|
Std ID |
Description (Standard Title) |
|
GB/T 12548-2016
|
Motor vehicles speedometer and odometer calibration method
|
|
GB/T 12817-2004
|
General technical specification of railway passenger car
|
|
GB/T 12939-2015
|
Rims for industrial vehicles
|
|
GB/T 13203-2014
|
Test methods for verifying capabilities of motorcycle tyres
|
|
GB/T 14365-1993
|
Acoustics. Measurement of noise emitted by stationary road vehicles
|
|
GB/T 14951-2007
|
Measurement method of fuel saving technology for automobiles
|
|
GB/T 15089-2001
|
Classification of power-driven vehicles and trailers
|
|
GB/T 17477-2012
|
Automotive gear lubricant viscosity classification
|
|
GB/T 17619-1998
|
Limits and methods of testing for immunity of electrical/electronic sub-assemblies in vehicles to electromagnetic radiation
|
|
GB/T 18166-2008
|
Specifications of amusement rides monorail category
|
|
GB/T 18183-2017
|
Fatigue test method for automotive synchronous belt
|
|
GB/T 18305-2016
|
Quality management systems -- Particular requirements for the application of GB/T 19001--2008 for automotive production and relevant service part organizations
|
|
GB/T 18333.1-2001
|
Lithium-ion batteries for electric road vehicles [Same as GB/Z 18333.2-2001]
|
|
GB/T 18333.2-2015
|
Zinc-air batteries for electric road vehicle
|
|
GB/T 18344-2016
|
Specification for the inspection and maintenance of motor vehicle
|
|
GB/T 18384.1-2015
|
Electrically propelled road vehicles -- Safety specifications -- Part 1: On-board rechargeable energy storage system (REESS)
|
|
GB/T 18384.2-2015
|
Electrically propelled road vehicles -- Safety specifications -- Part 2: Vehicle operational safety means and protection against failures
|
|
GB/T 18384.3-2015
|
[Including 2017-XG1 Modification] Electrically propelled road vehicles -- Safety specifications -- Part 3: Protection of persons against electric shock
|
|
GB/T 18385-2005
|
Electric vehicles -- Power performance -- Test method
|
|
GB/T 18386-2005
|
Electric vehicles -- Energy consumption and range -- Test procedures
|
|
GB/T 18387-2008
|
Limits and test method of magnetic and electric field strength from electric vehicles, broadband, 9kHz to 30MHz
|
|
GB/T 18387-2017
|
Limits and test method of magnetic and electric field strength from electric vehicles
|
|
GB/T 18388-2005
|
Electric vehicles -- Engineering approval evaluation program
|
|
GB/T 18487.1-2001
|
Electric vehicle conductive charging system -- Part 1: General requirements
|
|
GB/T 18487.1-2015
|
Electric vehicle conductive charging system -- Part 1: General requirements
|
|
GB/T 18487.2-2001
|
Electric vehicle conductive charging system -- Electric vehicles requirements for conductive connection to an AC/DC supply
|
|
GB/T 18487.3-2001
|
Electric vehicle conductive charging system AC/DC Electric vehicle charging station
|
|
GB/T 18488.1-2006
|
The electrical machines and controllers for electric vehicles -- Part 1: General specification
|
|
GB/T 18488.1-2015
|
Drive motor system for electric vehicles -- Part 1: Specification
|
|
GB/T 18488.2-2006
|
The electrical machines and controllers for electric vehicles -- Part 2: Test methods
|
|
GB/T 18488.2-2015
|
Drive motor system for electric vehicles -- Part 2: Test methods
|
|
GB/T 18655-2010
|
Vehicles, boats and internal combustion engines -- Radio disturbance characteristics -- Limits and methods of measurement for the protection of on-board receivers
|
|
GB/T 19055-2003
|
Reliability test methods for motor vehicle engines
|
|
GB/T 19056-2012
|
Vehicle travelling data recorder
|
|
GB/T 19389-2016
|
Test method of measuring rolling circumference for truck tyres
|
|
GB/T 19515-2015
|
Road vehicles -- Recyclability and recoverability -- Calculation method
|
|
GB/T 19596-2004
|
Terminology of electric vehicles
|
|
GB/T 19750-2005
|
Hybrid electric vehicles -- Engineering approval evaluation program
|
|
GB/T 19751-2005
|
Hybrid electric vehicles safety specification [Including modifications 1, 2]
|
|
GB/T 19753-2013
|
Test methods for energy consumption of light-duty hybrid electric vehicles
|
|
GB/T 19836-2005
|
Instrumentation for electric vehicles
|
|
GB/T 19951-2005
|
Road vehicles -- Test methods for electrical disturbances from electrostatic discharge
|
|
GB/T 20234.1-2011
|
Connection set for conductive charging for electric vehicles -- Part 1: General requirements
|
|
GB/T 20234.1-2015
|
Connection set for conductive charging of electric vehicles -- Part 1: General requirements
|
|
GB/T 20234.2-2011
|
Connection set for conductive charging of electric vehicles -- Part 2: AC charging coupler
|
|
GB/T 20234.2-2015
|
Connection set for conductive charging of electric vehicles -- Part 2: AC charging coupler
|
|
GB/T 20234.3-2011
|
Connection set for conductive charging of electric vehicles -- Part 3: DC charging coupler
|
|
GB/T 20234.3-2015
|
Connection set for conductive charging of electric vehicles -- Part 3: DC charging coupler
|
|
GB/T 20564.6-2010
|
Continuously cold rolled high strength steel sheet and strip for automobile -- Part 6: Transformation induced plasticity steel
|
|
GB/T 20564.8-2015
|
Continuously cold rolled high strength steel sheet and strip for automobile -- Part 8: Complex phase steel
|
|
GB/T 20734-2006
|
Mounting requirements for liquefied natural gas vehicle special equipment
|
|
GB/T 20735-2006
|
Pressure regulator of CNG vehicles
|
|
GB/T 20887.1-2007
|
Continuously hot rolled high strength steel sheet and strip for automobile -- Part 1: High yield strength steel for cold forming
|
|
GB/T 21437.1-2008
|
Road vehicles -- Electrical disturbances from conduction and coupling -- Part 1: Definitions and general considerations
|
|
GB/T 21437.2-2008
|
Road vehicles -- Electrical disturbances from conduction and coupling -- Part 2: Electrical transient conduction along supply lines only
|
|
GB/T 21437.3-2012
|
Road vehicles -- Electrical disturbances from conduction and coupling -- Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
|
|
GB/T 21563-2008
|
Railway applications -- Rolling stock equipment -- Shock and vibration tests
|
|
GB/T 22030-2015
|
Blend stocks of ethanol gasoline for motor vehicles
|
|
GB/T 22199-2008
|
Sealed lead-acid battery used for moped
|
|
GB/T 22309-2008
|
Road vehicles -- Brake linings -- Shear teat procedure for disc brake pad and drum brake shoe assemblies
|
|
GB/T 23436-2009
|
Windshield cleaning fluid
|
|
GB/T 23645-2009
|
Test methods of fuel cell power system for passenger cars
|
|
GB/T 23799-2009
|
Methanol gasoline (M85) for motor vehicles
|
|
GB/T 24347-2009
|
The DC/DC converter for electric vehicles
|
|
GB/T 24545-2009
|
Requirement of speed limitation system for motor vehicles
|
|
GB/T 24548-2009
|
Fuel cell electric vehicles - Terminology
|
|
GB/T 24549-2009
|
Fuel cell electric vehicles -- Safety requirements
|
|
GB/T 24550-2009
|
The protection of motor vehicle for pedestrians in the event of a collision
|
|
GB/T 24551-2009
|
Safety belt reminder for motor vehicles
|
|
GB/T 24552-2009
|
Electric vehicles -- Windshield demisters and defrosters system -- Performance requirements and test methods
|
|
GB/T 25087-2010
|
Road vehicles -- Round, screened and unscreened 60V and 600V multi-core sheathed cables
|
|
GB/T 25089-2010
|
Road vehicles -- Data cables
|
|
GB/T 25319-2010
|
Fuel cell power system used for motor vehicles - Technical specification
|
|
GB/T 25348-2010
|
Technical specification of fuel saving products for automobiles
|
|
GB/T 25349-2010
|
Technical specification for inspection and maintenance of vehicle using ethanol gasoline
|
|
GB/T 25350-2010
|
Technology specification for cleaning fuel supply system of ethanol gasoline vehicles
|
|
GB/T 25978-2010
|
Road vehicle -- Plate and label
|
|
GB/T 25986-2010
|
Filling device of natural gas vehicles
|
|
GB/T 26649-2011
|
Magnesium alloy castings for automobile wheels
|
|
GB/T 26774-2016
|
Technical specification for car carriers
|
|
GB/T 26779-2011
|
[Including Amendment 2018XG1] Fuel cell electric vehicles -- Refueling receptacle
|
|
GB/T 26780-2011
|
The safety requirement of fuel system for compressed natural gas vehicle in the collision
|
|
GB/T 26949.13-2017
|
Industrial trucks -- Verification of stability -- Part 13: Rough-terrain trucks with mast
|
|
GB/T 26949.4-2016
|
Industrial trucks -- Verification of stability -- Part 4: Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1200mm lift height
|
|
GB/T 26949.8-2016
|
Industrial trucks -- Verification of stability -- Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated
|
|
GB/T 26980-2011
|
Liquefied natural gas (LNG) vehicular fueling systems code
|
|
GB/T 26988-2011
|
Marks for recoverability of automobile parts
|
|
GB/T 26990-2011
|
[Including 2020XG1] Fuel cell electric vehicles -- Onboard hydrogen system -- Specifications
|
|
GB/T 26991-2011
|
Fuel cell electric vehicles -- Maximum speed test method
|
|
GB/T 27630-2011
|
Guideline for air quality assessment of passenger car
|
|
GB/T 27930-2011
|
Communication protocols between off-board conductive charger and battery management system for electric vehicle
|
|
GB/T 27930-2015
|
Communication protocols between off-board conductive charger and battery management system for electric vehicle
|
|
GB/T 28046.1-2011
|
Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 1: General
|
|
GB/T 28046.2-2011
|
Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 2: Electrical loads
|
|
GB/T 28046.3-2011
|
Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 3: Mechanical loads
|
|
GB/T 28046.4-2011
|
Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 4: Climatic loads
|
|
GB/T 28382-2012
|
Battery electric passenger cars -- Specifications
|
|
GB/T 28542-2012
|
Road Vehicles Jump-Start Cables
|
|
GB/T 28569-2012
|
Electric energy metering for electric vehicle AC charging spot
|
|
GB/T 28767-2012
|
Classification of automotive gear lubricants
|