|
Std ID |
Description (Standard Title) |
|
GB/T 12529.5-1990
|
Graphic symbols and codes for grain and oil industry--Storing and handling
|
|
GB/T 12529.5-2010
|
Graphic symbols and codes for grain and oil industry -- Part 5: Storing and handling
|
|
GB/T 12530-1990
|
Edible fungi-Sampling
|
|
GB/T 12531-1990
|
Determination of moisture in edible fungi
|
|
GB/T 12532-1990
|
Determination of ash in edible fungi
|
|
GB/T 12532-2008
|
Determination of total ash content in edible mushroom
|
|
GB/T 12533-1990
|
Determination of micellaneous matter in edible fungi
|
|
GB/T 12533-2008
|
Determination of extraneous matter in edible mushroom
|
|
GB/T 11027-1999
|
Specification for insulating varnishes containing solvent--Specifications for individual materials--Requirements for hot curing impregnating varnishes
|
|
GB/T 12535-1990
|
Motor vehicles--Starting performance--Test methods
|
|
GB/T 11028-1989
|
Test method for the evaluation of bond strength of impregnating varnishes by the wire bundle test
|
|
GB/T 12536-1990
|
Motor vehicles. Coastdown. Test method
|
|
GB/T 12537-1990
|
Motor vehicles. Towing performance. Test method
|
|
GB/T 12538-1990
|
Motor vehicles. Height of gravity center. Measuring method
|
|
GB/T 12538-2003
|
Road vehicles with two axles -- Determination of centre of gravity
|
|
GB/T 12539-1990
|
Motor vehicles. Steep hill climbing. Test method
|
|
GB/T 12540-1990
|
Motor vehicles--Minimum turning diameter--Method of measurment
|
|
GB/T 10051.12-2010
|
Lifting hooks -- Part 12: Safety latch for lifting hook
|
|
GB/T 10051.13-2010
|
Lifting hooks -- Part 13: Technical conditions for laminated hooks
|
|
GB/T 12542-1990
|
Motor vehicles--Cooling capacity for engine cooling system--Test method on road
|
|
GB/T 12542-2009
|
Thermal balance capacity on-road test method for motor vehicles
|
|
GB/T 12543-1990
|
Motor vehicles--Acceleration performance--Test method
|
|
GB/T 10051.14-2010
|
Lifting hooks -- Part 14: Inspection of laminated hooks in service
|
|
GB/T 12544-1990
|
Motor vehicles--M!ximum speed--Test method
|
|
GB/T 10051.15-2010
|
Lifting hooks -- Part 15: Laminated hooks with point
|
|
GB/T 12545.1-2001
|
Passenger car -- Fuel consumption test method
|
|
GB/T 12545.1-2008
|
Measurement methods of fuel consumption for automobiles -- Part 1: Measurement methods of fuel consumption for passenger cars
|
|
GB/T 12545.2-2001
|
Commercial vehicle -- Fuel consumption test method
|
|
GB/T 12545-1990
|
Motor vehicles--Fuel consumption test method
|
|
GB/T 12546-1990
|
Motor vehicles--Ventilation and heat insulation--Test method
|
|
GB/T 10051.2-1988
|
Lifting hooks--Technical conditions of shank hook
|
|
GB/T 12547-1990
|
Motor vehicles--Minimum stable speed--Test method
|
|
GB/T 10051.3-2010
|
Lifting hooks -- Part 3: Inspection of forged hooks in service
|
|
GB/T 12548-1990
|
Motor vehicles. Speedometer and odometer. Calibration method
|
|
GB/T 10051.4-1988
|
Lifting hooks--Blanks of shank hook with point
|
|
GB/T 12549-1990
|
Automotive controllability and stability--Terms and definitions
|
|
GB/T 12549-2013
|
Terms and definitions for vehicle controllability and stability
|
|
GB/T 12550-1990
|
Motor vehicles--Air horn flange of carburators--Mounting dimensions
|
|
GB/T 12551-1990
|
Flange of diaphragm type fuel pumps--Mounting dimensions
|
|
GB/T 12552-1990
|
Maximal safety depths for commercial diving
|
|
GB/T 12553-2005
|
Fire performance requirements and test methods for fire fight vessels
|
|
GB/T 12554-1990
|
Specification of injection mould for plastics
|
|
GB/T 12554-2006
|
Specification of injection moulds for plastics
|
|
GB/T 12555.10-1990
|
Injection mould for plastic large-size mould bases--Guide pins for ejector plater
|
|
GB/T 12555.11-1990
|
Injection mould for plastic large-size mould bases--Straight guide bushes
|
|
GB/T 12555.1-1990
|
Injection mould for plastic large-size mould bases --Standard mould bases
|
|
GB/T 12555.12-1990
|
Injection mould for plastic large-size mould bases--Guide bushes with head
|
|
GB/T 12555.13-1990
|
Injection mould for plastic large-size mould bases--Return pins
|
|
GB/T 12555.14-1990
|
Injection mould for plastic large-size mould bases--Liner bushes
|
|
GB/T 12555.15-1990
|
Injection mould for plastic large-size mould bases--Stop plates
|
|
GB/T 12555.2-1990
|
Injection mould for plastic large-size mould bases--Specification
|
|
GB/T 12555.3-1990
|
Injection mould for plastic large-size mould bases--Elamping plates
|
|
GB/T 12555.4-1990
|
Injection mould for plastic large-size mould bases--Mould plates
|
|
GB/T 12555.5-1990
|
Injection mould for plastic large-size mould bases--Support plates
|
|
GB/T 12555.6-1990
|
Injection mould for plastic large-size mould bases--Ejector plates
|
|
GB/T 12555.7-1990
|
Injection mould for plastic large-size mould bases--Spacer plates
|
|
GB/T 12555.8-1990
|
Injection mould for plastic large-size mould bases--Guide pillars with head
|
|
GB/T 12555.9-1990
|
Injection mould for plastic large-size mould bases--Guide pillars with shoulder
|
|
GB/T 12555-2006
|
Injection mould bases for plastics
|
|
GB/T 12556.1-1990
|
Injection mould for plastic--Medium size and small size mould bases
|
|
GB/T 12556.2-1990
|
Injection mould for plastic--Specifications for medium size and small size mould bases
|
|
GB/T 12556-2006
|
Specification of injection mould bases for plastics
|
|
GB/T 12558-1990
|
Testing method for elements of universal modular jig and fixture system with slots
|
|
GB/T 12559-1990
|
The patternes series for artwork master of printed circuits
|
|
GB/T 12560-1990
|
Semiconductor devices--Sectional specification for discrete devices
|
|
GB/T 12560-1999
|
Semiconductor devices. Sectional specification for discrete devices
|
|
GB/T 12561-1990
|
Blank detail specification for light emitting diodes
|
|
GB/T 12562-1990
|
Blank detail specification for PIN diodes
|
|
GB/T 12563-1990
|
Requirements of terrestrial interface for domestic satellite communications carth stations
|
|
GB/T 12564-1990
|
Generic specification for photomultiplier tubes
|
|
GB/T 12564-2008
|
Generic specification for photomultiplier tubes
|
|
GB/T 12565-1990
|
Semiconductor devices. Sectional specification for optoelectronic devices
|
|
GB/T 12566-1990
|
Interface for signal chain of sound and television broadcasting transmitting equipments
|
|
GB/T 12567-1990
|
Methods of measurement of display storage tubes
|
|
GB/T 12568-1990
|
Sectional specification for display storage tubes
|
|
GB/T 12569-1990
|
Blank detail specification for display storage tubes
|
|
GB/T 12570-1990
|
Blank detail specification for monochrome display tubes
|
|
GB/T 12571-1990
|
Methods of measurement of monochrome display tubes
|
|
GB/T 12572-1990
|
Frequency tolerance for transmitter
|
|
GB/T 12572-2008
|
Universal requirements and measurement methods of parameters for radio transmitting equipment
|
|
GB/T 11028-1999
|
Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
|
|
GB/T 12574-1990
|
Jet fuels. Determination of total acid number
|
|
GB/T 12575-1990
|
Liquid fuel oils. Determination of vanadium content. Flameless atomic absorption spectroscopic method
|
|
GB/T 12576-1990
|
liquefied petrorum gases--calculation of vapour pressure and relative density
|
|
GB/T 12576-1997
|
Liquified petroleum gases. Calculation of vapour pressure and relative density and octane number
|
|
GB/T 12577-1990
|
Refrigerator oils. Determination of floc point
|
|
GB/T 12578-1990
|
Lubricating oil. Determination of flow ability. U-tube method
|
|
GB/T 12579-1990
|
Lubricating oils--Determination of foaming characteristics
|
|
GB/T 12579-2002
|
Determination of foaming characteristics of lubricating oils
|
|
GB/T 12580-1990
|
Inhibited mineral insulating oils. Determination of oxidation stability
|
|
GB/T 12581-1990
|
Inhibited mineral oils--Determination of oxidation characteristics
|
|
GB/T 10051.4-2010
|
Lifting hooks -- Part 4: Blanks of shank hook with point
|
|
GB/T 12582-1990
|
Liquid hydrocarbons. Determination of electrical conductivity. Precision meter
|
|
GB/T 12583-1990
|
Lubricants--Determination of extreme pressure properties--Four ball method
|
|
GB/T 12583-1998
|
Standard test method for measurement of extreme-pressure properties of lubricating fluids (four-ball method)
|
|
GB/T 12584-1990
|
Rubber or plastics coated fabrics--Low temperature impact test
|
|
GB/T 12584-2001
|
Rubber or plastics coated fabrics -- Low-temperature impact test
|
|
GB/T 12584-2008
|
Rubber or plastics-coated fabrics -- Low-temperature impact test
|
|
GB/T 12585-1990
|
Fabrics coated with vulcanized rubber--Determination of vapour transmission rate of volatile liquids (gravimetric technique)
|
|
GB/T 12585-2001
|
Rubber -- Vulcanized of thermoplastic -- Rubber sheet and rubber-coated fabric -- Determination rate of volatile liquids (gravimetric technique)
|