|
Std ID |
Description (Standard Title) |
|
GB 3836.11-2008
|
[GB/T 3836.11-2008] Explosive atmospheres -- Part 11: Equipment protection by flameproof enclosures “d” -- Method of test for ascertainment of maximum experimental safe gap
|
|
GB 3836.12-2008
|
[GB/T 3836.12-2008] Explosive atmospheres -- Part 12: Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting current
|
|
GB 12476.3-2007
|
Electrical apparatus for use in the presence of combustible dust -- Part 3: Classification of areas where combustible dusts are or may be present
|
|
GB 20936.1-2007
|
Electrical apparatus for the detection and measurement of flammable gases -- Part 1: General requirement and test methods
|
|
GB 3836.17-2007
|
Electrical apparatus for explosive gas atmosphere -- Part 17: Construction and use of rooms or building protected by pressurization
|
|
GB 12476.2-2006
|
Electrical apparatus for combustible dust -- Part 1: The surface temperature of the housing and restrictions to protect electrical equipment -- Section 2: Select the electrical equipment, installation and maintenance
|
|
GB 20800.1-2006
|
General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres -- Part 1: Group II engines for use in flammable gas and vapor atmospheres
|
|
GB 20800.2-2006
|
General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres -- Part 2: Group II engines for use in flammable dust atmospheres
|
|
GB 3836.16-2006
|
Electrical apparatus for explosive gas atmospheres -- Part 16: Inspection and maintenance of electrical installation (other than mines)
|
|
GB 3836.9-2006
|
Electrical apparatus for explosive gas atmospheres -- Part 9: Encapsulation m
|
|
GB 19854-2005
|
General rules of explosion-proof techniques of industrial trucks for explosive atmospheres
|
|
GB 19518.1-2004
|
Electrical apparatus for explosive gas atmospheres -- Electrical resistance trace heating -- Part 1: General and testing requirements
|
|
GB 3836.5-2004
|
Electrical apparatus for explosive gas atmosphere -- Part 5: Pressurized enclosures “p”
|
|
GB 3836.6-2004
|
Electrical apparatus for explosive gas atmosphere -- Part 6: Oil-immersion “o”
|
|
GB 3836.7-2004
|
Electrical apparatus for explosive gas atmosphere -- Part 7: Power filling “q”
|
|
GB 3836.8-2003
|
Electrical apparatus for explosive gas atmospheres -- Part 8: Type of protection “n”
|
|
GB 7957-2003
|
General requirements for safety of cap lamp
|
|
GB 12476.1-2000
|
Electrical apparatus for use in the presence of combustible dust--Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation-Specification for apparatus
|
|
GB 3836.1-2000
|
Electrical apparatus for explosive gas atmospheres-Part 1: General requirements
|
|
GB 3836.14-2000
|
Electrical apparatus for explosive gas atmospheres. Part 14: Classification of hazardous areas
|
|
GB 3836.15-2000
|
Electrical apparatus for explosive gas atmospheres. Part 15: Electrical installation in hazardous areas (other than mines)
|
|
GB 3836.2-2000
|
Electrical apparatus for explosive gas atmospheres-Part 2: Flameproof enclosure d
|
|
GB 3836.3-2000
|
Electrical apparatus for explosive gas atmospheres-Part 3: Increased safety e
|
|
GB 3836.4-2000
|
Electrical apparatus for explosive gas atmospheres. Part 4: Intrinsic safety“i”
|
|
GB 7958-2000
|
Capacitor discharge type exploders for coal mines
|
|
GB 3836.13-1997
|
Electrical apparatus for explosive gas atmospheres. Part 13: Repair and overhaul for apparatus used in explosive gas atmospheres
|
|
GB 3836.10-1991
|
Electrical apparatus for explosive atmospheres--Hermetically sealed electrical apparatus h
|
|
GB 3836.11-1991
|
Electrical apparatus for explosive atmospheres--Method of test for ascertainment of maximum experimental safe gap
|
|
GB 3836.12-1991
|
Electrical apparatus for explosive atmospheres--Classification of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents
|
|
GB 12476.1-1990
|
Electrical apparatus for explosive dust atmosphere--Dust ignition-proof apparatus
|
|
GB 3836.9-1990
|
Electrical apparatus for explosive atomspheres--Encapsulated electrical apparatus m
|
|
GB 1444-1987
|
Edison screw lampholders specially used for explosion-proof luminaires
|
|
GB 3836.5-1987
|
Electrical apparatus for explosive atmospheres--Pressurized electrical apparatusp
|
|
GB 3836.19-2010
|
Explosive atmospheres -- Part 19: Fieldbus intrinsically safe concept (FISCO)
|
|
GB 3836.20-2010
|
Explosive atmospheres -- Part 20: Equipment with equipment protection level (EPL) Ga
|
|
GB 3836.2-2010
|
[Replaced by GB/T 3836.2-2021] Explosive atmospheres -- Part 2: Equipment protection by flameproof enclosures d
|
|
GB 3836.3-2010
|
[Replaced by GB/T 3836.3-2021] Explosive atmospheres -- Part 3: Equipment protection by increased safety “e”
|
|
GB 3836.4-2010
|
[Replaced by GB/T 3836.4-2021] Explosive atmospheres -- Part 4: Equipment protection by intrinsic safety i
|
|
GB 20936.2-2009
|
Electrical apparatus for the detection and measurement of flammable gases -- Part 2: Performance requirements for group I apparatus indicating a volume fraction up to 5% methane in air
|
|
GB 7957.2-2009
|
Cap lights for use in mines susceptible to firedamp -- Part 2: Performance and other safety-related matters
|
|
GB 20800.3-2008
|
General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres -- Part 3: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
|
|
GB 20936.4-2008
|
Electrical apparatus for the detection and measurement of flammable gases -- Part 4: Performance requirements for group II apparatus indicating a volume fraction up to 100% gas
|
|
GB 22380.1-2008
|
Explosion protected safety technique of the petrol filling station -- Part 1: Explosion protected safety technique requirements for fuel filling dispenser
|
|
GB 3836.6-1987
|
Electrical apparatus for explosive atmospheres--Oil immersed electrical apparatuso
|
|
GB 3836.7-1987
|
Electrical apparatus for explosive atmospheres--Sand filled electrical apparatus q
|
|
GB 3836.8-1987
|
Electrical apparatus for explosive atmospheres--Non-sparking electrical apparatus n
|
|
GB 5590-1985
|
Mining type flameproof electric magnetic starters
|
|
GB 1336-1977
|
Inspection rules electrical apparatus for explosive atmosphere
|
|
GB 16836-1997
|
General requirements of safety design for measuring relays and protection equipment
|
|
GB/Z 22074-2016
|
Reliability test method for moulded-case circuit-breakers
|
|
GB/Z 22074-2008
|
Reliability test method for moulded case circuit-breakers
|
|
GB 10232-1988
|
Test and measurement procedures for electromechanical all-or-nothing relays
|
|
GB 3665-1983
|
Timer for household electric washing machine
|
|
GB/Z 22200-2016
|
Reliability test method for lower capacity alternating current contactors
|
|
GB/Z 22201-2016
|
Reliability test method for contractor relay
|
|
GB 31459-2015
|
[GB/T 31459-2015] Safety requirements for temperature control systems for floor heating for household and similar use
|
|
GB 14536.16-2013
|
[GB/T 14536.16-2013] Automatic electrical controls for household and similar use -- Particular requirements for electric actuators
|
|
GB 14048.4-2010
|
[Replaced by GB/T 14048.4-2020] Low-voltage switchgear and control gear -- Part 4-1: Contactors and motor-starters -- Electromechanical contactors and motor-starters (Including motor protector)
|
|
GB 14536.12-2010
|
[GB/T 14536.12-2010] Automatic electrical controls for household and similar use -- Particular requirements for energy regulators
|
|
GB 14536.7-2010
|
[GB/T 14536.7-2010] Automatic electrical control for household and similar use -- Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
|
|
GB 14536.8-2010
|
[GB/T 14536.8-2010] Automatic electrical controls for household and similar use -- Particular requirements for timers and time switches
|
|
GB 17885-2009
|
Electromechanical contactors for household and similar purposes
|
|
GB 14048.9-2008
|
[GB/T 14048.9-2008] Low-voltage switchgear and controlgear -- Part 6-2: Multiple function equipment -- Control and protective switching devices (or equipment) (CPS)
|
|
GB 14536.11-2008
|
[GB/T 14536.11-2008] Automatic electrical controls for household and similar use -- Particular requirements for motor-starting relays
|
|
GB 14536.1-2008
|
[GB/T 14536.1-2008] Automatic electrical controls for household and similar use -- Part 1: General requirements
|
|
GB 14536.13-2008
|
[GB/T 14536.13-2008] Automatic electrical controls for household and similar use -- Particular requirements for electrically operated door locks
|
|
GB 14536.15-2008
|
[GB/T 14536.15-2008] Automatic electrical controls for household and similar use -- Particular requirements for humidity sensing controls
|
|
GB 14536.20-2008
|
[GB/T 14536.20-2008] Automatic electrical controls for household and similar use -- Particular requirements for automatic electric water and air flow sensing controls, including mechanical requirements
|
|
GB 14536.21-2008
|
[GB/T 14536.21-2008] Automatic electrical controls for household and similar use -- Particular requirements for electrically operated oil valves, including mechanical requirements
|
|
GB 14536.3-2008
|
[GB/T 14536.3-2008] Automatic electrical controls for household and similar use -- Particular requirements for thermal motor protectors
|
|
GB 14536.4-2008
|
[GB/T 14536.4-2008] Automatic electrical controls for household and similar use -- Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps
|
|
GB 14536.5-2008
|
[GB/T 14536.5-2008] Automatic electrical controls for household and similar use -- Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type
|
|
GB 14536.6-2008
|
[GB/T 14536.6-2008] Automatic electrical controls for household and similar use -- Particular requirements for automatic electrical burner control systems
|
|
GB 14536.9-2008
|
[GB/T 14536.9-2008] Automatic electrical controls for household and similar use -- Particular requirements for electrically operated water valves, including mechanical requirements
|
|
GB/Z 22200-2008
|
Reliability test method for lower capacity alternating current contactors
|
|
GB/Z 22201-2008
|
Reliability test method for contactor relay
|
|
GB 14048.4-2003
|
Low-voltage switchgear and controlgear -- Electromechanical contactors and motor-starters
|
|
GB 14048.5-2001
|
Low-voltage switchgear and controlgear -- Part 5-1: Control circuit devices and switching element Electromechanical control circuit devices
|
|
GB 8871-2001
|
[GB/T 8871-2001] Energy saver for AC contactors
|
|
GB 17885-1999
|
Electromechanical contactors for household and similar purposes
|
|
GB 14048.6-1998
|
Low-voltage switchgear and controlgear. Contactors and motor-starters. Section 2: AC semiconductor motor controllers and starters
|
|
GB 14048.9-1998
|
Low-voltage switchgear and controlgear. Multiple function equipment. Section 2: Control and protective switching devices (or equipment) (CPS)
|
|
GB 14536.1-1998
|
Automatic electrical controls for household and similar use. Part 1: General requirements
|
|
GB 14048.4-1993
|
Low-voltage switchgear and controlgear. Low-voltage electromechanical contactors and motor starters
|
|
GB 14048.5-1993
|
General rules for low-voltage switchgear and control-gear control circuit devices and switching elements section one. Electromechanical control circuit device
|
|
GB 15092.1-2000
|
Switches for appliances Part 1: General requirements
|
|
GB/Z 43030-2023
|
Low-voltage switchgear and controlgear - Security aspects
|
|
GB/Z 43533-2023
|
Integration of internal arc-fault mitigation systems in power switchgear and controlgear assemblies(PSC-assemblies) according to GB/T 7251.2-2023
|
|
GB/Z 40680-2021
|
General requirements for residual current operated protective devices for D. C. system
|
|
GB/Z 36281-2018
|
Residual current devices (RCDs) associated with additional function (s)
|
|
GB/Z 22202-2016
|
Reliability test method of residual current operated circuit-breakers for household and similar uses
|
|
GB/Z 22203-2016
|
Reliability test method of circuit-breakers for overcurrent protection for household and similar installation
|
|
GB/Z 22204-2016
|
Reliability test method for overload relay
|
|
GB/Z 32513-2016
|
General rules of reliability for low voltage apparatus
|
|
GB 7251.6-2015
|
[GB/T 7251.6-2015] Low-voltage switchgear and controlgear assemblies -- Part 6: Busbar trunking systems (busways)
|
|
GB 15092.2-2014
|
[GB/T 15092.2-2014] Switches for appliances -- Part 2: Particular requirements for cord switches
|
|
GB 15092.3-2014
|
[GB/T 15092.3-2014] Switches for appliances -- Part 2: Particular requirements for change-over selectors
|
|
GB 16916.1-2014
|
[GB/T 16916.1-2014] Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB) -- Part 1: General rules
|
|
GB 16917.1-2014
|
[GB/T 16917.1-2014] Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) -- Part 1: General rules
|
|
GB 7251.1-2013
|
[GB/T 7251.1-2013] Low-voltage switchgear and controlgear assemblies -- Part 1: General rules
|