Electric Motors - Part 5: Freon Resistant Cords
|
|
JB/T 6464-1992
|
(Rated voltage 26/35kV and below power cable wrap-through connectors)
|
|
JB/T 6465-1992
|
(Rated voltage of 35kV power cable indoor type, outdoor type Bushing terminal)
|
|
JB/T 6466-1992
|
(Rated voltage 8. 7/10kV and below power cables within indoor type, outdoor type Bushing terminal)
|
|
JB/T 6467-1992
|
Series spectrum of power supply cables and fittings with rated voltage of 26/35kV and below
|
|
JB/T 6468-1992
|
(Rated voltage 8. 7/10kV and below power cables within indoor type, outdoor type wrapping terminal)
|
|
JB/T 5268.1-1991
|
Metallic sheath of cable Part 1 General rules
|
|
JB/T 5268.2-1991
|
Metallic sheath of cable Part 2 Lead sheath
|
|
JB/T 5332.1-1991
|
Cables for electric submersible pumps with rated voltage of 3. 6-6KV and below Part 1: General regulations
|
|
JB/T 5332.2-1991
|
Cables for electric submersible pumps with rated voltage of 3. 6-6KV and below Part 2: Leading cables for electric submersible pumps
|
|
JB/T 5332.3-1991
|
Cables for electric submersible pumps with rated voltage of 3. 6-6KV and below Part 3 Flat form power cables for electric submersible pumps
|
|
JB/T 5332.4-1991
|
Cables for electric submersible pumps with rated voltage of 3. 6-6KV and below Part 4: Circular power cables for electric submersible pumps
|
|
JB 4278.10-1986
|
(Chinese Industry Standard)
|
|
JB 4278.1-1986
|
(Chinese Industry Standard)
|
|
JB 4278.2-1986
|
(Chinese Industry Standard)
|
|
JB 4278.3-1986
|
(Chinese Industry Standard)
|
|
JB 4278.4-1986
|
(Chinese Industry Standard)
|
|
JB 4278.5-1986
|
(Chinese Industry Standard)
|
|
JB 4278.6-1986
|
(Chinese Industry Standard)
|
|
JB 4278.7-1986
|
(Chinese Industry Standard)
|
|
JB 4278.8-1986
|
(Chinese Industry Standard)
|
|
JB 4278.9-1986
|
(Chinese Industry Standard)
|
|
JB 4015.1-1985
|
(Part 1 cable retractable cord device components of general basic technical requirements)
|
|
JB 4015.2-1985
|
(Part 2 retractable wire and cable equipment components of general device Column retractable cable system)
|
|
JB 4015.3-1985
|
(Common components retractable cable and cable equipment - Part 3 lane type retractable cable system)
|
|
JB 4015.4-1985
|
(Retractable wire and cable equipment components of general device Part 4 rail retractable cable system)
|
|
JB 4015.5-1985
|
(Part 5 cable equipment common components retractable cord device cabinet closing line device)
|
|
JB 4015.6-1985
|
(Part 6 - stator wire and cable equipment common components retractable device actinomycetes device)
|
|
JB 4032.1-1985
|
(Cable pulling equipment components of general basic technical requirements - Part 1 unit)
|
|
JB 4032.2-1985
|
(Part 2 wheeled cable equipment components of general traction device traction device)
|
|
JB 4032.4-1985
|
(Common components traction device and cable equipment)
|
|
JB 4033.1-1985
|
(Common components wrapped cable equipment - Part 1 means the basic technical requirements)
|
|
JB 4033.2-1985
|
(Common components and cable equipment - Part 2 tape wrapped around the package device device)
|
|
JB 4033.3-1985
|
(Common components and cable equipment - Part 3 strips wrapped around the package device device)
|
|
JB 4033.4-1985
|
(Common components and cable equipment - Part 4 wrapped cloth tape wrapping device)
|
|
JB 4033.5-1985
|
(Universal cable equipment parts wrapped Part 5 device wrapped gearbox)
|
|
JB/T 4032.3-1985
|
(Chinese Industry Standard)
|
|
JB 3302-1983
|
(Load bearing probe cable)
|
|
JB 681-1981
|
(Paper insulated copper twisted pair local communication cable)
|
|
JB 866-1981
|
(Copper paper insulated lead sheath quad high frequency symmetrical communication cable)
|
|
JB/T 4014.1-2013
|
Winding wires for submersible motors. Part 1: General requirements
|
|
JB/T 4014.2-2013
|
Winding wires for submersible motors. Part 2: Polyethylene insulated and nylon sheathed winding wires with rated voltages up to and including 450/750V
|
|
JB/T 4014.3-2013
|
Winding wires for submersible motors. Part 3: Modified polypropylene insulated winding wires with rated voltages up to and including 450/750 V
|
|
JB/T 4014.4-2013
|
Winding wires for submersible motors. Part 4: Cross-linking polyethylene insulated and nylon sheathed winding wires with rated voltages up to and including 600/1000 V
|
|
JB/T 7599.10-2013
|
Insulating enamel for enamelled winding wires. Part 10: Polyurethane enamel, class 180
|
|
JB/T 7599.11-2013
|
Insulating enamel for enamelled winding wires. Part 11: Self-bonding enamel based on polyvinyl butyral resin
|
|
JB/T 7599.1-2013
|
Insulating enamel for enamelled winding wires. Part 1: General requirements
|
|
JB/T 7599.12-2013
|
Insulating enamel for enamelled winding wires. Part 12: Self-bonding enamel based on polyamide resin
|
|
JB/T 7599.13-2013
|
Insulating enamel for enamelled winding wires. Part 13: Self-bonding enamel based on aromatic polyamide resin
|
|
JB/T 7599.14-2013
|
Insulating enamel for enamelled winding wires. Part 14: Self-bonding enamel based on epoxy resin
|
|
JB/T 7599.2-2013
|
Insulating enamel for enamelled winding wires. Part 2: Polyvinyl acetal enamel, class 120
|
|
JB/T 7599.3-2013
|
Insulating enamel for enamelled winding wires. Part 3: Polyester enamel, class 130
|
|
JB/T 7599.4-2013
|
Insulating enamel for enamelled winding wires. Part 4: Polyurethane enamel, class 130
|
|
JB/T 7599.5-2013
|
Insulating enamel for enamelled winding wires. Part 5: Polyester enamel, class 155
|
|
JB/T 7599.6-2013
|
Insulating enamel for enamelled winding wires. Part 6: Polyesterimide enamel, class 180
|
|
JB/T 7599.7-2013
|
Insulating enamel for enamelled winding wires. Part 7: Polyamide-imide enamel, class 200
|
|
JB/T 7599.8-2013
|
Insulating enamel for enamelled winding wires. Part 8: Aromatic poly-imide enamel, class 240
|
|
JB/T 7599.9-2013
|
Insulating enamel for enamelled winding wires. Part 9: Polyurethane enamel, class 155
|
|
JB/T 8135.1-2013
|
Packaging of winding wires. Part 1: Containers for round winding wires
|
|
JB/T 8135.21-2013
|
Packaging of winding wires. Part 21: Cylindrical barrelled delivery spools. Basic dimensions
|
|
JB/T 8135.22-2013
|
Packaging of winding wires. Part 22: Cylindrical barrelled delivery spools. Specification for returnable spools made from thermoplastic material
|
|
JB/T 8135.23-2013
|
Packaging of winding wires. Part 23: Cylindrical barrelled delivery spools. Specification for non-returnable spools made from thermoplastic material
|
|
JB/T 8135.31-2013
|
Packaging of winding wires. Part 31: Taper barrelled delivery spools. Basic dimensions
|
|
JB/T 8135.32-2013
|
Packaging of winding wires. Part 32: Taper barrelled delivery spools. Specification for returnable spools made from thermoplastic materials
|
|
JB/T 8135.33-2013
|
Packaging of winding wires. Part 33: Tapper barrelled delivery spools. Specification for non-returnable spools made from thermoplastic material
|
|
JB/T 8135.34-2013
|
Packaging of winding wires. Part 34: Taper barrelled dilivery spools. Basic dimensions of containers for taper barrelled delivery spools
|
|
JB/T 8135.35-2013
|
Packaging of winding wires. Part 35: Taper barrelled delivery spools. Specification for spool containers made from thermoplastic material
|
|
JB/T 8135.41-2013
|
Packaging of winding wires. Part 41: methods of test. Delivery spools made from thermoplastic materials
|
|
JB/T 8135.42-2013
|
Packaging of winding wires. Part 42: Methods of test. containers made from thermoplastic materials for taper barrelled delivery spools
|
|
JB/T 5331-2011
|
Particular types of aromatic polyimide tape wrapped round copper wire for submersible motor
|
|
JB/T 10930-2010
|
Corona-resistant enamelled copper wires, class 200
|
|
JB/T 4279.10-2008
|
Verification procedure for test equipment of enamelled winding wire. Part 10: Tester for resistance to solvents
|
|
JB/T 4279.11-2008
|
Verification procedure for test equipment of enamelled winding wire. Part 11: Breakdown voltage tester
|
|
JB/T 4279.1-2008
|
Verificaflon procedure for test equipment of enamelled winding wire. Part 1: General
|
|
JB/T 4279.12-2008
|
Verification procedure for test equipment of enamelled winding wire. Part 12: Continuity of insulation tester (low voltage method)
|
|
JB/T 4279.13-2008
|
Verification procedure for test equipment of enamelled winding wire. Part 13: Continuity of insulation tester (high-voltage method)
|
|
JB/T 4279.14-2008
|
Verification procedure for test equipment of enamelled winding wire. Part14: Solderability tester
|
|
JB/T 4279.15-2008
|
Verification procedure for test equipment of enamelled winding wire. Part15: To-and-fro scraping tester
|
|
JB/T 4279.16-2008
|
Verification procedure for test equipment of enamelled winding wire. Part16: Static friction coefficient tester
|
|
JB/T 4279.17-2008
|
Verification procedure for test equipment of enamelled winding wire. Part17: Dynamic friction coefficient tester
|
|
JB/T 4279.18-2008
|
Verification procedure for test equipment of enamelled winding wire. Part1: Resistance to refrigerants tester
|
|
JB/T 4279.2-2008
|
Verificafion procedure for test equipment of enamelled winding wire. Part 2: DC electrical resistance tester
|
|
JB/T 4279.3-2008
|
Verificafion procedure for test equipment of enamelled winding wire. Part 3: Elongation tester
|
|
JB/T 4279.4-2008
|
Verificafion procedure for test equipment of enamelled winding wire. Part 4: Springness tester
|
|
JB/T 4279.5-2008
|
Verification procedure for test equipment of enamelled winding wire. Part 5: Jerk tester
|
|
JB/T 4279.6-2008
|
Verification procedure for test equipment of enamelled winding wire. Part 6: Peeling tester
|
|
JB/T 4279.7-2008
|
Verification procedure for test equipment of enamelled winding wire. Part 7: Forced circulating-air oven
|
|
JB/T 4279.8-2008
|
Verification procedure for test equipment of enamelled winding wire. Part 8: Cut-through tester
|