Path:
Home >
YB/T >
Page21 > YB/T 5126-2003
Price & Delivery
US$359.00 · In stock · Download in 9 secondsYB/T 5126-2003: Steel bars for teinforcement of concrete. Bend and rebend tests
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See
step-by-step procedureStatus: Obsolete
YB/T 5126: Historical versions
| Std ID | Version | USD | Buy | Deliver [PDF] in | Title (Description) |
| YB/T 5126-2003 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Steel bars for teinforcement of concrete. Bend and rebend tests
|
| YB/T 5126-1993 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Steel reinforcement bar-plane rebend test method
|
Click to Preview a similar PDF
Basic data
| Standard ID | YB/T 5126-2003 (YB/T5126-2003) |
| Description (Translated English) | Steel bars for teinforcement of concrete. Bend and rebend tests |
| Sector / Industry | Ferrous Metallurgy Industry Standard (Recommended) |
| Classification of Chinese Standard | H23 |
| Classification of International Standard | 77.040.10 |
| Word Count Estimation | 9,928 |
| Date of Issue | 2003-12-29 |
| Date of Implementation | 2004-05-01 |
| Older Standard (superseded by this standard) | YB/T 5126-1993 |
| Quoted Standard | GB/T 2975; GB/T 232 |
| Adopted Standard | ISO 10065-1990; MOD |
| Summary | This standard applies to: reinforced concrete with steel bending and reverse bending test. Reverse bend test mesh is reinforced in order to measure the bending and plastic deformation after aging reverse bending performance. |
YB/T 5126-2003: Steel bars for teinforcement of concrete. Bend and rebend tests
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Steel bars for teinforcement of concrete.Bend and rebend tests
ICS 77.040.10
H23
Black metallurgical industry standard
Replace YB/T 5126-1993
Reinforced concrete reinforcement
Bending and reverse bending test method
(ISO 10065.1990, MOD)
Released on December 12,.2003
Implementation of.2004-05-01
National Development and Reform Commission released
Foreword
This standard is modified to adopt ISO 10065.1990 "Test Method for Bending and Reverse Bending of Reinforced Concrete" (English version).
This standard was redrafted in accordance with ISO 10065.1990. The standard chapter number and ISO 10065.1990 are listed in Appendix A.
The bar number comparison list.
Taking into account China's national conditions and basic technical principles, when adopting ISO 10065.1990, this standard has been modified, and the technical skills are poor.
Differences have been incorporated into the text and are identified by vertical single lines in the margins of the terms they refer to. These techniques are given in Appendix B.
A list of sexual differences and their causes for reference.
For ease of use, the following editorial changes have been made to this standard for ISO 10065.1990.
a) the words “this International Standard” are replaced by the words “this standard”;
b) delete the preface to ISO 10065.1990;
c) Standardize the use of legal units and symbols in China.
This standard replaces YB/T 5126-1993 "Reinforcement Plane Reverse Bending Test Method".
This standard has greatly modified and supplemented the technical content of YB/T 5126-1993 mainly in the following aspects.
--- Add Chapter 2 normative references, Chapter 8 test report;
--- Add an explanation of the principle of the test;
---Added and modified some symbols and definitions;
---Remove the relevant content of the original standard on the bending force arm formula;
--- Add a flap bending device that can accurately measure and control the bending and reverse bending angles in the test equipment, and delete the original correlation
content;
--- Adjusted the maximum speed of bending and reverse bending;
--- Increase the requirements for aging heat treatment temperature, holding time and equipment;
--- Delete the original Appendix A, cancel the division of the five categories of test results, only the "qualified" and "unqualified" assessment;
--- Increase the informative Appendix A, informative Appendix B;
--- Add Figure 1, Figure 2, Figure 3.
Appendix A and Appendix B of this standard are informative annexes.
This standard was proposed by the China Iron and Steel Association.
This standard is under the jurisdiction of the National Steel Standardization Technical Committee.
This standard was drafted. Chongqing Iron and Steel Research Institute, Iron and Steel Research Institute, Jinan Test Group Co., Ltd.
The main drafters of this standard. Sun Liangjin, Zhang Xinxin, Li Jiulin, and Yan Xiuying.
The previous versions of the standards replaced by this standard are.
---GB 5029-1985, YB/T 5126-1993.
Reinforced concrete reinforcement
Bending and reverse bending test method
1 Scope
This standard applies to the bending and reverse bending test of steel bars for reinforced concrete. The purpose of the reverse bending test is to determine the reinforcement
Bending plastic deformation and reverse bending deformation properties after aging.
2 Normative references
The terms in the following documents constitute provisions of this standard by reference to this standard. Any dated reference document, followed by
Some amendments (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study
Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard.
GB/T 2975 Steel and steel products, mechanical properties test sampling position and sample preparation (GB/T 2975-1998, eqv ISO 377.1997)
GB/T 232 metal material bending test method (GB/T 232-1999, eqv ISO 7438.1985)
3 Principle
The bending test is to force the two arms or one arm of the sample to make the sample a bending moment on the curved arc surface (curved center) of the specified diameter.
The test produces a plastic deformation around the arc surface to a specific angle.
The aging performance is tested by the reverse bending test, including the bending test and the aging heat treatment, and then the sample is reversely bent and reduced to a certain extent.
angle.
4 symbols and definitions
The symbols and definitions used in this standard are shown in Table 1.
Table 1 Symbols and definitions
Symbol definition unit
Groove width of the trough-shaped flap slider mm
D curved arc surface (curved center) diameter mm
D0 work roll diameter mm
α bending angle (°)
δ reverse bending angle (°)
5 test equipment
5.1 bending device
Figure 1 shows an example of a bending device. One roller is fixed, and the other roller bends the sample around a curved arc surface (curved center).
The two rolls are fixed, and the curved arc surface (curved center) is moved to the middle of the two rolls, so that the two arms of the sample are bent around the curved arc surface (curved center). Bending test
It can also be carried out according to GB/T 232 using a bending device equipped with an angle indicator on a universal testing machine.
5.2 Reverse bending device
Figure 2 shows an example of a reverse bending device in which the reverse bending angle can be indicated on the angle indicator. Bending and anti-bending
...
